Poste le résultat des deux commandes suivantes:

lshw -class multimedia

et

lsmod

cela permettra déja de voir si ce sont les drivers appropriés que ton système essaye d'utiliser.

Poste le Monday 16 January 2006 16:53:28

voila le résultat des eux commandes:
debianSarge:/home/thom# lsmod
Module Size Used by
nls_iso8859_1 4032 1
vfat 14656 1
fat 46784 1 vfat
nls_cp437 5696 1
isofs 37272 0
usb_storage 69056 0
ipv6 264772 8
ds 18756 4
irtty_sir 9152 0
sir_dev 19244 1 irtty_sir
irda 197120 2 irtty_sir,sir_dev
crc_ccitt 2144 1 irda
analog 11968 0
ns558 5696 0
parport_pc 36900 0
parport 41800 1 parport_pc
floppy 61200 1
pcspkr 3592 0
rtc 12760 0
snd_cs46xx 91976 0
snd_rawmidi 25124 1 snd_cs46xx
snd_seq_device 8200 1 snd_rawmidi
snd_ac97_codec 69988 1 snd_cs46xx
snd_pcm_oss 55080 0
snd_mixer_oss 20096 1 snd_pcm_oss
snd_pcm 98728 2 snd_cs46xx,snd_pcm_oss
snd_timer 25732 1 snd_pcm
snd 57156 8 snd_cs46xx,snd_rawmidi,snd_seq_device,snd_ac97_c odec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10272 1 snd
snd_page_alloc 11752 2 snd_cs46xx,snd_pcm
gameport 4704 3 analog,ns558,snd_cs46xx
pci_hotplug 34640 0
intel_agp 22816 1
uhci_hcd 33136 0
usbcore 118980 4 usb_storage,uhci_hcd
yenta_socket 21728 0
pcmcia_core 70868 2 ds,yenta_socket
agpgart 34664 1 intel_agp
tsdev 7392 0
mousedev 10476 2
evdev 9600 0
capability 4520 0
commoncap 7232 1 capability
psmouse 20360 0
ide_cd 42656 0
cdrom 40732 1 ide_cd
ext3 127240 1
jbd 62616 1 ext3
mbcache 9348 1 ext3
ide_generic 1408 0
piix 13440 1
ide_disk 19296 3
ide_core 139940 5 usb_storage,ide_cd,ide_generic,piix,ide_disk
sd_mod 21728 0
ata_piix 8132 0
libata 41700 1 ata_piix
scsi_mod 125228 3 usb_storage,sd_mod,libata
unix 28756 280
font 8320 0
vesafb 6656 0
cfbcopyarea 3872 1 vesafb
cfbimgblt 3040 1 vesafb
cfbfillrect 3776 1 vesafb
debianSarge:/home/thom#
debianSarge:/home/thom# lshw -class multimedia
*-multimedia UNCLAIMED
description: Multimedia audio controller
product: CS 4610/11 [CrystalClear SoundFusion Audio Accelerator]
vendor: Cirrus Logic
physical id: 6
bus info: pci@00:06.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master
resources: iomemory:50100000-50100fff iomemory:50000000-500fffff irq:11
debianSarge:/home/thom#

Poste le Tuesday 17 January 2006 11:31:40

Bon, le driver snd_cs46xx devrait être correct. Afin de pouvoir exécuter alsaconf, il faut déjà stopper ton système de son avec les commandes (dans une console en tant que root)

/etc/init.d/alsa-utils stop

et

/etc/init.d/alsa stop

Ensuite tu essayes à nouveau de lancer alsaconf, en espèrant que le périphérique sera liberé et que la configuration puisse s'effectuer.

Poste le Tuesday 17 January 2006 11:44:31

En tous cas, les modules sont bien chargés.

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Tuesday 17 January 2006 19:12:58

Citation
nicola
En tous cas, les modules sont bien chargés.

Oui, et apparemment ce sont même les bons. Mais si alsacof dit que le péripérique est occupé, c'est qu'il doit y avoir un problème lors du démarrage.

Eventuellement qu'on peut trouver des messages dans les logs...? Avec la commande:

grep snd /var/log/messages

Poste le Wednesday 18 January 2006 08:47:56

me revoilà,bon j'ai essayer(en root) /etc/init.d/alsa-utils stop et /etc/init.d/alsa stop et j'ai cette réponse:
"-bash:alsa:command not found"

ça a l'air d'un message habituel:-/ (disons que je suis pas forcément calé sur linux;-)) peut-être ai-je oublié de faire quelque chose?
voila sinon pour grep snd /var/log/messages, j'ai ceci:
"Jan 14 21:10:58 localhost kernel:ERROR:sndcs46xx:never read ISV3 & ISV4 AC'97"

sinon alsaconf renvoie toujours en boucle:
"cs4236+ soundcard not found or device busy" (alors qu'il me dit lui même qu'il a désactivé tout ce qui touche au son avant de configurer)...

Poste le Wednesday 18 January 2006 20:40:25

Me revoilà aussi (en mode graphique) - aprés avoir tenté quelques expériences douteuses, j'a recompilé pratiquement tout mon système aujourd'hui (eh oui, je suis sur une Gentoo...) et je surfais et mailais en mode texte - ce qui n'est pas toujours évident.

Pour ton problème, je n'ai à disposition que des machines Kubuntu, donc il se peut qu'il y ait des différences.
As tu des scripts se nommant *alsa*, *sound* ou *snd" dans ton répertoire /etc/init.d ?
Si oui, liste les moi, on verra lesquels nous servent.

Sinon, la commande

modprobe -r snd_cs46xx

pourrait eventuellement faire l'affaire, mais je crains que la réponse sera aussi que le module soit "busy"...

