Conversation
precedente ou
suivante
Page: 1 sur 2
APN non reconnu sous Debian
Envoyé par:
tyler-durden
Salut tout le monde,
J'ai réinstallé récemment mon ordinateur avec une version testing de Debian sur laquelle j'ai réinstallé tout les paquets présents sur mon ancienne config.
Hors, Aujourd'hui, j'ai connecté mon appareil photo à mon ordi et Debian n'a pas bronché, alors que d'habitude, sur mon ancienne config, la carte mémoire se montait spontanément.
Mon appareil photo est un Pentax K10d, il se branche en USB bien sur et sa carte est une Carte SD 2Go.
Je suis aller dans /dev/ pour voir ce qui se passe lors de la connexion de mon appareil:
il créait 5 fichiers:
- usbdev2.4_ep00
- usbdev2.4_ep02
- usbdev2.4_ep81
- usbdev2.4_ep83
- sg2
J'ai essayer de monté le fichier /dev/sg2 sans succès. Je suppose qu'il me manque un module?
J'ai réinstallé récemment mon ordinateur avec une version testing de Debian sur laquelle j'ai réinstallé tout les paquets présents sur mon ancienne config.
Hors, Aujourd'hui, j'ai connecté mon appareil photo à mon ordi et Debian n'a pas bronché, alors que d'habitude, sur mon ancienne config, la carte mémoire se montait spontanément.
Mon appareil photo est un Pentax K10d, il se branche en USB bien sur et sa carte est une Carte SD 2Go.
Je suis aller dans /dev/ pour voir ce qui se passe lors de la connexion de mon appareil:
il créait 5 fichiers:
- usbdev2.4_ep00
- usbdev2.4_ep02
- usbdev2.4_ep81
- usbdev2.4_ep83
- sg2
J'ai essayer de monté le fichier /dev/sg2 sans succès. Je suppose qu'il me manque un module?
Poste le Sunday 4 January 2009 14:37:07
Re: APN non reconnu sous Debian
Envoyé par:
nicola
Tu as peut-être changé de gestionnaire de bureau, or c’est peut-être une mauvaise idée.
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
Poste le Sunday 4 January 2009 18:49:45
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
J'utilise toujours Gnome et Nautilus, tout comme avant...
Poste le Sunday 4 January 2009 19:28:44
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
il dit toujours la même chose, que l'appareil soit brancher ou non :
/dev/sda6 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) fusectl on /sys/fs/fuse/connections type fusectl (rw) /dev/sda3 on /windows type vfat (rw,noexec,nosuid,nodev,utf8,uid=1000,gid=1000) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
Poste le Monday 5 January 2009 15:51:46
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
Bon, je pense que je vais profité des soldes pour me payé un lecteur de carte, ce sera plus simple... Je suppose qu'il sont tous reconnus sans problème?
Poste le Tuesday 6 January 2009 17:30:15
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
MAYHEM:/home/tyler-durden/Desktop/cinepaint-0.22-1# lsusb Bus 002 Device 011: ID 0a17:006e Pentax Corp. Pentax K10D Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse Bus 001 Device 002: ID 058f:9254 Alcor Micro Corp. Hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MAYHEM:/home/tyler-durden/Desktop/cinepaint-0.22-1# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000001 Device Boot Start End Blocks Id System /dev/sda1 * 1 16074 129114373+ 5 Extended /dev/sda3 16075 60801 359269627+ b W95 FAT32 /dev/sda5 15675 16074 3212968+ 82 Linux swap / Solaris /dev/sda6 11754 15674 31495401 83 Linux /dev/sda7 1 3921 31495338 83 Linux /dev/sda8 3922 11753 62910508+ 83 Linux Partition table entries are not in disk order
Poste le Tuesday 6 January 2009 18:29:22
Re: APN non reconnu sous Debian
Envoyé par:
nicola
Citation
tyler-durden
MAYHEM
}-F
Citation
Bus 002 Device 011: ID 0a17:006e Pentax Corp. Pentax K10D
On dirait qu’il est bien là.
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
Poste le Tuesday 6 January 2009 19:47:18
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
Citation
nicola
Bus 002 Device 011: ID 0a17:006e Pentax Corp.
Pentax K10D
On dirait qu’il est bien là.
Oui j'avais remarqué... Et pourtant, pas de "/dev/xxx" mountable...
(Soit dit en passant, je n'arrive pas non plus à faire de d'acquisition video sous debian testing à partir de ma carte firewire, mais ça, ça sera l'objet d'une autre discution, enfin sauf si vous y voyer un rapport)
Poste le Tuesday 6 January 2009 20:15:21
Re: APN non reconnu sous Debian
Envoyé par:
Basile STARYNKEVITCH
Que raconte dmesg juste après le branchement de l'APN?
----
Basile STARYNKEVITCH
Membre de l'APRIL « promouvoir et défendre le logiciel libre » - adhérez vous aussi à l'APRIL!
Projet logiciel libre: RefPerSys
----
Basile STARYNKEVITCH
Membre de l'APRIL « promouvoir et défendre le logiciel libre » - adhérez vous aussi à l'APRIL!
Projet logiciel libre: RefPerSys
Poste le Tuesday 6 January 2009 20:17:14
Re: APN non reconnu sous Debian
Envoyé par:
nicola
Regarde les fichiers qui ont changé dans /var/log/ quand tu as inséré l’appareil photo. Le noyau devrait dire des choses.
