Léa-Linux & amis :   LinuxFR   GCU-Squad   GNU
plus de cd-rom !
Envoyé par: panthere noire

Hello.

j'ai plus de cd-rom sous ma debian testing.:##
Pensant que sa viens du faite que c'est une mise a jours, j'ai voulu installer la versions stable sur un autres disque sata. et aux moment de détecter le cd-rom il ne le reconnaît pas, pour temps il a bien démarrer avec le cd. #%b

bref je tente donc de charger quelque module avec modconf.
voici la liste avec lsmod.

Module                  Size  Used by
vfat                   13056  0 
fat                    49564  1 vfat
via82cxxx               9732  0 [permanent]
trm290                  4996  0 [permanent]
triflex                 4608  0 [permanent]
tc86c001                5760  0 [permanent]
slc90e66                6400  0 [permanent]
sis5513                13704  0 [permanent]
siimage                12160  0 [permanent]
serverworks             9224  0 [permanent]
sc1200                  7680  0 [permanent]
rz1000                  3712  0 [permanent]
piix                   10500  0 [permanent]
pdc202xx_old           10496  0 [permanent]
pdc202xx_new            8832  0 [permanent]
opti621                 5252  0 [permanent]
ns87415                 5192  0 [permanent]
jmicron                 4992  0 [permanent]
it821x                  8836  0 [permanent]
it8213                  6272  0 [permanent]
hpt366                 16640  0 [permanent]
hpt34x                  6016  0 [permanent]
cy82c693                5380  0 [permanent]
cs5535                  5248  0 [permanent]
cs5530                  6272  0 [permanent]
cs5520                  5632  0 [permanent]
cmd64x                 10908  0 [permanent]
atiixp                  7056  0 [permanent]
amd74xx                14364  0 [permanent]
alim15x3               12300  0 [permanent]
aec62xx                 8192  0 [permanent]
isofs                  33856  0 
udf                    76548  0 
ide_generic             2304  0 [permanent]
ide_disk               16384  0 
ide_cd                 37536  0 
nvidia               7250260  24 
agpgart                33612  1 nvidia
ipt_owner               2944  4 
xt_state                3456  3 
xt_length               2944  2 
ts_bm                   3328  1 
xt_string               3328  1 
iptable_nat             8196  0 
nf_nat                 19244  1 iptable_nat
nf_conntrack_ipv4      18700  5 iptable_nat
nf_conntrack           60296  4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink               7448  3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_filter          3968  1 
binfmt_misc            12296  1 
ipt_ULOG                9476  114 
button                  8976  0 
ac                      6148  0 
battery                11012  0 
w83627ehf              18320  0 
usb_debug               3712  0 
k8temp                  6400  0 
hwmon_vid               3712  0 
i2c_isa                 6272  1 w83627ehf
loop                   17288  0 
snd_hda_intel          21144  1 
snd_hda_codec         199296  1 snd_hda_intel
snd_pcm_oss            40608  0 
snd_mixer_oss          16768  1 snd_pcm_oss
snd_pcm                73220  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer              22276  1 snd_pcm
snd                    50020  8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
rtc                    13592  0 
soundcore               9184  1 snd
snd_page_alloc         10504  2 snd_hda_intel,snd_pcm
i2c_i801                9232  0 
psmouse                35976  0 
i2c_core               22016  4 nvidia,w83627ehf,i2c_isa,i2c_i801
atl1                   33804  0 
serio_raw               7556  0 
mii                     6272  1 atl1
evdev                  10240  3 
dm_mirror              21908  0 
dm_snapshot            17448  0 
dm_mod                 54988  29 dm_mirror,dm_snapshot
usbhid                 24544  0 
hid                    24704  1 usbhid
sd_mod                 20992  3 
ata_piix               14596  2 
generic                 5764  0 [permanent]
ide_core              120520  33 via82cxxx,trm290,triflex,tc86c001,slc90e66,sis5513,siimage,serverworks,sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,opti621,ns87415,jmicron,it821x,it8213,hpt366,hpt34x,cy82c693,cs5535,cs5530,cs5520,cmd64x,atiixp,amd74xx,alim15x3,aec62xx,ide_generic,ide_disk,ide_cd,generic
ehci_hcd               31884  0 
uhci_hcd               23568  0 
thermal                15112  0 
processor              27080  1 thermal
fan                     5892  0