__________________________________________________________________

Pour écrire le français c'est comme pour administrer un ordinateur, il faut acquérir des connaissances.
Pour les autres, il existe le langage SMS et Windows!

Poste le Wednesday 18 January 2006 21:18:27

j'ai regardé, je n'ai que 'alsa' dans le répertoire
sinon modprobe -r snd_cs46xx me renvoie:
FATAL:module snd_cs46xx not found

aussi j'ai regarder dmesg et j'ai un truc bizarre:
"AC'97 read problem (ACCTL_DCV),reg=0x2"
et il me met ça une cinquantaine de fois

et puis modules.conf est vraiment long pour le son , j'ai l'impression qu'il teste un grand nombre de modules de son ( 'pre-install... etc..)

Poste le Wednesday 18 January 2006 21:49:59

S'il ne le trouve pas pour l'enlever, c'est pas grâve (-r = remove / supprimer), as tu essyé la commande sans -r?

Puis ton modules.conf... peux tu le poster? Peut être qu'on y trouvera quelque chose.



__________________________________________________________________

Pour écrire le français c'est comme pour administrer un ordinateur, il faut acquérir des connaissances.
Pour les autres, il existe le langage SMS et Windows!

Poste le Wednesday 18 January 2006 22:14:11

voila c'est un peu long:

### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias net-pf-24 pppoe

alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

# Crypto modules (see [www.kerneli.org])
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5


### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa-base
# snd module options
options snd device_mode=0660
# autoloader aliases
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1
alias sound-slot-2 snd-card-2
alias sound-slot-3 snd-card-3
alias sound-slot-4 snd-card-4
alias sound-slot-5 snd-card-5
alias sound-slot-6 snd-card-6
alias sound-slot-7 snd-card-7
above sound-slot-0 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-1 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-2 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-3 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-4 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-5 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-6 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-7 snd-pcm-oss snd-mixer-oss snd-seq-oss
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
# Load optional modules above their base modules
above snd-pcm snd-pcm-oss
above snd-mixer snd-mixer-oss
above snd-seq snd-seq-oss snd-seq-midi
# Cause a script to be run after snd-emu8000-synth module initialization
post-install snd-emu8000-synth /lib/alsa/modprobe-post-install snd-emu8000-synth
# Cause a script to be run after card driver module initialization
post-install snd-ad1816a /lib/alsa/modprobe-post-install snd-ad1816a
post-install snd-ad1848 /lib/alsa/modprobe-post-install snd-ad1848
post-install snd-ali5451 /lib/alsa/modprobe-post-install snd-ali5451
post-install snd-als100 /lib/alsa/modprobe-post-install snd-als100
post-install snd-als4000 /lib/alsa/modprobe-post-install snd-als4000
post-install snd-asihpi /lib/alsa/modprobe-post-install snd-asihpi
post-install snd-atiixp /lib/alsa/modprobe-post-install snd-atiixp
post-install snd-au8810 /lib/alsa/modprobe-post-install snd-au8810
post-install snd-au8820 /lib/alsa/modprobe-post-install snd-au8820
post-install snd-au8830 /lib/alsa/modprobe-post-install snd-au8830
post-install snd-azt2320 /lib/alsa/modprobe-post-install snd-azt2320
post-install snd-azt3328 /lib/alsa/modprobe-post-install snd-azt3328
post-install snd-azx /lib/alsa/modprobe-post-install snd-azx
post-install snd-ca0106 /lib/alsa/modprobe-post-install snd-ca0106
post-install snd-cmi8330 /lib/alsa/modprobe-post-install snd-cmi8330
post-install snd-cmipci /lib/alsa/modprobe-post-install snd-cmipci
post-install snd-cs4231 /lib/alsa/modprobe-post-install snd-cs4231
post-install snd-cs4232 /lib/alsa/modprobe-post-install snd-cs4232
post-install snd-cs4236 /lib/alsa/modprobe-post-install snd-cs4236
post-install snd-cs4281 /lib/alsa/modprobe-post-install snd-cs4281
post-install snd-cs46xx /lib/alsa/modprobe-post-install snd-cs46xx
post-install snd-darla20 /lib/alsa/modprobe-post-install snd-darla20
post-install snd-darla24 /lib/alsa/modprobe-post-install snd-darla24
post-install snd-dt019x /lib/alsa/modprobe-post-install snd-dt019x
post-install snd-emu10k1 /lib/alsa/modprobe-post-install snd-emu10k1
post-install snd-emu10k1x /lib/alsa/modprobe-post-install snd-emu10k1x
post-install snd-ens1370 /lib/alsa/modprobe-post-install snd-ens1370
post-install snd-ens1371 /lib/alsa/modprobe-post-install snd-ens1371
post-install snd-es1688 /lib/alsa/modprobe-post-install snd-es1688
post-install snd-es18xx /lib/alsa/modprobe-post-install snd-es18xx
post-install snd-es1938 /lib/alsa/modprobe-post-install snd-es1938
post-install snd-es1968 /lib/alsa/modprobe-post-install snd-es1968
post-install snd-es968 /lib/alsa/modprobe-post-install snd-es968
post-install snd-fm801 /lib/alsa/modprobe-post-install snd-fm801
post-install snd-gina20 /lib/alsa/modprobe-post-install snd-gina20
post-install snd-gina24 /lib/alsa/modprobe-post-install snd-gina24
post-install snd-gina3g /lib/alsa/modprobe-post-install snd-gina3g
post-install snd-gusclassic /lib/alsa/modprobe-post-install snd-gusclassic
post-install snd-gusextreme /lib/alsa/modprobe-post-install snd-gusextreme
post-install snd-gusmax /lib/alsa/modprobe-post-install snd-gusmax
post-install snd-harmony /lib/alsa/modprobe-post-install snd-harmony
post-install snd-hdsp /lib/alsa/modprobe-post-install snd-hdsp
post-install snd-hdspm /lib/alsa/modprobe-post-install snd-hdspm
post-install snd-ice1712 /lib/alsa/modprobe-post-install snd-ice1712
post-install snd-ice1724 /lib/alsa/modprobe-post-install snd-ice1724
post-install snd-indigo /lib/alsa/modprobe-post-install snd-indigo
post-install snd-indigodj /lib/alsa/modprobe-post-install snd-indigodj
post-install snd-indigoio /lib/alsa/modprobe-post-install snd-indigoio
post-install snd-intel8x0 /lib/alsa/modprobe-post-install snd-intel8x0
post-install snd-interwave /lib/alsa/modprobe-post-install snd-interwave
post-install snd-interwave-stb /lib/alsa/modprobe-post-install snd-interwave-stb
post-install snd-korg1212 /lib/alsa/modprobe-post-install snd-korg1212
post-install snd-layla20 /lib/alsa/modprobe-post-install snd-layla20
post-install snd-layla24 /lib/alsa/modprobe-post-install snd-layla24
post-install snd-layla3g /lib/alsa/modprobe-post-install snd-layla3g
post-install snd-maestro3 /lib/alsa/modprobe-post-install snd-maestro3
post-install snd-mia /lib/alsa/modprobe-post-install snd-mia
post-install snd-mixart /lib/alsa/modprobe-post-install snd-mixart
post-install snd-mona /lib/alsa/modprobe-post-install snd-mona
post-install snd-mpu401 /lib/alsa/modprobe-post-install snd-mpu401
post-install snd-msnd-pinnacle /lib/alsa/modprobe-post-install snd-msnd-pinnacle
post-install snd-mtpav /lib/alsa/modprobe-post-install snd-mtpav
post-install snd-nm256 /lib/alsa/modprobe-post-install snd-nm256
post-install snd-opl3sa2 /lib/alsa/modprobe-post-install snd-opl3sa2
post-install snd-opti92x-ad1848 /lib/alsa/modprobe-post-install snd-opti92x-ad1848
post-install snd-opti92x-cs4231 /lib/alsa/modprobe-post-install snd-opti92x-cs4231
post-install snd-opti93x /lib/alsa/modprobe-post-install snd-opti93x
post-install snd-pc98-cs4232 /lib/alsa/modprobe-post-install snd-pc98-cs4232
post-install snd-pcxhr /lib/alsa/modprobe-post-install snd-pcxhr
post-install snd-pdaudiocf /lib/alsa/modprobe-post-install snd-pdaudiocf
post-install snd-pdplus /lib/alsa/modprobe-post-install snd-pdplus
post-install snd-portman2x4 /lib/alsa/modprobe-post-install snd-portman2x4
post-install snd-powermac /lib/alsa/modprobe-post-install snd-powermac
post-install snd-rme32 /lib/alsa/modprobe-post-install snd-rme32
post-install snd-rme96 /lib/alsa/modprobe-post-install snd-rme96
post-install snd-rme9652 /lib/alsa/modprobe-post-install snd-rme9652
post-install snd-sa11xx-uda1341 /lib/alsa/modprobe-post-install snd-sa11xx-uda1341
post-install snd-sb16 /lib/alsa/modprobe-post-install snd-sb16
post-install snd-sb8 /lib/alsa/modprobe-post-install snd-sb8
post-install snd-sbawe /lib/alsa/modprobe-post-install snd-sbawe
post-install snd-serialmidi /lib/alsa/modprobe-post-install snd-serialmidi
post-install snd-serial-u16550 /lib/alsa/modprobe-post-install snd-serial-u16550
post-install snd-sgalaxy /lib/alsa/modprobe-post-install snd-sgalaxy
post-install snd-sonicvibes /lib/alsa/modprobe-post-install snd-sonicvibes
post-install snd-sscape /lib/alsa/modprobe-post-install snd-sscape
post-install snd-sun-amd7930 /lib/alsa/modprobe-post-install snd-sun-amd7930
post-install snd-sun-cs4231 /lib/alsa/modprobe-post-install snd-sun-cs4231
post-install snd-sun-dbri /lib/alsa/modprobe-post-install snd-sun-dbri
post-install snd-trident /lib/alsa/modprobe-post-install snd-trident
post-install snd-usb-audio /lib/alsa/modprobe-post-install snd-usb-audio
post-install snd-usb-usx2y /lib/alsa/modprobe-post-install snd-usb-usx2y
post-install snd-via82xx /lib/alsa/modprobe-post-install snd-via82xx
post-install snd-vx222 /lib/alsa/modprobe-post-install snd-vx222
post-install snd-vxp440 /lib/alsa/modprobe-post-install snd-vxp440
post-install snd-vxpocket /lib/alsa/modprobe-post-install snd-vxpocket
post-install snd-wavefront /lib/alsa/modprobe-post-install snd-wavefront
post-install snd-ymfpci /lib/alsa/modprobe-post-install snd-ymfpci
# Prevent abnormal drivers from grabbing index 0
options snd-atiixp-modem index=-2
options snd-bt87x index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2

### update-modules: end processing /etc/modutils/alsa-base

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134 apm
alias /dev/apm_bios /dev/misc/apm_bios
alias /dev/misc/apm_bios apm

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the ones that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386

Poste le Thursday 19 January 2006 11:24:20

D'après moi, ta partie son devrait avoir ceci comme contenu:

### update-modules: start processing /etc/modutils/alsa-base
# snd module options
options snd device_mode=0660
# autoloader aliases
alias snd-card-0 snd-cs46xx
alias sound-slot-0 snd-cs46xx

alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
# Load optional modules above their base modules
above snd-pcm snd-pcm-oss
above snd-mixer snd-mixer-oss
above snd-seq snd-seq-oss snd-seq-midi

# Prevent abnormal drivers from grabbing index 0

Le reste entre "### update-modules: start processing /etc/modutils/alsa-base" et "# Prevent abnormal drivers from grabbing index 0" ne te sert strictement à rien.