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
Poste le Tuesday 6 January 2009 20:27:06
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
smesg renvoi:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 17:25:36 UTC 2008 [ 0.000000] Command line: root=/dev/sda6 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfffe000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851904) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] max_pfn_mapped = 1245184 [ 0.000000] init_memory_mapping [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F9810, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFC0000, 0034 (r1 031108 RSDT1839 20080311 MSFT 97) [ 0.000000] ACPI: FACP CFFC0200, 0084 (r1 031108 FACP1839 20080311 MSFT 97) [ 0.000000] ACPI: DSDT CFFC0440, 4B9F (r1 1ADKU 1ADKU004 4 INTL 20051117) [ 0.000000] ACPI: FACS CFFCE000, 0040 [ 0.000000] ACPI: APIC CFFC0390, 0070 (r1 031108 APIC1839 20080311 MSFT 97) [ 0.000000] ACPI: MCFG CFFC0400, 003C (r1 031108 OEMMCFG 20080311 MSFT 97) [ 0.000000] ACPI: OEMB CFFCE040, 0071 (r1 031108 OEMB1839 20080311 MSFT 97) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851904) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 0000000000038fff] pages 26 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS [ 0.000000] early res: 3 [37990000-37fefa5b] RAMDISK [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20003800000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000cbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851904 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048415 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1248 pages reserved [ 0.000000] DMA zone: 2695 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833528 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000 [ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000cfffe000 [ 0.000000] PM: Registered nosave memory: 00000000cfffe000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cfffe000:2ec02000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030143 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda6 ro quiet [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 2686.313 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Node 0: aperture @ 4000000 size 32 MB [ 0.004000] Aperture pointing to e820 RAM. Ignoring. [ 0.004000] No AGP bridge found [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 4000000 [ 0.004000] PM: Registered nosave memory: 0000000004000000 - 0000000008000000 [ 0.004000] Memory: 4057272k/4980736k available (2226k kernel code, 136388k reserved, 1082k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084103] Calibrating delay using timer specific routine.. 5378.42 BogoMIPS (lpj=10756854) [ 0.084147] Security Framework initialized [ 0.084151] SELinux: Disabled at boot. [ 0.084154] Capability LSM initialized [ 0.084478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.086704] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.087785] Mount-cache hash table entries: 256 [ 0.087917] Initializing cgroup subsys ns [ 0.087920] Initializing cgroup subsys cpuacct [ 0.087922] Initializing cgroup subsys devices [ 0.087938] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.087940] CPU: L2 Cache: 512K (64 bytes/line) [ 0.087942] CPU 0/0 -> Node 0 [ 0.087951] CPU: Physical Processor ID: 0 [ 0.087953] CPU: Processor Core ID: 0 [ 0.088523] ACPI: Core revision 20080321 [ 0.138530] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.138533] Using local APIC timer interrupts. [ 0.144009] APIC timer calibration result 12436679 [ 0.144009] Detected 12.436 MHz APIC timer. [ 0.144009] Booting processor 1/1 ip 6000 [ 0.152009] Initializing CPU#1 [ 0.152009] Calibrating delay using timer specific routine.. 5372.67 BogoMIPS (lpj=10745349) [ 0.152009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.152009] CPU: L2 Cache: 512K (64 bytes/line) [ 0.152009] CPU 1/1 -> Node 0 [ 0.152009] CPU: Physical Processor ID: 0 [ 0.152009] CPU: Processor Core ID: 1 [ 0.231942] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.231954] Brought up 2 CPUs [ 0.231956] Total of 2 processors activated (10751.10 BogoMIPS). [ 0.232014] CPU0 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 0 1 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] CPU1 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 1 0 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] net_namespace: 1224 bytes [ 0.232014] Booting paravirtualized kernel on bare hardware [ 0.232014] NET: Registered protocol family 16 [ 0.232014] node 0 link 0: io port [1000, ffffff] [ 0.232014] node 0 link 0: io port [2000, 2fff] [ 0.232014] TOM: 00000000d0000000 aka 3328M [ 0.232014] node 0 link 0: mmio [e0000000, efffffff] [ 0.232014] node 0 link 0: mmio [a0000, bffff] [ 0.232014] node 0 link 0: mmio [d0000000, fe0bffff] [ 0.232014] TOM2: 0000000130000000 aka 4864M [ 0.232014] bus: [00,ff] on node 0 link 0 [ 0.232014] bus: 00 index 0 io port: [0, ffff] [ 0.232014] bus: 00 index 1 mmio: [d0000000, ffffffff] [ 0.232014] bus: 00 index 2 mmio: [a0000, bffff] [ 0.232014] bus: 00 index 3 mmio: [130000000, fcffffffff] [ 0.232014] ACPI: bus type pci registered [ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.232014] PCI: Not using MMCONFIG. [ 0.232014] PCI: Using configuration type 1 for base access [ 0.232014] ACPI: EC: Look up EC in DSDT [ 0.239612] ACPI: Interpreter enabled [ 0.239614] ACPI: (supports S0 S1 S3 S4 S5) [ 0.239629] ACPI: Using IOAPIC for interrupt routing [ 0.239673] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.243742] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.256016] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.264016] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.264016] PCI: Transparent bridge - 0000:00:08.0 [ 