Léa-Linux & amis :   LinuxFR   GCU-Squad   GNU
WIFI D-LINK DWL G510 C2 config reseau
Envoyé par: Cyrille

Bonjour,
j'ai acheté une carte D-LINK DWL G510 PCI rev C2

J'ai installé :
m-a a-i rt2x00-source

et les firmware là /lib/firmware
(http://www.ralinktech.com.tw/data/RT61_Firmware_V1.2.zip)

J'ai une livebox sagem


Le probleme c'est que je n'arrive pas à me connecter au réseau (alors qu'en etherent pas de pb)
J'ai cherché sur le web, mais rien de concluant....


Ci-dessus des sorties , je pense que le wmaster0 est mal configuré, peut etre sans doute aussi le fichier interface....

Si quelqu'un un a des solutions, elles sont plus que les bienvenues. Merci

Cyrille

cat /etc/debian_version
4.0
---> ETCH

uname -a
Linux  2.6.18-6-486 #1 Wed Jan 23 02:46:42 UTC 2008 i686 GNU/Linux

~$ lspci
*****
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:0b.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
******


$ lsmod | grep rt61
rt61pci                34180  0
80211                 139144  2 rate_control,rt61pci
firmware_class          9472  1 rt61pci
crc_itu_t               2304  1 rt61pci



$ ls /lib/firmware/
LICENSE.ralink-firmware.txt  rt2561.bin  rt2561s.bin  rt2661.bin

cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface



pre-up ifconfig wlan0 up
pre-up iwconfig wlan0 essid "Livebox-cd19"
pre-up iwconfig wlan0 mode Managed
pre-up iwpriv wlan0 set Channel 10

pre-up iwconfig wlan0 essid "Livebox-cd19"

pre-up iwpriv wlan0 set AuthMode=WEPAUTO
pre-up iwpriv wlan0 set EncrypType=WEP
pre-up iwpriv wlan0 set Key1="XXXXXXXX"
pre-up iwpriv wlan0 set SSID="Livebox-cd19"

auto wlan0
iface wlan0 inet dhcp
wireless-mode Managed
wireless-essid Livebox-cd19
wireless-key XXXXXXXX



$ dmesg | grep rt61
Loading module: rt61pci - CVS (N/A) by [rt2x00.serialmonkey.com].


#  /etc/init.d/networking restart
Reconfiguring network interfaces...Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit [www.isc.org]

wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:19:5b:78:c9:7f
Sending on   LPF/wlan0/00:19:5b:78:c9:7f
Sending on   Socket/fallback
Error for wireless request "Set Mode" (8B06) :
    SET failed on device wlan0 ; Invalid argument.
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit [www.isc.org]

wmaster0: unknown hardware address type 801
SIOCSIFFLAGS: Input/output error
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:19:5b:78:c9:7f
Sending on   LPF/wlan0/00:19:5b:78:c9:7f
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7


ifconfig
eth1      Lien encap:Ethernet  HWaddr 00:08:54:09:75:A0
          inet adr:192.168.1.11  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::208:54ff:fe09:75a0/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1841 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1671 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:2109218 (2.0 Micool smiley  TX bytes:287800 (281.0 Kicool smiley
          Interruption:10 Adresse de base:0xac00

wlan0     Lien encap:Ethernet  HWaddr 00:19:5B:78:C9:7F
          adr inet6: fe80::219:5bff:fe78:c97f/64 Scope:Lien
          UP RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:0 (0.0 b)  TX bytes:3312 (3.2 Kicool smiley
          Adresse de base:0x9000

wmaster0  Lien encap:UNSPEC  HWaddr 00-19-5B-78-C9-7F-30-3A-00-00-00-00-00-00-00-00
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Adresse de base:0x9000




iwconfig
lo        no wireless extensions.

eth1      no wireless extensions.

wmaster0  IEEE 802.11g  Frequency:2.412 GHz
          RTS thryawning smileyff   Fragment thr=2346 B

wlan0     IEEE 802.11g  ESSID:"Livebox-cd19"
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated
          RTS thryawning smileyff   Fragment thr=2346 B
          Encryption keyangry smileyXXXXXXXXXXXXXXXXXXXXXXXXXX

sit0      no wireless extensions.

----------------
LAPTOP DEBIAN Lenny. Amd64. (Gnome) | Dell Inspiron 1525n
LAPTOP DEBIAN Etch. Amd64. (Xfce / Gnome) | Toshiba A20
DESKTOP DEBIAN Lenny.

Poste le Saturday 2 February 2008 13:47:37
Répondre     Citer    
Re: WIFI D-LINK DWL G510 C2 config reseau
Envoyé par: Cyrille

Bon resolu
Je suis passé sous LENNY et là pas de probleme
Je ne sais pas pourquoi ça ne passait pas avant mais là ça marche...
Cyrille

----------------
LAPTOP DEBIAN Lenny. Amd64. (Gnome) | Dell Inspiron 1525n
LAPTOP DEBIAN Etch. Amd64. (Xfce / Gnome) | Toshiba A20
DESKTOP DEBIAN Lenny.

Poste le Sunday 3 February 2008 17:41:07
Répondre     Citer    

Veuillez vous authentifier auparavant pour commenter.

 

Ce forum !
WIFI D-LINK DWL G510 C2 config reseau
Aide sur les distributions Debian, Ubuntu et leurs dérivées : Mepis, Mint, Knoppix, Kubuntu, Lubuntu, Xandros

Sauf mention contraire, les documentations publiées sont sous licence Creative-Commons