Puis tu redémarres ton système pour voir...

__________________________________________________________________

Pour écrire le français c'est comme pour administrer un ordinateur, il faut acquérir des connaissances.
Pour les autres, il existe le langage SMS et Windows!

Poste le Thursday 19 January 2006 11:50:58

c un peu long,je crois que modules.conf est parti un peu en live sur le son^^D-*:
### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias net-pf-24 pppoe

alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

# Crypto modules (see [www.kerneli.org])
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5


### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa-base
# snd module options
options snd device_mode=0660
# autoloader aliases
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1
alias sound-slot-2 snd-card-2
alias sound-slot-3 snd-card-3
alias sound-slot-4 snd-card-4
alias sound-slot-5 snd-card-5
alias sound-slot-6 snd-card-6
alias sound-slot-7 snd-card-7
above sound-slot-0 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-1 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-2 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-3 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-4 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-5 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-6 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-7 snd-pcm-oss snd-mixer-oss snd-seq-oss
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
# Load optional modules above their base modules
above snd-pcm snd-pcm-oss
above snd-mixer snd-mixer-oss
above snd-seq snd-seq-oss snd-seq-midi
# Cause a script to be run after snd-emu8000-synth module initialization
post-install snd-emu8000-synth /lib/alsa/modprobe-post-install snd-emu8000-synth
# Cause a script to be run after card driver module initialization
post-install snd-ad1816a /lib/alsa/modprobe-post-install snd-ad1816a
post-install snd-ad1848 /lib/alsa/modprobe-post-install snd-ad1848
post-install snd-ali5451 /lib/alsa/modprobe-post-install snd-ali5451
post-install snd-als100 /lib/alsa/modprobe-post-install snd-als100
post-install snd-als4000 /lib/alsa/modprobe-post-install snd-als4000
post-install snd-asihpi /lib/alsa/modprobe-post-install snd-asihpi
post-install snd-atiixp /lib/alsa/modprobe-post-install snd-atiixp
post-install snd-au8810 /lib/alsa/modprobe-post-install snd-au8810
post-install snd-au8820 /lib/alsa/modprobe-post-install snd-au8820
post-install snd-au8830 /lib/alsa/modprobe-post-install snd-au8830
post-install snd-azt2320 /lib/alsa/modprobe-post-install snd-azt2320
post-install snd-azt3328 /lib/alsa/modprobe-post-install snd-azt3328
post-install snd-azx /lib/alsa/modprobe-post-install snd-azx
post-install snd-ca0106 /lib/alsa/modprobe-post-install snd-ca0106
post-install snd-cmi8330 /lib/alsa/modprobe-post-install snd-cmi8330
post-install snd-cmipci /lib/alsa/modprobe-post-install snd-cmipci
post-install snd-cs4231 /lib/alsa/modprobe-post-install snd-cs4231
post-install snd-cs4232 /lib/alsa/modprobe-post-install snd-cs4232
post-install snd-cs4236 /lib/alsa/modprobe-post-install snd-cs4236
post-install snd-cs4281 /lib/alsa/modprobe-post-install snd-cs4281
post-install snd-cs46xx /lib/alsa/modprobe-post-install snd-cs46xx
post-install snd-darla20 /lib/alsa/modprobe-post-install snd-darla20
post-install snd-darla24 /lib/alsa/modprobe-post-install snd-darla24
post-install snd-dt019x /lib/alsa/modprobe-post-install snd-dt019x
post-install snd-emu10k1 /lib/alsa/modprobe-post-install snd-emu10k1
post-install snd-emu10k1x /lib/alsa/modprobe-post-install snd-emu10k1x
post-install snd-ens1370 /lib/alsa/modprobe-post-install snd-ens1370
post-install snd-ens1371 /lib/alsa/modprobe-post-install snd-ens1371
post-install snd-es1688 /lib/alsa/modprobe-post-install snd-es1688
post-install snd-es18xx /lib/alsa/modprobe-post-install snd-es18xx
post-install snd-es1938 /lib/alsa/modprobe-post-install snd-es1938
post-install snd-es1968 /lib/alsa/modprobe-post-install snd-es1968
post-install snd-es968 /lib/alsa/modprobe-post-install snd-es968
post-install snd-fm801 /lib/alsa/modprobe-post-install snd-fm801
post-install snd-gina20 /lib/alsa/modprobe-post-install snd-gina20
post-install snd-gina24 /lib/alsa/modprobe-post-install snd-gina24
post-install snd-gina3g /lib/alsa/modprobe-post-install snd-gina3g
post-install snd-gusclassic /lib/alsa/modprobe-post-install snd-gusclassic
post-install snd-gusextreme /lib/alsa/modprobe-post-install snd-gusextreme
post-install snd-gusmax /lib/alsa/modprobe-post-install snd-gusmax
post-install snd-harmony /lib/alsa/modprobe-post-install snd-harmony
post-install snd-hdsp /lib/alsa/modprobe-post-install snd-hdsp
post-install snd-hdspm /lib/alsa/modprobe-post-install snd-hdspm
post-install snd-ice1712 /lib/alsa/modprobe-post-install snd-ice1712
post-install snd-ice1724 /lib/alsa/modprobe-post-install snd-ice1724
post-install snd-indigo /lib/alsa/modprobe-post-install snd-indigo
post-install snd-indigodj /lib/alsa/modprobe-post-install snd-indigodj
post-install snd-indigoio /lib/alsa/modprobe-post-install snd-indigoio
post-install snd-intel8x0 /lib/alsa/modprobe-post-install snd-intel8x0
post-install snd-interwave /lib/alsa/modprobe-post-install snd-interwave
post-install snd-interwave-stb /lib/alsa/modprobe-post-install snd-interwave-stb
post-install snd-korg1212 /lib/alsa/modprobe-post-install snd-korg1212
post-install snd-layla20 /lib/alsa/modprobe-post-install snd-layla20
post-install snd-layla24 /lib/alsa/modprobe-post-install snd-layla24
post-install snd-layla3g /lib/alsa/modprobe-post-install snd-layla3g
post-install snd-maestro3 /lib/alsa/modprobe-post-install snd-maestro3
post-install snd-mia /lib/alsa/modprobe-post-install snd-mia
post-install snd-mixart /lib/alsa/modprobe-post-install snd-mixart
post-install snd-mona /lib/alsa/modprobe-post-install snd-mona
post-install snd-mpu401 /lib/alsa/modprobe-post-install snd-mpu401
post-install snd-msnd-pinnacle /lib/alsa/modprobe-post-install snd-msnd-pinnacle
post-install snd-mtpav /lib/alsa/modprobe-post-install snd-mtpav
post-install snd-nm256 /lib/alsa/modprobe-post-install snd-nm256
post-install snd-opl3sa2 /lib/alsa/modprobe-post-install snd-opl3sa2
post-install snd-opti92x-ad1848 /lib/alsa/modprobe-post-install snd-opti92x-ad1848
post-install snd-opti92x-cs4231 /lib/alsa/modprobe-post-install snd-opti92x-cs4231
post-install snd-opti93x /lib/alsa/modprobe-post-install snd-opti93x
post-install snd-pc98-cs4232 /lib/alsa/modprobe-post-install snd-pc98-cs4232
post-install snd-pcxhr /lib/alsa/modprobe-post-install snd-pcxhr
post-install snd-pdaudiocf /lib/alsa/modprobe-post-install snd-pdaudiocf
post-install snd-pdplus /lib/alsa/modprobe-post-install snd-pdplus
post-install snd-portman2x4 /lib/alsa/modprobe-post-install snd-portman2x4
post-install snd-powermac /lib/alsa/modprobe-post-install snd-powermac
post-install snd-rme32 /lib/alsa/modprobe-post-install snd-rme32
post-install snd-rme96 /lib/alsa/modprobe-post-install snd-rme96
post-install snd-rme9652 /lib/alsa/modprobe-post-install snd-rme9652
post-install snd-sa11xx-uda1341 /lib/alsa/modprobe-post-install snd-sa11xx-uda1341
post-install snd-sb16 /lib/alsa/modprobe-post-install snd-sb16
post-install snd-sb8 /lib/alsa/modprobe-post-install snd-sb8
post-install snd-sbawe /lib/alsa/modprobe-post-install snd-sbawe
post-install snd-serialmidi /lib/alsa/modprobe-post-install snd-serialmidi
post-install snd-serial-u16550 /lib/alsa/modprobe-post-install snd-serial-u16550
post-install snd-sgalaxy /lib/alsa/modprobe-post-install snd-sgalaxy
post-install snd-sonicvibes /lib/alsa/modprobe-post-install snd-sonicvibes
post-install snd-sscape /lib/alsa/modprobe-post-install snd-sscape
post-install snd-sun-amd7930 /lib/alsa/modprobe-post-install snd-sun-amd7930
post-install snd-sun-cs4231 /lib/alsa/modprobe-post-install snd-sun-cs4231
post-install snd-sun-dbri /lib/alsa/modprobe-post-install snd-sun-dbri
post-install snd-trident /lib/alsa/modprobe-post-install snd-trident
post-install snd-usb-audio /lib/alsa/modprobe-post-install snd-usb-audio
post-install snd-usb-usx2y /lib/alsa/modprobe-post-install snd-usb-usx2y
post-install snd-via82xx /lib/alsa/modprobe-post-install snd-via82xx
post-install snd-vx222 /lib/alsa/modprobe-post-install snd-vx222
post-install snd-vxp440 /lib/alsa/modprobe-post-install snd-vxp440
post-install snd-vxpocket /lib/alsa/modprobe-post-install snd-vxpocket
post-install snd-wavefront /lib/alsa/modprobe-post-install snd-wavefront
post-install snd-ymfpci /lib/alsa/modprobe-post-install snd-ymfpci
# Prevent abnormal drivers from grabbing index 0
options snd-atiixp-modem index=-2
options snd-bt87x index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2