0.264016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.264016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.264016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.264016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.264016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.272017] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.272017] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.272017] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.272017] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.272017] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 0.272017] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.272017] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.272017] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.272017] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.272017] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.272017] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.275200] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.275398] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.275591] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.275789] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.276015] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.276210] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 0.276403] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 0.276737] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - D0, should be C3 [20080321] [ 0.276743] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.276873] pnp: PnP ACPI init [ 0.276879] ACPI: bus type pnp registered [ 0.276894] pnp 00:00: parse allocated resources [ 0.277013] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 0.277158] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.277172] pnp 00:01: parse allocated resources [ 0.277180] pnp 00:01: add dma 4 flags 0x4 [ 0.277181] pnp 00:01: add io 0x0-0xf flags 0x1 [ 0.277183] pnp 00:01: add io 0x81-0x83 flags 0x1 [ 0.277185] pnp 00:01: add io 0x87-0x87 flags 0x1 [ 0.277186] pnp 00:01: add io 0x89-0x8b flags 0x1 [ 0.277188] pnp 00:01: add io 0x8f-0x8f flags 0x1 [ 0.277189] pnp 00:01: add io 0xc0-0xdf flags 0x1 [ 0.277324] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.277335] pnp 00:02: parse allocated resources [ 0.277338] pnp 00:02: add io 0x61-0x61 flags 0x1 [ 0.277472] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.277483] pnp 00:03: parse allocated resources [ 0.277487] pnp 00:03: add io 0xf0-0xff flags 0x1 [ 0.277497] pnp 00:03: add irq 13 flags 0x1 [ 0.277632] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.277837] pnp 00:04: parse allocated resources [ 0.278085] pnp 00:04: add io 0x3f8-0x3ff flags 0x1 [ 0.278092] pnp 00:04: add irq 4 flags 0x1 [ 0.278094] pnp 00:04: parse resource options [ 0.278096] pnp 00:04: new independent option [ 0.278124] pnp 00:04: new dependent option (priority 0x0) [ 0.278127] pnp 00:04: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.278131] pnp 00:04: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 [ 0.278133] pnp 00:04: new dependent option (priority 0x1) [ 0.278135] pnp 00:04: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.278138] pnp 00:04: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.278141] pnp 00:04: new dependent option (priority 0x1) [ 0.278143] pnp 00:04: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 [ 0.278146] pnp 00:04: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.278148] pnp 00:04: new dependent option (priority 0x1) [ 0.278150] pnp 00:04: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 [ 0.278154] pnp 00:04: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.278156] pnp 00:04: new dependent option (priority 0x1) [ 0.278158] pnp 00:04: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 [ 0.278161] pnp 00:04: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.278163] pnp 00:04: end dependent options [ 0.278300] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.278699] pnp 00:05: parse allocated resources [ 0.279001] pnp 00:05: add io 0x3f0-0x3f5 flags 0x1 [ 0.279001] pnp 00:05: add io 0x3f7-0x3f7 flags 0x1 [ 0.279001] pnp 00:05: add irq 6 flags 0x1 [ 0.279001] pnp 00:05: add dma 2 flags 0x0 [ 0.279001] pnp 00:05: parse resource options [ 0.279001] pnp 00:05: new independent option [ 0.279001] pnp 00:05: new dependent option (priority 0x0) [ 0.279001] pnp 00:05: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1 [ 0.279001] pnp 00:05: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 [ 0.279001] pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1 [ 0.279001] pnp 00:05: dma bitmask 0x4 flags 0x0 [ 0.279001] pnp 00:05: new dependent option (priority 0x1) [ 0.279001] pnp 00:05: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1 [ 0.279001] pnp 00:05: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 [ 0.279001] pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.279001] pnp 00:05: dma bitmask 0xf flags 0x0 [ 0.279001] pnp 00:05: new dependent option (priority 0x1) [ 0.279001] pnp 00:05: io min 0x370 max 0x370 align 1 size 6 flags 0x1 [ 0.279001] pnp 00:05: io min 0x377 max 0x377 align 1 size 1 flags 0x1 [ 0.279001] pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.279001] pnp 00:05: dma bitmask 0xf flags 0x0 [ 0.279001] pnp 00:05: end dependent options [ 0.279001] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.279001] pnp 00:06: parse allocated resources [ 0.279001] pnp 00:06: add io 0x378-0x37f flags 0x1 [ 0.279001] pnp 00:06: add irq 7 flags 0x1 [ 0.279001] pnp 00:06: parse resource options [ 0.279001] pnp 00:06: new independent option [ 0.279179] pnp 00:06: new dependent option (priority 0x1) [ 0.279181] pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1 [ 0.279184] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.279187] pnp 00:06: new dependent option (priority 0x1) [ 0.279189] pnp 00:06: io min 0x278 max 0x278 align 1 size 8 flags 0x1 [ 0.279192] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.279194] pnp 00:06: new dependent option (priority 0x1) [ 0.279196] pnp 00:06: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 [ 0.279199] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.279201] pnp 