bonjour,
je viens fraichement de compiler le noyau 2.6.1, j'ai compilé avec la patch supermount2.6.1, je pense avois bien configuere le noyau pour supermount (il ya je crois juste une ligne à activer: (M) supermount removable media support

debian:/home/thonyox# modprobe supermount
FATAL: Error inserting supermount (/lib/modules/2.6.1/kernel/fs/supermount/supermount.ko): Unknown symbol in module, or unknown parameter (see dmesg)
debian:/home/thonyox# dmesg
Linux version 2.6.1 (root@debian) (version gcc 3.3.3 20040125 (prerelease) (Debian)) #1 Wed Feb 4 15:26:16 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS)
BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
254MB LOWMEM available.
On node 0 totalpages: 65264
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61168 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f7600
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=Linux ro root=302
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 801.957 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 253812k/261056k available (2499k kernel code, 6524k reserved, 962k data, 208k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1585.15 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 801.0688 MHz.
..... host bus clock speed is 100.0211 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
VFS: Disk quotas dquot_6.5.1
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.5.0)
pcnet32.c:v1.27b 01.10.2002 tsbogend@alpha.franken.de
HDLC support module revision 1.16
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 0000:00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
hda: ST320413A, ATA DISK drive
hdb: IBM-DHEA-36481, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: DVD-ROM BDV212B, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG CD-R/RW SW-240B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39102336 sectors (20020 M w/1024KiB Cache, CHS=38792/16/63
hda: hda1 hda2
hdb: max request size: 128KiB
hdb: 12692736 sectors (6498 M w/472KiB Cache, CHS=12592/16/63
hdb: hdb1
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
ide-floppy driver 0.99.newide
Red Hat/Adaptec aacraid driver (1.1.2-lk1 Feb 4 2004)
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.037.
3w-xxxx: No cards found.
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 10
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
i2o_scsi.c: Version 0.1.2
chain_pool: 0 bytes @ cfd78380
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 208k freed
Adding 489972k swap on /dev/hda1. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
Intel 810 + AC97 Audio, version 0.24, 01:03:31 Feb 9 2004
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH 82801AA found at IO 0xd800 and 0xd400, MEM 0x0000 and 0x0000, IRQ 9
i810_audio: Audio Controller supports 2 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
i810_audio: setting clocking to 48607
NET: Registered protocol family 8
NET: Registered protocol family 20
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
supermount: Unknown symbol do_kern_mount
supermount: Unknown symbol dnotify_parent
supermount: Unknown symbol do_remount_sb
supermount: Unknown symbol do_kern_mount
supermount: Unknown symbol dnotify_parent
supermount: Unknown symbol do_remount_sb
request_module: failed /sbin/modprobe -- supermount. error = 256
supermount: Unknown symbol do_kern_mount
supermount: Unknown symbol dnotify_parent
supermount: Unknown symbol do_remount_sb
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 11, io base 0000d000
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: new USB device on port 1, assigned address 2
drivers/usb/core/usb.c: registered new driver speedtch
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
i810_audio: drain_dac, dma timeout?
i810_audio: drain_dac, dma timeout?
i810_audio: drain_dac, dma timeout?
usb 1-1: bulk timeout on ep5in
usbfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
supermount: Unknown symbol do_kern_mount
supermount: Unknown symbol dnotify_parent
supermount: Unknown symbol do_remount_sb
supermount: Unknown symbol do_kern_mount
supermount: Unknown symbol dnotify_parent
supermount: Unknown symbol do_remount_sb
supermount: Unknown symbol do_kern_mount
supermount: Unknown symbol dnotify_parent
supermount: Unknown symbol do_remount_sb
supermount: Unknown symbol do_kern_mount
supermount: Unknown symbol dnotify_parent
supermount: Unknown symbol do_remount_sb
debian:/home/thonyox#

quelqu'un a une idée?

Poste le Monday 9 February 2004 09:34:09