### update-modules: end processing /etc/modutils/alsa-base

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134 apm
alias /dev/apm_bios /dev/misc/apm_bios
alias /dev/misc/apm_bios apm

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the ones that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386

Poste le Friday 20 January 2006 00:50:43

Il semblerait que ton modules.conf est plutôt autonome.
Mais j'ai trouvé la solution sur un forum anglais, c'est pour une Ubuntu (basé sur Debian) ça pourrait donc marcher.

En fait, sur le 600e la carte de son est identifiée de façon incorrecte, il faut donc changer ça - voici la démarche:

Ajoute ces deux lignes à ton fichier /etc/hotplug/blacklist

snd-cs46xx
cs46xx

Puis dans le fichier /etc/modprobe.d/alsa-base, tu ajoutes:

alias char-major-116 snd
alias char-major-14 soundcore
alias snd-card-0 snd-cs4236
options snd-cs4236 isapnp=0 cport=0x538 port=0x530 sb_port=0x220 fm_port=0x388 irq=5 dma1=1 dma2=0
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1

alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

options snd cards_limit=1

et finalement, dans le fichier /etc/modules tu ajoutes:

snd-cs4236

Puis tu redémarres. Lors du démarrage, entre dans le setup du bios (avec la touche [F2] je pense), et tu t'assures que l'option Fastboot n'est pas activée (disabled).

Après, ça devrait marcher!