et voici un ls -la /dev

drwxr-xr-x 16 root root        3600 2007-08-29 08:55 .
drwxr-xr-x 23 root root        4096 2007-08-29 05:01 ..
crw-rw----  1 root audio    14,  12 2007-08-29 08:55 adsp
crw-rw----  1 root audio    14,   4 2007-08-29 08:55 audio
drwxr-xr-x  3 root root          60 2007-08-29 08:55 bus
crw-------  1 root root      5,   1 2007-08-29 08:55 console
lrwxrwxrwx  1 root root          11 2007-08-29 08:55 core -> /proc/kcore
drwxr-xr-x  5 root root         100 2007-08-29 08:55 disk
brw-rw----  1 root disk    253,   0 2007-08-29 08:55 dm-0
brw-rw----  1 root disk    253,   1 2007-08-29 08:55 dm-1
brw-rw----  1 root disk    253,  10 2007-08-29 08:55 dm-10
brw-rw----  1 root disk    253,  11 2007-08-29 08:55 dm-11
brw-rw----  1 root disk    253,  12 2007-08-29 08:55 dm-12
brw-rw----  1 root disk    253,   2 2007-08-29 08:55 dm-2
brw-rw----  1 root disk    253,   3 2007-08-29 08:55 dm-3
brw-rw----  1 root disk    253,   4 2007-08-29 08:55 dm-4
brw-rw----  1 root disk    253,   5 2007-08-29 08:55 dm-5
brw-rw----  1 root disk    253,   6 2007-08-29 08:55 dm-6
brw-rw----  1 root disk    253,   7 2007-08-29 08:55 dm-7
brw-rw----  1 root disk    253,   8 2007-08-29 08:55 dm-8
brw-rw----  1 root disk    253,   9 2007-08-29 08:55 dm-9
crw-rw----  1 root audio    14,   3 2007-08-29 08:55 dsp
lrwxrwxrwx  1 root root          13 2007-08-29 08:55 fd -> /proc/self/fd
crw-rw-rw-  1 root root      1,   7 2007-08-29 08:55 full
crw-rw----  1 root root     10, 228 2007-08-29 08:55 hpet
prw-------  1 root root           0 2007-08-29 08:55 initctl
drwxr-xr-x  2 root root          60 2007-08-29 08:55 .initramfs
-rw-r--r--  1 root root           0 2007-08-29 08:55 .initramfs-tools
drwxr-xr-x  4 root root         240 2007-08-29 08:55 input
crw-r-----  1 root kmem      1,   2 2007-08-29 08:55 kmem
crw-rw----  1 root root      1,  11 2007-08-29 08:55 kmsg
srw-rw-rw-  1 root root           0 2007-08-29 08:55 log
drwxr-xr-x  2 root root          60 2007-08-29 08:55 loop
brw-rw----  1 root disk      7,   0 2007-08-29 08:55 loop0
brw-rw----  1 root disk      7,   1 2007-08-29 08:55 loop1
brw-rw----  1 root disk      7,   2 2007-08-29 08:55 loop2
brw-rw----  1 root disk      7,   3 2007-08-29 08:55 loop3
brw-rw----  1 root disk      7,   4 2007-08-29 08:55 loop4
brw-rw----  1 root disk      7,   5 2007-08-29 08:55 loop5
brw-rw----  1 root disk      7,   6 2007-08-29 08:55 loop6
brw-rw----  1 root disk      7,   7 2007-08-29 08:55 loop7
drwx------  2 root root         300 2007-08-29 08:55 lvmch
lrwxrwxrwx  1 root root          13 2007-08-29 08:55 MAKEDEV -> /sbin/MAKEDEV
drwxr-xr-x  2 root root         320 2007-08-29 08:55 mapper
crw-r-----  1 root kmem      1,   1 2007-08-29 08:55 mem
crw-rw----  1 root audio    14,   0 2007-08-29 08:55 mixer
drwxr-xr-x  2 root root          60 2007-08-29 08:55 net
crw-rw-rw-  1 root root      1,   3 2007-08-29 08:55 null
crw-rw-rw-  1 root root    195,   0 2007-08-29 08:55 nvidia0
crw-rw-rw-  1 root root    195, 255 2007-08-29 08:55 nvidiactl
drwxr-xr-x  2 root root          60 2007-08-29 08:55 pktcdvd
crw-r-----  1 root kmem      1,   4 2007-08-29 08:55 port
crw-------  1 root root    108,   0 2007-08-29 08:55 ppp
crw-rw----  1 root root     10,   1 2007-08-29 08:55 psaux
crw-rw-rw-  1 root root      5,   2 2007-08-29 09:06 ptmx
drwxr-xr-x  2 root root           0 2007-08-29 08:55 pts
crw-rw-rw-  1 root root      1,   8 2007-08-29 08:55 random
crw-rw----  1 root audio    10, 135 2007-08-29 08:55 rtc
brw-rw----  1 root disk      8,   0 2007-08-29 08:55 sda
brw-rw----  1 root disk      8,   1 2007-08-29 08:55 sda1
brw-rw----  1 root disk      8,   2 2007-08-29 08:55 sda2