00:06: end dependent options [ 0.283001] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.283001] pnp 00:07: parse allocated resources [ 0.283001] pnp 00:07: add io 0x10-0x1f flags 0x1 [ 0.283001] pnp 00:07: add io 0x22-0x3f flags 0x1 [ 0.283001] pnp 00:07: add io 0x44-0x4d flags 0x1 [ 0.283001] pnp 00:07: add io 0x50-0x5f flags 0x1 [ 0.283001] pnp 00:07: add io 0x62-0x63 flags 0x1 [ 0.283001] pnp 00:07: add io 0x65-0x6f flags 0x1 [ 0.283001] pnp 00:07: add io 0x72-0x7f flags 0x1 [ 0.283001] pnp 00:07: add io 0x80-0x80 flags 0x1 [ 0.283001] pnp 00:07: add io 0x84-0x86 flags 0x1 [ 0.283001] pnp 00:07: add io 0x88-0x88 flags 0x1 [ 0.283001] pnp 00:07: add io 0x8c-0x8e flags 0x1 [ 0.283001] pnp 00:07: add io 0x90-0x9f flags 0x1 [ 0.283001] pnp 00:07: add io 0xa2-0xbf flags 0x1 [ 0.283001] pnp 00:07: add io 0xe0-0xef flags 0x1 [ 0.283001] pnp 00:07: add io 0x4d0-0x4d1 flags 0x1 [ 0.283001] pnp 00:07: add io 0x800-0x80f flags 0x1 [ 0.283001] pnp 00:07: add io 0x2000-0x207f flags 0x1 [ 0.283001] pnp 00:07: add io 0x2080-0x20ff flags 0x1 [ 0.283001] pnp 00:07: add io 0x2400-0x247f flags 0x1 [ 0.283001] pnp 00:07: add io 0x2480-0x24ff flags 0x1 [ 0.283001] pnp 00:07: add io 0x2800-0x287f flags 0x1 [ 0.283001] pnp 00:07: add io 0x2880-0x28ff flags 0x1 [ 0.283001] pnp 00:07: add io 0x2c00-0x2c7f flags 0x1 [ 0.283001] pnp 00:07: add io 0x2c80-0x2cff flags 0x1 [ 0.283001] pnp 00:07: add mem 0xfec80000-0x1fd93ffff flags 0x0 [ 0.283001] pnp 00:07: add mem 0xfee01000-0xfeefffff flags 0x0 [ 0.283001] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.283001] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283001] pnp 00:08: parse allocated resources [ 0.283001] pnp 00:08: add io 0x70-0x71 flags 0x1 [ 0.283001] pnp 00:08: add irq 8 flags 0x1 [ 0.283001] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.283001] pnp 00:09: parse allocated resources [ 0.283001] pnp 00:09: add mem 0xfec00000-0xfec00fff flags 0x0 [ 0.283001] pnp 00:09: add mem 0xfee00000-0xfee00fff flags 0x0 [ 0.283001] pnp 00:09: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.283001] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283001] pnp 00:0a: parse allocated resources [ 0.283001] pnp 00:0a: add io 0x60-0x60 flags 0x1 [ 0.283001] pnp 00:0a: add io 0x64-0x64 flags 0x1 [ 0.283001] pnp 00:0a: add irq 1 flags 0x1 [ 0.283001] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.283001] pnp 00:0b: parse allocated resources [ 0.283001] pnp 00:0b: add io 0x0-0xffffffffffffffff flags 0x10000001 [ 0.283001] pnp 00:0b: add io 0xa00-0xa0f flags 0x1 [ 0.283001] pnp 00:0b: add io 0xa10-0xa1f flags 0x1 [ 0.283001] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.283001] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283001] pnp 00:0c: parse allocated resources [ 0.283001] pnp 00:0c: add mem 0xe0000000-0xefffffff flags 0x0 [ 0.283001] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.283001] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283001] pnp 00:0d: parse allocated resources [ 0.283001] pnp 00:0d: add mem 0x0-0x9ffff flags 0x1 [ 0.283001] pnp 00:0d: add mem 0xc0000-0xcffff flags 0x0 [ 0.283001] pnp 00:0d: add mem 0xe0000-0xfffff flags 0x0 [ 0.283001] pnp 00:0d: add mem 0x100000-0xcfffffff flags 0x1 [ 0.283001] pnp 00:0d: add mem 0xfec00000-0xffffffff flags 0x0 [ 0.283001] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c [ 0.283001] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.283001] pnp: PnP ACPI: found 14 devices [ 0.283001] ACPI: ACPI bus type pnp unregistered [ 0.283001] usbcore: registered new interface driver usbfs [ 0.283001] usbcore: registered new interface driver hub [ 0.283001] usbcore: registered new device driver usb [ 0.283001] PCI: Using ACPI for IRQ routing [ 0.299139] PCI-DMA: Disabling AGP. [ 0.299139] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 0.299139] PCI-DMA: using GART IOMMU. [ 0.299139] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.299139] ACPI: RTC can wake from S4 [ 0.314043] pnp: the driver 'system' has been registered [ 0.314060] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.314063] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.314065] system 00:07: ioport range 0x2000-0x207f has been reserved [ 0.314067] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 0.314069] system 00:07: ioport range 0x2400-0x247f has been reserved [ 0.314071] system 00:07: ioport range 0x2480-0x24ff has been reserved [ 0.314073] system 00:07: ioport range 0x2800-0x287f has been reserved [ 0.314077] system 00:07: ioport range 0x2880-0x28ff has been reserved [ 0.314079] system 00:07: ioport range 0x2c00-0x2c7f has been reserved [ 0.314081] system 00:07: ioport range 0x2c80-0x2cff has been reserved [ 0.314084] system 00:07: iomem range 0xfec80000-0x1fd93ffff could not be reserved [ 0.314087] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved [ 0.314089] system 00:07: driver attached [ 0.314095] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.314098] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.314100] system 00:09: driver attached [ 0.314105] system 00:0b: ioport range 0xa00-0xa0f has been reserved [ 0.314108] system 00:0b: ioport range 0xa10-0xa1f has been reserved [ 0.314110] system 00:0b: driver attached [ 0.314116] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.314118] system 00:0c: driver attached [ 0.314125] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.314127] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.314129] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.314131] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved [ 0.314133] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.314135] system 00:0d: driver attached [ 0.315579] PCI: Bridge: 0000:00:08.0 [ 0.315579] IO window: disabled. [ 0.315579] MEM window: disabled. [ 0.315579] PREFETCH window: disabled. [ 0.315579] PCI: Bridge: 0000:00:0b.0 [ 0.315579] IO window: disabled. [ 0.315579] MEM window: disabled. [ 