__________________________________________________________________

Pour écrire le français c'est comme pour administrer un ordinateur, il faut acquérir des connaissances.
Pour les autres, il existe le langage SMS et Windows!

Poste le Friday 20 January 2006 15:06:13

désolé pour le retard ( j'avais pas mon thinkpad ce week et je suis e plein partiel...), alors j'ai
réédité /etc/modules.conf en enlevant tout ce qui était inutile et j'ai fait tout ce que tu m'avais dit sur le dernier message: il y a du mieux dans le sens où le serveur de son ARTS(sous KDE) se lance désormais sans problème(pas de message d'erreur), je peux lancer alsamixer( ce qui n'était pas le cas avant) etc..
Maleureusement dès que je lance de la zic (cd ou mp3) la lecture se fige sans avoir commencé....
J'ai remarqué que j'avais encore des entrées bizarres dans etc/modprobe.d/alsa-base et au démarrage(dmesg).Peut être faudrait il que je les poste??

Poste le Monday 23 January 2006 20:16:27

Oui oui, et utilise-les aussi pour une recherche sur internet.

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Monday 23 January 2006 21:52:56

voila alsa-base:
# autoloader aliases

alias char-major-116 snd
alias char-major-14 soundcore
alias snd-card-0 snd-cs4236
options snd-cs4236 isapnp=0 cport=0x538 port=0x530 sb_port=0x220 fm_port=0x388 irq=5 dma1=1 dma2=0
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1

alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

options snd cards_limit=1

install sound-slot-0 modprobe snd-card-0
install sound-slot-1 modprobe snd-card-1
install sound-slot-2 modprobe snd-card-2
install sound-slot-3 modprobe snd-card-3
install sound-slot-4 modprobe snd-card-4
install sound-slot-5 modprobe snd-card-5
install sound-slot-6 modprobe snd-card-6
install sound-slot-7 modprobe snd-card-7
# Load optional modules above their base modules
install snd-pcm modprobe --ignore-install snd-pcm && { modprobe snd-pcm-oss ; : ; }
install snd-mixer modprobe --ignore-install snd-mixer && { modprobe snd-mixer-oss ; : ; }
install snd-seq modprobe --ignore-install snd-seq && { modprobe snd-seq-midi ; modprobe snd-seq-oss ; : ; }
# Cause a script to be run after snd-emu8000-synth module initialization
install snd-emu8000-synth modprobe --ignore-install snd-emu8000-synth && /lib/alsa/modprobe-post-install snd-emu8000-synth
# Cause a script to be run after card driver module initialization
install snd-ad1816a modprobe --ignore-install snd-ad1816a && /lib/alsa/modprobe-post-install snd-ad1816a
install snd-ad1848 modprobe --ignore-install snd-ad1848 && /lib/alsa/modprobe-post-install snd-ad1848
install snd-ali5451 modprobe --ignore-install snd-ali5451 && /lib/alsa/modprobe-post-install snd-ali5451
install snd-als100 modprobe --ignore-install snd-als100 && /lib/alsa/modprobe-post-install snd-als100
install snd-als4000 modprobe --ignore-install snd-als4000 && /lib/alsa/modprobe-post-install snd-als4000
install snd-asihpi modprobe --ignore-install snd-asihpi && /lib/alsa/modprobe-post-install snd-asihpi
install snd-atiixp modprobe --ignore-install snd-atiixp && /lib/alsa/modprobe-post-install snd-atiixp
install snd-au8810 modprobe --ignore-install snd-au8810 && /lib/alsa/modprobe-post-install snd-au8810
install snd-au8820 modprobe --ignore-install snd-au8820 && /lib/alsa/modprobe-post-install snd-au8820
install snd-au8830 modprobe --ignore-install snd-au8830 && /lib/alsa/modprobe-post-install snd-au8830
install snd-azt2320 modprobe --ignore-install snd-azt2320 && /lib/alsa/modprobe-post-install snd-azt2320
install snd-azt3328 modprobe --ignore-install snd-azt3328 && /lib/alsa/modprobe-post-install snd-azt3328
install snd-azx modprobe --ignore-install snd-azx && /lib/alsa/modprobe-post-install snd-azx
install snd-ca0106 modprobe --ignore-install snd-ca0106 && /lib/alsa/modprobe-post-install snd-ca0106
install snd-cmi8330 modprobe --ignore-install snd-cmi8330 && /lib/alsa/modprobe-post-install snd-cmi8330
install snd-cmipci modprobe --ignore-install snd-cmipci && /lib/alsa/modprobe-post-install snd-cmipci
install snd-cs4231 modprobe --ignore-install snd-cs4231 && /lib/alsa/modprobe-post-install snd-cs4231
install snd-cs4232 modprobe --ignore-install snd-cs4232 && /lib/alsa/modprobe-post-install snd-cs4232
install snd-cs4236 modprobe --ignore-install snd-cs4236 && /lib/alsa/modprobe-post-install snd-cs4236
install snd-cs4281 modprobe --ignore-install snd-cs4281 && /lib/alsa/modprobe-post-install snd-cs4281
install snd-cs46xx modprobe --ignore-install snd-cs46xx && /lib/alsa/modprobe-post-install snd-cs46xx
install snd-darla20 modprobe --ignore-install snd-darla20 && /lib/alsa/modprobe-post-install snd-darla20
install snd-darla24 modprobe --ignore-install snd-darla24 && /lib/alsa/modprobe-post-install snd-darla24
install snd-dt019x modprobe --ignore-install snd-dt019x && /lib/alsa/modprobe-post-install snd-dt019x
install snd-emu10k1 modprobe --ignore-install snd-emu10k1 && /lib/alsa/modprobe-post-install snd-emu10k1
install snd-emu10k1x modprobe --ignore-install snd-emu10k1x && /lib/alsa/modprobe-post-install snd-emu10k1x
install snd-ens1370 modprobe --ignore-install snd-ens1370 && /lib/alsa/modprobe-post-install snd-ens1370
install snd-ens1371 modprobe --ignore-install snd-ens1371 && /lib/alsa/modprobe-post-install snd-ens1371
install snd-es1688 modprobe --ignore-install snd-es1688 && /lib/alsa/modprobe-post-install snd-es1688
install snd-es18xx modprobe --ignore-install snd-es18xx && /lib/alsa/modprobe-post-install snd-es18xx
install snd-es1938 modprobe --ignore-install snd-es1938 && /lib/alsa/modprobe-post-install snd-es1938
install snd-es1968 modprobe --ignore-install snd-es1968 && /lib/alsa/modprobe-post-install snd-es1968
install snd-es968 modprobe --ignore-install snd-es968 && /lib/alsa/modprobe-post-install snd-es968
install snd-fm801 modprobe --ignore-install snd-fm801 && /lib/alsa/modprobe-post-install snd-fm801
install snd-gina20 modprobe --ignore-install snd-gina20 && /lib/alsa/modprobe-post-install snd-gina20
install snd-gina24 modprobe --ignore-install snd-gina24 && /lib/alsa/modprobe-post-install snd-gina24
install snd-gina3g modprobe --ignore-install snd-gina3g && /lib/alsa/modprobe-post-install snd-gina3g
install snd-gusclassic modprobe --ignore-install snd-gusclassic && /lib/alsa/modprobe-post-install snd-gusclassic
install snd-gusextreme modprobe --ignore-install snd-gusextreme && /lib/alsa/modprobe-post-install snd-gusextreme
install snd-gusmax modprobe --ignore-install snd-gusmax && /lib/alsa/modprobe-post-install snd-gusmax
install snd-harmony modprobe --ignore-install snd-harmony && /lib/alsa/modprobe-post-install snd-harmony
install snd-hdsp modprobe --ignore-install snd-hdsp && /lib/alsa/modprobe-post-install snd-hdsp
install snd-hdspm modprobe --ignore-install snd-hdspm && /lib/alsa/modprobe-post-install snd-hdspm
install snd-ice1712 modprobe --ignore-install snd-ice1712 && /lib/alsa/modprobe-post-install snd-ice1712
install snd-ice1724 modprobe --ignore-install snd-ice1724 && /lib/alsa/modprobe-post-install snd-ice1724
install snd-indigo modprobe --ignore-install snd-indigo && /lib/alsa/modprobe-post-install snd-indigo
install snd-indigodj modprobe --ignore-install snd-indigodj && /lib/alsa/modprobe-post-install snd-indigodj
install snd-indigoio modprobe --ignore-install snd-indigoio && /lib/alsa/modprobe-post-install snd-indigoio
install snd-intel8x0 modprobe --ignore-install snd-intel8x0 && /lib/alsa/modprobe-post-install snd-intel8x0
install snd-interwave modprobe --ignore-install snd-interwave && /lib/alsa/modprobe-post-install snd-interwave
install snd-interwave-stb modprobe --ignore-install snd-interwave-stb && /lib/alsa/modprobe-post-install snd-interwave-stb
install snd-korg1212 modprobe --ignore-install snd-korg1212 && /lib/alsa/modprobe-post-install snd-korg1212
install snd-layla20 modprobe --ignore-install snd-layla20 && /lib/alsa/modprobe-post-install snd-layla20
install snd-layla24 modprobe --ignore-install snd-layla24 && /lib/alsa/modprobe-post-install snd-layla24
install snd-layla3g modprobe --ignore-install snd-layla3g && /lib/alsa/modprobe-post-install snd-layla3g
install snd-maestro3 modprobe --ignore-install snd-maestro3 && /lib/alsa/modprobe-post-install snd-maestro3
install snd-mia modprobe --ignore-install snd-mia && /lib/alsa/modprobe-post-install snd-mia
install snd-mixart modprobe --ignore-install snd-mixart && /lib/alsa/modprobe-post-install snd-mixart
install snd-mona modprobe --ignore-install snd-mona && /lib/alsa/modprobe-post-install snd-mona
install snd-mpu401 modprobe --ignore-install snd-mpu401 && /lib/alsa/modprobe-post-install snd-mpu401
install snd-msnd-pinnacle modprobe --ignore-install snd-msnd-pinnacle && /lib/alsa/modprobe-post-install snd-msnd-pinnacle
install snd-mtpav modprobe --ignore-install snd-mtpav && /lib/alsa/modprobe-post-install snd-mtpav
install snd-nm256 modprobe --ignore-install snd-nm256 && /lib/alsa/modprobe-post-install snd-nm256
install snd-opl3sa2 modprobe --ignore-install snd-opl3sa2 && /lib/alsa/modprobe-post-install snd-opl3sa2
install snd-opti92x-ad1848 modprobe --ignore-install snd-opti92x-ad1848 && /lib/alsa/modprobe-post-install snd-opti92x-ad1848
install snd-opti92x-cs4231 modprobe --ignore-install snd-opti92x-cs4231 && /lib/alsa/modprobe-post-install snd-opti92x-cs4231
install snd-opti93x modprobe --ignore-install snd-opti93x && /lib/alsa/modprobe-post-install snd-opti93x
install snd-pc98-cs4232 modprobe --ignore-install snd-pc98-cs4232 && /lib/alsa/modprobe-post-install snd-pc98-cs4232
install snd-pcxhr modprobe --ignore-install snd-pcxhr && /lib/alsa/modprobe-post-install snd-pcxhr
install snd-pdaudiocf modprobe --ignore-install snd-pdaudiocf && /lib/alsa/modprobe-post-install snd-pdaudiocf
install snd-pdplus modprobe --ignore-install snd-pdplus && /lib/alsa/modprobe-post-install snd-pdplus
install snd-portman2x4 modprobe --ignore-install snd-portman2x4 && /lib/alsa/modprobe-post-install snd-portman2x4
install snd-powermac modprobe --ignore-install snd-powermac && /lib/alsa/modprobe-post-install snd-powermac
install snd-rme32 modprobe --ignore-install snd-rme32 && /lib/alsa/modprobe-post-install snd-rme32
install snd-rme96 modprobe --ignore-install snd-rme96 && /lib/alsa/modprobe-post-install snd-rme96
install snd-rme9652 modprobe --ignore-install snd-rme9652 && /lib/alsa/modprobe-post-install snd-rme9652
install snd-sa11xx-uda1341 modprobe --ignore-install snd-sa11xx-uda1341 && /lib/alsa/modprobe-post-install snd-sa11xx-uda1341
install snd-sb16 modprobe --ignore-install snd-sb16 && /lib/alsa/modprobe-post-install snd-sb16
install snd-sb8 modprobe --ignore-install snd-sb8 && /lib/alsa/modprobe-post-install snd-sb8
install snd-sbawe modprobe --ignore-install snd-sbawe && /lib/alsa/modprobe-post-install snd-sbawe
install snd-serialmidi modprobe --ignore-install snd-serialmidi && /lib/alsa/modprobe-post-install snd-serialmidi
install snd-serial-u16550 modprobe --ignore-install snd-serial-u16550 && /lib/alsa/modprobe-post-install snd-serial-u16550
install snd-sgalaxy modprobe --ignore-install snd-sgalaxy && /lib/alsa/modprobe-post-install snd-sgalaxy
install snd-sonicvibes modprobe --ignore-install snd-sonicvibes && /lib/alsa/modprobe-post-install snd-sonicvibes
install snd-sscape modprobe --ignore-install snd-sscape && /lib/alsa/modprobe-post-install snd-sscape
install snd-sun-amd7930 modprobe --ignore-install snd-sun-amd7930 && /lib/alsa/modprobe-post-install snd-sun-amd7930
install snd-sun-cs4231 modprobe --ignore-install snd-sun-cs4231 && /lib/alsa/modprobe-post-install snd-sun-cs4231
install snd-sun-dbri modprobe --ignore-install snd-sun-dbri && /lib/alsa/modprobe-post-install snd-sun-dbri
install snd-trident modprobe --ignore-install snd-trident && /lib/alsa/modprobe-post-install snd-trident
install snd-usb-audio modprobe --ignore-install snd-usb-audio && /lib/alsa/modprobe-post-install snd-usb-audio
install snd-usb-usx2y modprobe --ignore-install snd-usb-usx2y && /lib/alsa/modprobe-post-install snd-usb-usx2y
install snd-via82xx modprobe --ignore-install snd-via82xx && /lib/alsa/modprobe-post-install snd-via82xx
install snd-vx222 modprobe --ignore-install snd-vx222 && /lib/alsa/modprobe-post-install snd-vx222
install snd-vxp440 modprobe --ignore-install snd-vxp440 && /lib/alsa/modprobe-post-install snd-vxp440
install snd-vxpocket modprobe --ignore-install snd-vxpocket && /lib/alsa/modprobe-post-install snd-vxpocket
install snd-wavefront modprobe --ignore-install snd-wavefront && /lib/alsa/modprobe-post-install snd-wavefront
install snd-ymfpci modprobe --ignore-install snd-ymfpci && /lib/alsa/modprobe-post-install snd-ymfpci
# Prevent abnormal drivers from grabbing index 0
options snd-atiixp-modem index=-2
options snd-bt87x index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2