drwxrwxrwt  2 root root          40 2007-08-29 08:55 shm
drwxr-xr-x  2 root root         160 2007-08-29 08:55 snd
lrwxrwxrwx  1 root root          24 2007-08-29 08:55 sndstat -> /proc/asound/oss/sndstat
drwx------  3 root root          60 2007-08-29 08:55 .static
lrwxrwxrwx  1 root root          15 2007-08-29 08:55 stderr -> /proc/self/fd/2
lrwxrwxrwx  1 root root          15 2007-08-29 08:55 stdin -> /proc/self/fd/0
lrwxrwxrwx  1 root root          15 2007-08-29 08:55 stdout -> /proc/self/fd/1
crw-rw-rw-  1 root root      5,   0 2007-08-29 08:55 tty
crw-rw----  1 root root      4,   0 2007-08-29 08:55 tty0
crw-------  1 root root      4,   1 2007-08-29 08:55 tty1
crw-rw----  1 root root      4,  10 2007-08-29 08:55 tty10
crw-rw----  1 root root      4,  11 2007-08-29 08:55 tty11
crw-rw----  1 root root      4,  12 2007-08-29 08:55 tty12
crw-rw----  1 root root      4,  13 2007-08-29 08:55 tty13
crw-rw----  1 root root      4,  14 2007-08-29 08:55 tty14
crw-rw----  1 root root      4,  15 2007-08-29 08:55 tty15
crw-rw----  1 root root      4,  16 2007-08-29 08:55 tty16
crw-rw----  1 root root      4,  17 2007-08-29 08:55 tty17
crw-rw----  1 root root      4,  18 2007-08-29 08:55 tty18
crw-rw----  1 root root      4,  19 2007-08-29 08:55 tty19
crw-------  1 root root      4,   2 2007-08-29 08:55 tty2
crw-rw----  1 root root      4,  20 2007-08-29 08:55 tty20
crw-rw----  1 root root      4,  21 2007-08-29 08:55 tty21
crw-rw----  1 root root      4,  22 2007-08-29 08:55 tty22
crw-rw----  1 root root      4,  23 2007-08-29 08:55 tty23
crw-rw----  1 root root      4,  24 2007-08-29 08:55 tty24
crw-rw----  1 root root      4,  25 2007-08-29 08:55 tty25
crw-rw----  1 root root      4,  26 2007-08-29 08:55 tty26
crw-rw----  1 root root      4,  27 2007-08-29 08:55 tty27
crw-rw----  1 root root      4,  28 2007-08-29 08:55 tty28
crw-rw----  1 root root      4,  29 2007-08-29 08:55 tty29
crw-------  1 root root      4,   3 2007-08-29 08:55 tty3
crw-rw----  1 root root      4,  30 2007-08-29 08:55 tty30
crw-rw----  1 root root      4,  31 2007-08-29 08:55 tty31
crw-rw----  1 root root      4,  32 2007-08-29 08:55 tty32
crw-rw----  1 root root      4,  33 2007-08-29 08:55 tty33
crw-rw----  1 root root      4,  34 2007-08-29 08:55 tty34
crw-rw----  1 root root      4,  35 2007-08-29 08:55 tty35
crw-rw----  1 root root      4,  36 2007-08-29 08:55 tty36
crw-rw----  1 root root      4,  37 2007-08-29 08:55 tty37
crw-rw----  1 root root      4,  38 2007-08-29 08:55 tty38
crw-rw----  1 root root      4,  39 2007-08-29 08:55 tty39
crw-------  1 root root      4,   4 2007-08-29 08:55 tty4
crw-rw----  1 root root      4,  40 2007-08-29 08:55 tty40
crw-rw----  1 root root      4,  41 2007-08-29 08:55 tty41
crw-rw----  1 root root      4,  42 2007-08-29 08:55 tty42
crw-rw----  1 root root      4,  43 2007-08-29 08:55 tty43
crw-rw----  1 root root      4,  44 2007-08-29 08:55 tty44
crw-rw----  1 root root      4,  45 2007-08-29 08:55 tty45
crw-rw----  1 root root      4,  46 2007-08-29 08:55 tty46
crw-rw----  1 root root      4,  47 2007-08-29 08:55 tty47
crw-rw----  1 root root      4,  48 2007-08-29 08:55 tty48
crw-rw----  1 root root      4,  49 2007-08-29 08:55 tty49
crw-------  1 root root      4,   5 2007-08-29 08:55 tty5
crw-rw----  1 root root      4,  50 2007-08-29 08:55 tty50
crw-rw----  1 root root      4,  51 2007-08-29 08:55 tty51
crw-rw----  1 root root      4,  52 2007-08-29 08:55 tty52
crw-rw----  1 root root      4,  53 2007-08-29 08:55 tty53
crw-rw----  1 root root      4,  54 2007-08-29 08:55 tty54
crw-rw----  1 root root      4,  55 2007-08-29 08:55 tty55