0.315579] PREFETCH window: disabled. [ 0.315579] PCI: Bridge: 0000:00:0c.0 [ 0.315579] IO window: d000-dfff [ 0.315579] MEM window: 0xf9f00000-0xf9ffffff [ 0.315580] PREFETCH window: disabled. [ 0.315580] PCI: Bridge: 0000:00:0d.0 [ 0.315580] IO window: e000-efff [ 0.315580] MEM window: 0xfa000000-0xfebfffff [ 0.315580] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.315580] PCI: Bridge: 0000:00:0e.0 [ 0.315580] IO window: disabled. [ 0.315580] MEM window: disabled. [ 0.315580] PREFETCH window: disabled. [ 0.315580] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.315580] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.315580] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.315580] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.315580] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.315580] NET: Registered protocol family 2 [ 0.318947] Switched to high resolution mode on CPU 0 [ 0.322288] Switched to high resolution mode on CPU 1 [ 0.351278] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.355129] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.359127] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.359559] TCP: Hash tables configured (established 524288 bind 65536) [ 0.359559] TCP reno registered [ 0.370142] NET: Registered protocol family 1 [ 0.370229] checking if image is initramfs... it is [ 0.731554] Freeing initrd memory: 6526k freed [ 0.735559] audit: initializing netlink socket (disabled) [ 0.735559] type=2000 audit(1231268508.724:1): initialized [ 0.735559] Total HugeTLB memory allocated, 0 [ 0.735559] VFS: Disk quotas dquot_6.5.1 [ 0.735559] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.735611] msgmni has been set to 7937 [ 0.739556] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.739556] io scheduler noop registered [ 0.739556] io scheduler anticipatory registered [ 0.739556] io scheduler deadline registered [ 0.739556] io scheduler cfq registered (default) [ 0.739556] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.759608] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.759621] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.759643] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.759656] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.759668] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.759681] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.759694] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.759714] pci 0000:04:00.0: Boot video device [ 0.759814] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.759830] assign_interrupt_mode Found MSI capability [ 0.759847] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.759900] Allocate Port Service[0000:00:0b.0:pcie03] [ 0.759969] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.759985] assign_interrupt_mode Found MSI capability [ 0.759997] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.760045] Allocate Port Service[0000:00:0c.0:pcie03] [ 0.760112] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.760127] assign_interrupt_mode Found MSI capability [ 0.760139] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.760186] Allocate Port Service[0000:00:0d.0:pcie03] [ 0.760253] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.760268] assign_interrupt_mode Found MSI capability [ 0.760280] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.760326] Allocate Port Service[0000:00:0e.0:pcie03] [ 0.764291] Linux agpgart interface v0.103 [ 0.764291] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.764291] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.764291] pnp: the driver 'serial' has been registered [ 0.764291] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.764291] serial 00:04: driver attached [ 0.764291] brd: module loaded [ 0.764291] input: Macintosh mouse button emulation as /class/input/input0 [ 0.764291] pnp: the driver 'i8042 kbd' has been registered [ 0.764291] i8042 kbd 00:0a: driver attached [ 0.764291] pnp: the driver 'i8042 aux' has been registered [ 0.764291] PNP: PS/2 Controller [PNP0303S2K] at 0x60,0x64 irq 1 [ 0.764291] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.768290] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.796288] mice: PS/2 mouse device common for all mice [ 0.796288] pnp: the driver 'rtc_cmos' has been registered [ 0.796288] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.796288] rtc0: alarms up to one year, y3k [ 0.796288] rtc_cmos 00:08: driver attached [ 0.796288] cpuidle: using governor ladder [ 0.796288] cpuidle: using governor menu [ 0.796288] No iBFT detected. [ 0.796288] TCP cubic registered [ 0.796288] NET: Registered protocol family 17 [ 0.796288] registered taskstats version 1 [ 0.796288] rtc_cmos 00:08: setting system clock to 2009-01-06 19:01:49 UTC (1231268509) [ 0.796288] Freeing unused kernel memory: 392k freed [ 0.828338] input: AT Translated Set 2 keyboard as /class/input/input1 [ 0.871784] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.871784] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.124841] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 [ 1.124841] ACPI: PCI Interrupt 0000:00:02.1 -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23 [ 1.124841] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 1.124841] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.124841] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.124841] ehci_hcd 0000:00:02.1: debug port 1 [ 1.124841] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 1.124841] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf9efec00 [ 1.129588] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.134267] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.134341] usb usb1: configuration #1 chosen from 1 choice [ 1.134367] hub 1-0:1.0: USB hub found [ 1.134374] hub 1-0:1.0: 10 ports detected [ 1.158702] No dock devices found. [ 1.167708] SCSI subsystem initialized [ 1.183703] libata version 3.00 loaded. [ 1.220707] Floppy drive(s): fd0 is 1.44M [ 1.237341] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.237344] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.237346] usb usb1: Product: EHCI Host Controller [ 1.237347] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd [ 1.237349] usb usb1: SerialNumber: 0000:00:02.1 [ 1.240705] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 [ 1.240705] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 [ 1.240705] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 1.240705] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.240705] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.240705] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf9eff000 [ 1.240705] FDC 0 is a post-1991 82077 [ 1.296707] usb usb2: configuration #1 chosen from 1 choice [ 1.296707] hub 2-0:1.0: USB hub found [ 1.296707] hub 2-0:1.0: 10 ports detected [ 1.401269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.401271] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401273] usb usb2: Product: OHCI Host Controller [ 1.401274] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd [ 1.401276] usb usb2: SerialNumber: 0000:00:02.0 [ 1.401269] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 1.402426] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19 [ 1.402435] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNEA] -> GSI 19 (level, low) -> IRQ 19 [ 1.402449] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 1.402716] eth0: RTL8168b/8111b at 0xffffc20000626000, 00:1d:92:df:20:86, XID 38000000 IRQ 1275 [ 1.410614] Uniform Multi-Platform E-IDE driver [ 1.410614] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.412065] NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller [ 1.412068] NFORCE-MCP65: IDE controller (0x10de:0x0448 rev 0xa1) at PCI slot 0000:00:09.0 [ 1.412088] NFORCE-MCP65: not 100% native mode: will probe irqs later [ 1.412094] NFORCE-MCP65: IDE port disabled [ 1.412098] ide0: BM-DMA at 0xffa0-0xffa7 [ 1.412103] Probing IDE interface ide0... [ 1.786906] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 2.102738] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.103018] ahci 0000:00:0a.0: version 3.0 [ 2.103329] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 2.103336] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 2.148915] usb 2-1: configuration #1 chosen from 1 choice [ 2.151895] hub 2-1:1.0: USB hub found [ 2.155841] hub 2-1:1.0: 4 ports detected [ 2.275950] usb 2-1: New USB device found, idVendor=058f, idProduct=9254 [ 2.275953] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.275955] usb 2-1: Product: Generic USB Hub [ 2.275956] usb 2-1: Manufacturer: ALCOR [ 2.512549] usb 2-1.2: new low speed USB device using ohci_hcd and address 3 [ 2.615520] usb 2-1.2: configuration #1 chosen from 1 choice [ 2.625638] usb 2-1.2: New USB device found, idVendor=04f3, idProduct=0210 [ 2.625640] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.625642] usb 2-1.2: Product: PS/2+USB Mouse [ 2.859515] usbcore: registered new interface driver hiddev [ 2.866327] input: PS/2+USB Mouse as /class/input/input2 [ 2.890355] input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-1.2 [ 2.890371] usbcore: registered new interface driver usbhid [ 2.890373] usbhid: v2.6:USB HID core driver [ 3.374362] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 3.374366] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pmp pio [ 3.374369] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 3.378340] scsi0 : ahci [ 3.378340] scsi1 : ahci [ 3.378340] scsi2 : ahci [ 3.378340] scsi3 : ahci [ 3.378340] ata1: SATA max UDMA/133 abar m8192@0xf9efc000 port 0xf9efc100 irq 1274 [ 3.378340] ata2: SATA max UDMA/133 abar m8192@0xf9efc000 port 0xf9efc180 irq 1274 [ 3.378340] ata3: SATA max UDMA/133 abar m8192@0xf9efc000 port 0xf9efc200 irq 1274 [ 3.378340] ata4: SATA max UDMA/133 abar m8192@0xf9efc000 port 0xf9efc280 irq 1274 [ 3.954349] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.954349] ata1.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133 [ 3.954349] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.954349] ata1.00: configured for UDMA/133 [ 4.290347] ata2: SATA link down (SStatus 0 SControl 300) [ 4.794328] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.802319] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100, ATAPI AN [ 4.802319] ata3.00: configured for UDMA/100 [ 5.138297] ata4: SATA link down (SStatus 0 SControl 300) [ 5.154287] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM350032 MX15 PQ: 0 ANSI: 5 [ 5.154287] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5 [ 5.170284] Driver 'sd' needs updating - please use bus_type methods [ 5.170284] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 M
[ 5.170284] sd 0:0:0:0: [sda] Write Protect is off [ 5.170284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.170284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.170284] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 M
Poste le Tuesday 6 January 2009 20:29:13
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
Citation
nicola
Regarde les fichiers qui ont changé dans /var/log/
quand tu as inséré l’appareil photo. Le noyau
devrait dire des choses.
--
On ne prête qu’aux riches, et on a bien raison,
parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
Il n'ajoute aucun fichier lorsque je le connecte. Par contre, je ne sais pas trop comment vérifier efficacement si les fichiers présents change lors de la connexion.
Poste le Tuesday 6 January 2009 20:33:39
Re: APN non reconnu sous Debian
Envoyé par:
Basile STARYNKEVITCH
Ce qui compte, c'est les quelques dernières lignes de la sortie de dmesg juste après branchement.
Ici on a
Donc l'appareil photo est probablement vu comme /dev/sdb1
On pourrait donc, juste après l'avoir branché, essayer la commande
Après le montage, on peut essayer de lister
----
Basile STARYNKEVITCH
Membre de l'APRIL « promouvoir et défendre le logiciel libre » - adhérez vous aussi à l'APRIL!