et dmseg:
Linux version 2.6.8-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Tue Aug 16 13:22:48 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000021fd0000 (usable)
BIOS-e820: 0000000021fd0000 - 0000000021fdf000 (ACPI data)
BIOS-e820: 0000000021fdf000 - 0000000021fe0000 (ACPI NVS)
BIOS-e820: 0000000021fe0000 - 0000000022000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
543MB LOWMEM available.
On node 0 totalpages: 139216
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 135120 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 1999 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hda5 ro
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 397.170 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 543660k/556864k available (1551k kernel code, 12432k reserved, 690k data , 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 782.33 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Mobile Pentium II stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4528k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe700
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe724, dseg 0xf0000
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x15e0-0x15ef has been reserved
pnp: 00:0a: ioport range 0xef00-0xefaf has been reserved
PnPBIOS: 23 nodes reported by PnP BIOS; 23 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
pnp: Device 00:0d activated.
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4528 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hdaMA, hdb:pio
ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdcMA, hdd:pio
hda: HITACHI_DK229A-10, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 19640880 sectors (10056 M w/512KiB Cache, CHS=20784/15/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
hdc: MATSHITADVD-RAM UJ-810, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 566960k swap on /dev/hda1. Priority:-1 extents:1
EXT3 FS on hda5, internal journal
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PS/2 Generic Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
Capability LSM initialized
Linux agpgart interface v0.100 (c) Dave Jones
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:06.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:02.0 [1014:00eb]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl 0x62
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000006
PCI: Found IRQ 11 for device 0000:00:02.1
Yenta: CardBus bridge found at 0000:00:02.1 [1014:00eb]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl 0x62
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000006
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 11, io base 00008400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 470M
agpgart: AGP aperture is 64M @ 0x40000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.8-2-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
pnp: Device 00:10 activated.
gameport: NS558 PnP at pnp00:10 io 0x200 size 8 speed 685 kHz
irda_init()
NET: Registered protocol family 23
cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0300140(lo)
IPv6 over IPv4 tunneling driver

y-at-il des choses que je pourrais enlever ou modifier?

Poste le Tuesday 24 January 2006 19:19:32