crw-rw----  1 root root      4,  56 2007-08-29 08:55 tty56
crw-rw----  1 root root      4,  57 2007-08-29 08:55 tty57
crw-rw----  1 root root      4,  58 2007-08-29 08:55 tty58
crw-rw----  1 root root      4,  59 2007-08-29 08:55 tty59
crw-------  1 root root      4,   6 2007-08-29 08:55 tty6
crw-rw----  1 root root      4,  60 2007-08-29 08:55 tty60
crw-rw----  1 root root      4,  61 2007-08-29 08:55 tty61
crw-rw----  1 root root      4,  62 2007-08-29 08:55 tty62
crw-rw----  1 root root      4,  63 2007-08-29 08:55 tty63
crw-rw----  1 root root      4,   7 2007-08-29 08:55 tty7
crw-rw----  1 root root      4,   8 2007-08-29 08:55 tty8
crw-rw----  1 root root      4,   9 2007-08-29 08:55 tty9
crw-rw----  1 root dialout   4,  64 2007-08-29 08:55 ttyS0
crw-rw----  1 root dialout   4,  65 2007-08-29 08:55 ttyS1
crw-rw----  1 root dialout   4,  66 2007-08-29 08:55 ttyS2
crw-rw----  1 root dialout   4,  67 2007-08-29 08:55 ttyS3
drwxr-xr-x  6 root root         140 2007-08-29 08:55 .udev
crw-rw-rw-  1 root root      1,   9 2007-08-29 08:55 urandom
crw-rw----  1 root root    253,   0 2007-08-29 08:55 usbdev1.1_ep00
crw-rw----  1 root root    253,   1 2007-08-29 08:55 usbdev1.1_ep81
crw-rw----  1 root root    253,   2 2007-08-29 08:55 usbdev2.1_ep00
crw-rw----  1 root root    253,   3 2007-08-29 08:55 usbdev2.1_ep81
crw-rw----  1 root root    253,   4 2007-08-29 08:55 usbdev3.1_ep00
crw-rw----  1 root root    253,   5 2007-08-29 08:55 usbdev3.1_ep81
crw-rw----  1 root root    253,   6 2007-08-29 08:55 usbdev4.1_ep00
crw-rw----  1 root root    253,   7 2007-08-29 08:55 usbdev4.1_ep81
crw-rw----  1 root root    253,   8 2007-08-29 08:55 usbdev5.1_ep00
crw-rw----  1 root root    253,  10 2007-08-29 08:55 usbdev5.1_ep81
crw-rw----  1 root root    253,  11 2007-08-29 08:55 usbdev6.1_ep00
crw-rw----  1 root root    253,  13 2007-08-29 08:55 usbdev6.1_ep81
crw-rw----  1 root root    253,  14 2007-08-29 08:55 usbdev7.1_ep00
crw-rw----  1 root root    253,  15 2007-08-29 08:55 usbdev7.1_ep81
crw-rw----  1 root root    253,  18 2007-08-29 08:55 usbdev7.2_ep00
crw-rw----  1 root root    253,  19 2007-08-29 08:55 usbdev7.2_ep81
crw-rw----  1 root root    253,   9 2007-08-29 08:55 usbdev7.3_ep00
crw-rw----  1 root root    253,  12 2007-08-29 08:55 usbdev7.3_ep81
crw-rw----  1 root root    253,  20 2007-08-29 08:55 usbdev7.4_ep00
crw-rw----  1 root root    253,  21 2007-08-29 08:55 usbdev7.4_ep81
crw-rw----  1 root root    253,  22 2007-08-29 08:55 usbdev7.4_ep82
crw-rw----  1 root root    253,  16 2007-08-29 08:55 usbdev8.1_ep00
crw-rw----  1 root root    253,  17 2007-08-29 08:55 usbdev8.1_ep81
crw-rw----  1 root root      7,   0 2007-08-29 08:55 vcs
crw-rw----  1 root root      7,   1 2007-08-29 08:55 vcs1
crw-rw----  1 root root      7,   2 2007-08-29 08:55 vcs2
crw-rw----  1 root root      7,   3 2007-08-29 08:55 vcs3
crw-rw----  1 root root      7,   4 2007-08-29 08:55 vcs4
crw-rw----  1 root root      7,   5 2007-08-29 08:55 vcs5
crw-rw----  1 root root      7,   6 2007-08-29 08:55 vcs6
crw-rw----  1 root root      7,   7 2007-08-29 08:55 vcs7
crw-rw----  1 root root      7, 128 2007-08-29 08:55 vcsa
crw-rw----  1 root root      7, 129 2007-08-29 08:55 vcsa1
crw-rw----  1 root root      7, 130 2007-08-29 08:55 vcsa2
crw-rw----  1 root root      7, 131 2007-08-29 08:55 vcsa3
crw-rw----  1 root root      7, 132 2007-08-29 08:55 vcsa4
crw-rw----  1 root root      7, 133 2007-08-29 08:55 vcsa5
crw-rw----  1 root root      7, 134 2007-08-29 08:55 vcsa6
crw-rw----  1 root root      7, 135 2007-08-29 08:55 vcsa7
prw-r-----  1 root adm            0 2007-08-29 09:06 xconsole
crw-rw-rw-  1 root root      1,   5 2007-08-29 08:55 zero