Projet logiciel libre: RefPerSys
Ici on a
[ 1737.246947] sdb: sdb1 [ 1737.250945] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1737.250945] sd 4:0:0:0: Attached scsi generic sg2 type 0
Donc l'appareil photo est probablement vu comme /dev/sdb1
On pourrait donc, juste après l'avoir branché, essayer la commande
mount -v /dev/sda1 /mnt1en ayant préalablement créé (une seule fois)
mkdir /mnt1
Après le montage, on peut essayer de lister
ls -la /mnt1 df /mnt1
----
Basile STARYNKEVITCH
Membre de l'APRIL « promouvoir et défendre le logiciel libre » - adhérez vous aussi à l'APRIL!
Projet logiciel libre: RefPerSys
Poste le Tuesday 6 January 2009 20:35:03
Re: APN non reconnu sous Debian
Envoyé par:
Basile STARYNKEVITCH
Citation
: tyler-durden
comment vérifier efficacement si les fichiers présents changent lors de la connexion?
ls -lt /var/log/ | headdonne les fichiers les plus récemment changés. Si par exemple c'est /var/log/daemon.log on peut le regarder par
tail /var/log/daemon.log less /var/log/daemon.log[^]à adapter pour un autre fichier si besoin[/^]
La commande less s'utilise en défilant avec les flèches et en quittant avec la touche q
----
Basile STARYNKEVITCH
Membre de l'APRIL « promouvoir et défendre le logiciel libre » - adhérez vous aussi à l'APRIL!
Projet logiciel libre: RefPerSys
Poste le Tuesday 6 January 2009 20:40:21
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
je suppose que tu voulais mount -v /dev/sdB1
(et je suis aller dans /dev/ et je n'ai trouver aucun sdb1
mount: you didn't specify a filesystem type for /dev/sdb1
I will try all types mentioned in /etc/filesystems or /proc/filesystems
Trying fuseblk
mount: special device /dev/sdb1 does not exist
(et je suis aller dans /dev/ et je n'ai trouver aucun sdb1
Poste le Tuesday 6 January 2009 20:49:26
Re: APN non reconnu sous Debian
Envoyé par:
tyler-durden
Citation
Basile STARYNKEVITCH
: tyler-durden a écrit :comment vérifier
efficacement si les fichiers présents changent
lors de la connexion?ls -lt /var/log/ | headdonne
les fichiers les plus récemment changés. Si par
exemple c'est /var/log/daemon.log on peut le
regarder partail /var/log/daemon.log
less /var/log/daemon.logà adapter pour un autre
fichier si besoin
La commande less s'utilise en défilant avec les
flèches et en quittant avec la touche q
----
Basile STARYNKEVITCH où on trouve mon mél
Membre de l'APRIL « promouvoir et défendre le
logiciel libre » - adhérez vous aussi à l'APRIL!
N.B. N'hesitez pas à consulter aussi mes
contributions antérieures.
ok merci, je ne connais pas assez bien ls...
alors voilà il semblre qu'il change 5 fichiers:
-rw-r----- 1 root adm 128857 jan 6 21:10 daemon.log
-rw-r----- 1 root adm 178049 jan 6 21:10 debug
-rw-r----- 1 root adm 426397 jan 6 21:10 kern.log
-rw-r----- 1 root adm 281272 jan 6 21:10 messages
-rw-r----- 1 root adm 263044 jan 6 21:10 syslog
(à 21h09 j'ai éteint puis rallumer mon APN, résultat:
deamon.log:
Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.805994] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0_scsi_generic'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.821199] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.821733] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.825662] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.829946] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_usbraw'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.833002] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial'). Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.642283] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial'). Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.705227] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0'). Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.727031] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_usbraw'). Jan 6 21:10:04 MAYHEM NetworkManager: <debug> [1231272604.669707] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host'). Jan 6 21:10:04 MAYHEM NetworkManager: <debug> [1231272604.671531] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0'). Jan 6 21:10:04 MAYHEM NetworkManager: <debug> [1231272604.689394] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0_scsi_generic').
debug
Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.805994] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0_scsi_generic'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.821199] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.821733] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.825662] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.829946] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_usbraw'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.833002] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial'). Jan 6 21:09:59 MAYHEM kernel: [ 4687.344953] usb-storage: device found at 5 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344954] usb-storage: waiting for device to settle before scanning Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.642283] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial'). Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.705227] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0'). Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.727031] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_usbraw'). Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] usb-storage: device scan complete Jan 6 21:10:04 MAYHEM kernel: [ 4693.220289] sd 6:0:0:0: [sdb] Mode Sense: 0a 0a 00 01 Jan 6 21:10:04 MAYHEM kernel: [ 4693.228291] sd 6:0:0:0: [sdb] Mode Sense: 0a 0a 00 01 Jan 6 21:10:04 MAYHEM NetworkManager: <debug> [1231272604.669707] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host'). Jan 6 21:10:04 MAYHEM NetworkManager: <debug> [1231272604.671531] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0'). Jan 6 21:10:04 MAYHEM NetworkManager: <debug> [1231272604.689394] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0_scsi_generic').