un lspci si sa peux servire:

00:00.0 Host bridge: Intel Corporation Unknown device 29c0 (rev 02)
00:01.0 PCI bridge: Intel Corporation Unknown device 29c1 (rev 02)
00:1a.0 USB Controller: Intel Corporation Unknown device 2937 (rev 02)
00:1a.1 USB Controller: Intel Corporation Unknown device 2938 (rev 02)
00:1a.2 USB Controller: Intel Corporation Unknown device 2939 (rev 02)
00:1a.7 USB Controller: Intel Corporation Unknown device 293c (rev 02)
00:1b.0 Audio device: Intel Corporation Unknown device 293e (rev 02)
00:1c.0 PCI bridge: Intel Corporation Unknown device 2940 (rev 02)
00:1c.4 PCI bridge: Intel Corporation Unknown device 2948 (rev 02)
00:1c.5 PCI bridge: Intel Corporation Unknown device 294a (rev 02)
00:1d.0 USB Controller: Intel Corporation Unknown device 2934 (rev 02)
00:1d.1 USB Controller: Intel Corporation Unknown device 2935 (rev 02)
00:1d.2 USB Controller: Intel Corporation Unknown device 2936 (rev 02)
00:1d.7 USB Controller: Intel Corporation Unknown device 293a (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation Unknown device 2918 (rev 02)
00:1f.2 IDE interface: Intel Corporation Unknown device 2921 (rev 02)
00:1f.3 SMBus: Intel Corporation Unknown device 2930 (rev 02)
00:1f.5 IDE interface: Intel Corporation Unknown device 2926 (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0191 (rev a2)
02:00.0 Ethernet controller: Unknown device 1969:1048 (rev b0)
03:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6121 (rev b1)

toutes les commande on été passée en root.
et quand j'essaye de monter le cdrom avec gnome
mount: special device /dev/hdd does not exist

voila si quelqu'un a une idée je suis preneur

net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Wednesday 29 August 2007 07:13:24
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: panthere noire

j'ai oublier de préciser le modèle le model est un plextore px 716A

net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Wednesday 29 August 2007 09:43:26
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: nicola

La réponse est là :
Citation
panthere noire
mount: special device /dev/hdd does not

Et là :
Citation

crw-rw-rw- 1 root root 1, 7 2007-08-29 08:55 full
crw-rw---- 1 root root 10, 228 2007-08-29 08:55 hpet

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Wednesday 29 August 2007 11:53:30
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: panthere noire


heu. ?
man mount
mch:/home/tnt# mount -t iso9660,udf /dev/hpet /home/tnt/Desktop/cd
mount: /dev/hpet is not a block device
mch:/home/tnt# mount -t iso9660 /dev/hpet /home/tnt/Desktop/cd
mount: /dev/hpet is not a block device
mch:/home/tnt# mount -t iso9660 /dev/full /home/tnt/Desktop/cd
mount: /dev/full is not a block device
mch:/home/tnt# mount -t iso9660,udf /dev/full /home/tnt/Desktop/cd
mount: /dev/full is not a block device



net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Wednesday 29 August 2007 13:28:25
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: nicola

Hum hum hum. ^^D-*
Tu vois /dev/hdd quelque part ?

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Wednesday 29 August 2007 13:51:42
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: diancech

dmesg

Puis tu regardes si la device à laquelle est associé ton lecteur n'as pas changée.



--------------------------------------------------------------------------------------------------------------------------------------------------
Exige beaucoup de toi-même et attends peu des autres. Ainsi beaucoup d'ennuis te seront épargnés. Confucius

Poste le Wednesday 29 August 2007 13:51:54
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: panthere noire

nicola, mai j'avais deviner pourquoi , je pensais que tu proposait la solution.... :-/


diancech

ben je fait un resumer les seul lignes qui me parle c'est:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ide1: I/O resource 0x376-0x376 not free.
ide1: ports already in use, skipping probe


je donne le dmsg aux complet aux ca ou:

(c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
pnp: 00:06: ioport range 0x290-0x297 has been reserved
pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
Time: tsc clocksource has been installed.
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: d000-dfff
  MEM window: fa000000-fe9fffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: f8f00000-f8ffffff
PCI: Bridge: 0000:00:1c.4
  IO window: e000-efff
  MEM window: feb00000-febfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: disabled.
  MEM window: fea00000-feafffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5 -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 4784k freed
audit: initializing netlink socket (disabled)
audit(1188392154.617:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usbcore: registered new interface driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new interface driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
PNP: PS/2 Controller [PNP0303tongue sticking out smileyS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 220k freed
ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] -  B2, should be B1 [20070126]
ACPI: SSDT 7FF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
ACPI: SSDT 7FF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000c880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000cc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c080
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000c480
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: connect-debounce failed, port 3 disabled
hub 1-1:1.0: cannot disable port 3 (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
ata_piix 0000:00:1f.2: version 2.10ac1
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff90 irq 14
ata2: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff98 irq 15
scsi0 : ata_piix
usb 7-1: new high speed USB device using ehci_hcd and address 2
ATA: abnormal status 0x7F on port 0x000101f7
scsi1 : ata_piix
usb 7-1: configuration #1 chosen from 1 choice
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
usb 1-1: USB disconnect, address 2
ATA: abnormal status 0x7F on port 0x00010177
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ata3: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b480 irq 22
ata4: SATA max UDMA/133 cmd 0x0001b880 ctl 0x0001b802 bmdma 0x0001b488 irq 22
scsi2 : ata_piix
ATA: abnormal status 0x7F on port 0x0001c007
scsi3 : ata_piix
usb 7-1.3: new low speed USB device using ehci_hcd and address 3
ata4.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72503 V54O PQ: 0 ANSI: 5
SCSI device sda: 625142448 512-byte hdwr sectors (320073 Mcool smiley
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 625142448 512-byte hdwr sectors (320073 Mcool smiley
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 3:0:0:0: Attached scsi disk sda
usb 7-1.3: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
usb 7-1.4: new low speed USB device using ehci_hcd and address 4
usb 7-1.4: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input1
input: Logitech USB Receiver as /class/input/input2
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Attansic L1 Ethernet Network Driver - version 2.0.7
Copyright(c) 2005-2006 Attansic Corporation.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
Real Time Clock Driver v1.12ac
udev: renamed network interface eth0 to eth1
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
EXT3 FS on sda1, internal journal
loop: loaded (max 8 devices)
drivers/usb/serial/usb-serial.c: USB Serial support registered for debug
usbcore: registered new interface driver debug
ide1: I/O resource 0x376-0x376 not free.
ide1: ports already in use, skipping probe
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-12, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 511992k swap on /dev/mapper/lvmch-swap.  Priority:-1 extents:1 across:511992k
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
atl1 0000:02:00.0: Unable to enable MSI: -1
atl1: eth1 link is up 100 Mbps full duplex
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
Linux agpgart interface v0.102 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth1: no IPv6 routers present

net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Wednesday 29 August 2007 14:37:03
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: nicola

Pour créer le périphérique manquant, tu as à ta disposition MAKEDEV.

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Wednesday 29 August 2007 18:11:52
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: panthere noire

nicola tu peux être plus explicite la parce que : MAKEDEV est un script qui crée les fichiers périphériques statiques nécessaires, qui se trouvent généralement dans le répertoire /dev.
Cepandant la dans /dev il y a rien il n'y a que le sda sda1 et sda2 qui son en rapport avec le disque stata 2, et graveur lui est en ide.

net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Wednesday 29 August 2007 18:47:57
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: nicola

Grmbl.
Lequel te manque-t-il ?

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Wednesday 29 August 2007 18:57:54
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: diancech

C'est bizarre j'ai l'impression qu'il n'est pas du tout détecté par le module "ata", chez moi j'ai ça par exemple:

ata7.00: ATAPI: PIONEER DVD-RW  DVR-112, 1.15, max UDMA/66
ata7.00: configured for UDMA/66
scsi 6:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-112  1.15 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg1 type 5

Qui me donne la device sr0.

A mon avis tu as un soucis avec la kernel, ton lecteur n'est pas détecté par le module "ata", tu devrais essayer en utilisant le module "ide_generic".

;-)


--------------------------------------------------------------------------------------------------------------------------------------------------
Exige beaucoup de toi-même et attends peu des autres. Ainsi beaucoup d'ennuis te seront épargnés. Confucius

Poste le Wednesday 29 August 2007 20:21:38
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: panthere noire

justement j'ai essaye ceci:

Qui ma été proposer poiuy sur un autres forum.

ide1: I/O resource 0x376-0x376 not free.
ide1: ports already in use, skipping probe

Ce problème pourrait venir, par exemple, du fait que le module ata_piix est "lancé" avant le module ide_generic. Si tel est le problème, d'aucuns l'ont réglé de cette manière:

Bug with ata_piix module prevent loading ide driver. You have to rebuild initrd image. Just add following to /etc/mkinitrd/modules:
ide-generic
ata_piix
sd_mod

Backup your old initrd:
cp /boot/initrd.img.2.6.8-1-686 /boot/initrd.img.2.6.8-1-686.bak

Make new initrd image:
mkinitrd -o /boot/initrd.img.2.6.8-1-686

Reboot
In case of failure boot from old image - grub way:
initrd /boot/initrd.img.2.6.8-1-686.bak

j'ai fait un rapport de bug en signalant que le lecteur n'est pas détecter !

net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Thursday 30 August 2007 07:20:58
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: panthere noire

bon j'ai refiler mon graveur et je m'en suis pris un en sata smiling smiley
Donc le problème est pas résolut car en fait c'est le controleur ide qui n'est pas supporter. malgré les tentive avec des noyaux plus recent 2.6.22 et le driver proposer par le constructeur qui me plente un kernel panic il n'y a rien a faire.

net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Saturday 1 September 2007 09:52:48
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: ankou29666

j'avais exactement le même problème, je pouvais booter sur cd mais pas utiliser le lecteur une fois linux booté, je vois que tu es comme moi sur un noyau custom :

n'as tu tout simplement pas désactivé une option quelconque concernant le CDrom ou le bus IDE dans la configuration du noyau ???

Poste le Sunday 2 September 2007 23:33:43
Répondre     Citer    
Re: plus de cd-rom !
Envoyé par: panthere noire

non car si c'est en live cd . dans le but d'installer un système neuf,car je voudrai installer une etch et une lenny séparément. il n'y que le noyaux du live cd.
bon la j'ai un graveur qui est pris en compte par ma ditib actuel (en sata donc un neuf), mai toutjours le même problème le cd d'install marche pas . je vais donc essayer de me fabriquer mon propre cd avec une net install dessus.
Le script pour plus d'info [home.tele2.fr]

mai j'ai quelque souci avec avec sa plante


mch:/home/tnt# mount -t ext3 /dev/ram0 /media/ram
mount: wrong fs type, bad option, bad superblock on /dev/ram0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

mch:/home/tnt# ls /dev | grep ram0
ram0

même résulta en ext2
dmesg :
VFS: Can't find ext3 filesystem on dev ram0.


ls /dev
adsp     initctl    ram0     tty    tty34  tty60           usbdev7.3_ep81
audio    input      ram1     tty0   tty35  tty61           usbdev7.4_ep00
bus      kmem       ram10    tty1   tty36  tty62           usbdev7.4_ep81
cdrom2   kmsg       ram11    tty10  tty37  tty63           usbdev7.4_ep82
cdrw2    log        ram12    tty11  tty38  tty7            usbdev8.1_ep00
console  loop       ram13    tty12  tty39  tty8            usbdev8.1_ep81
core     loop0      ram14    tty13  tty4   tty9            vcs
cpu      loop1      ram15    tty14  tty40  ttyS0           vcs1
disk     loop2      ram2     tty15  tty41  ttyS1           vcs2
dm-0     loop3      ram3     tty16  tty42  ttyS2           vcs3
dm-1     loop4      ram4     tty17  tty43  ttyS3           vcs4
dm-10    loop5      ram5     tty18  tty44  urandom         vcs5
dm-11    loop6      ram6     tty19  tty45  usbdev1.1_ep00  vcs6
dm-12    loop7      ram7     tty2   tty46  usbdev1.1_ep81  vcs7
dm-13    lvmch      ram8     tty20  tty47  usbdev2.1_ep00  vcsa
dm-2     MAKEDEV    ram9     tty21  tty48  usbdev2.1_ep81  vcsa1
dm-3     mapper     random   tty22  tty49  usbdev3.1_ep00  vcsa2
dm-4     mem        rtc      tty23  tty5   usbdev3.1_ep81  vcsa3
dm-5     mixer      scd0     tty24  tty50  usbdev4.1_ep00  vcsa4
dm-6     net        sda      tty25  tty51  usbdev4.1_ep81  vcsa5
dm-7     null       sda1     tty26  tty52  usbdev5.1_ep00  vcsa6
dm-8     nvidia0    sda2     tty27  tty53  usbdev5.1_ep81  vcsa7
dm-9     nvidiactl  shm      tty28  tty54  usbdev6.1_ep00  xconsole
dsp      pktcdvd    snd      tty29  tty55  usbdev6.1_ep81  zero
dvd2     port       sndstat  tty3   tty56  usbdev7.1_ep00
dvdrw2   ppp        sr0      tty30  tty57  usbdev7.1_ep81
fd       psaux      stderr   tty31  tty58  usbdev7.2_ep00
full     ptmx       stdin    tty32  tty59  usbdev7.2_ep81
hpet     pts        stdout   tty33  tty6   usbdev7.3_ep00

net install--> sid2.6.32 dist i386
fluxbox
nvidia 8800gtx 768 ddr3

Poste le Monday 3 September 2007 00:08:04
Répondre     Citer    

Veuillez vous authentifier auparavant pour commenter.

 

Ce forum !
plus de cd-rom !
Vous voulez savoir si votre matériel est supporté par Linux, ou vous avez un problème pour installer un module ? Ce forum est pour vous !

Sauf mention contraire, les documentations publiées sont sous licence Creative-Commons