kern.log
Jan 6 21:09:43 MAYHEM kernel: [ 4669.253538] usb 1-3: USB disconnect, address 4 Jan 6 21:09:59 MAYHEM kernel: [ 4687.199007] usb 1-3: new high speed USB device using ehci_hcd and address 5 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344035] usb 1-3: configuration #1 chosen from 1 choice Jan 6 21:09:59 MAYHEM kernel: [ 4687.344743] scsi6 : SCSI emulation for USB Mass Storage devices Jan 6 21:09:59 MAYHEM kernel: [ 4687.344925] usb 1-3: New USB device found, idVendor=0a17, idProduct=006e Jan 6 21:09:59 MAYHEM kernel: [ 4687.344928] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344929] usb 1-3: Product: K10D Jan 6 21:09:59 MAYHEM kernel: [ 4687.344931] usb 1-3: Manufacturer: PENTAX Corporation Jan 6 21:09:59 MAYHEM kernel: [ 4687.344953] usb-storage: device found at 5 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344954] usb-storage: waiting for device to settle before scanning Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] usb-storage: device scan complete Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] scsi scan: INQUIRY result too short (5), using 36 Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] scsi 6:0:0:0: Direct-Access PENTAX DIGITAL_CAMERA 1.00 PQ: 0 ANSI: 0 Jan 6 21:10:04 MAYHEM kernel: [ 4693.216289] sd 6:0:0:0: [sdb] 4019201 512-byte hardware sectors (2058 M
messages
Jan 6 21:09:43 MAYHEM kernel: [ 4669.253538] usb 1-3: USB disconnect, address 4 Jan 6 21:09:59 MAYHEM kernel: [ 4687.199007] usb 1-3: new high speed USB device using ehci_hcd and address 5 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344035] usb 1-3: configuration #1 chosen from 1 choice Jan 6 21:09:59 MAYHEM kernel: [ 4687.344743] scsi6 : SCSI emulation for USB Mass Storage devices Jan 6 21:09:59 MAYHEM kernel: [ 4687.344925] usb 1-3: New USB device found, idVendor=0a17, idProduct=006e Jan 6 21:09:59 MAYHEM kernel: [ 4687.344928] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344929] usb 1-3: Product: K10D Jan 6 21:09:59 MAYHEM kernel: [ 4687.344931] usb 1-3: Manufacturer: PENTAX Corporation Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] scsi scan: INQUIRY result too short (5), using 36 Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] scsi 6:0:0:0: Direct-Access PENTAX DIGITAL_CAMERA 1.00 PQ: 0 ANSI: 0 Jan 6 21:10:04 MAYHEM kernel: [ 4693.216289] sd 6:0:0:0: [sdb] 4019201 512-byte hardware sectors (2058 M
syslog
Jan 6 21:09:43 MAYHEM kernel: [ 4669.253538] usb 1-3: USB disconnect, address 4 Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.805994] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0_scsi_generic'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.821199] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host_scsi_device_lun0'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.821733] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0_scsi_host'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.825662] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.829946] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_usbraw'). Jan 6 21:09:43 MAYHEM NetworkManager: <debug> [1231272583.833002] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial'). Jan 6 21:09:59 MAYHEM kernel: [ 4687.199007] usb 1-3: new high speed USB device using ehci_hcd and address 5 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344035] usb 1-3: configuration #1 chosen from 1 choice Jan 6 21:09:59 MAYHEM kernel: [ 4687.344743] scsi6 : SCSI emulation for USB Mass Storage devices Jan 6 21:09:59 MAYHEM kernel: [ 4687.344925] usb 1-3: New USB device found, idVendor=0a17, idProduct=006e Jan 6 21:09:59 MAYHEM kernel: [ 4687.344928] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344929] usb 1-3: Product: K10D Jan 6 21:09:59 MAYHEM kernel: [ 4687.344931] usb 1-3: Manufacturer: PENTAX Corporation Jan 6 21:09:59 MAYHEM kernel: [ 4687.344953] usb-storage: device found at 5 Jan 6 21:09:59 MAYHEM kernel: [ 4687.344954] usb-storage: waiting for device to settle before scanning Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.642283] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial'). Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.705227] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_if0'). Jan 6 21:09:59 MAYHEM NetworkManager: <debug> [1231272599.727031] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_6e_noserial_usbraw'). Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] usb-storage: device scan complete Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] scsi scan: INQUIRY result too short (5), using 36 Jan 6 21:10:04 MAYHEM kernel: [ 4693.196484] scsi 6:0:0:0: Direct-Access PENTAX DIGITAL_CAMERA 1.00 PQ: 0 ANSI: 0 Jan 6 21:10:04 MAYHEM kernel: [ 4693.216289] sd 6:0:0:0: [sdb] 4019201 512-byte hardware sectors (2058 M
Poste le Tuesday 6 January 2009 21:20:52
Re: APN non reconnu sous Debian
Envoyé par:
nicola
C’est clair, cela se passe dans /dev/sdb. Si tu n’as pas les périphériques, tu peux le créer avec /dev/MAKEDEV (oui, c’est un exécutable).
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
Poste le Wednesday 7 January 2009 13:20:45
Re: APN non reconnu sous Debian
Envoyé par:
Basile STARYNKEVITCH
Citation
nicola
C’est clair, cela se passe dans /dev/sdb. Si tu n’as pas les périphériques, tu peux le créer avec /dev/MAKEDEV (oui, c’est un exécutable).
Oui, sauf si un udev tourne sur la machine (ce qui est le cas sur beaucoup de distributions récentes). Il faut alors le configurer sous /etc/udev/ Voir aussi hald
----
Basile STARYNKEVITCH
Membre de l'APRIL « promouvoir et défendre le logiciel libre » - adhérez vous aussi à l'APRIL!
Projet logiciel libre: RefPerSys
Poste le Wednesday 7 January 2009 13:55:34
Page: 1 sur 2
Ce forum !
APN non reconnu sous Debian
Vous voulez savoir si votre matériel est supporté par Linux, ou vous avez un problème pour installer un module ? Ce forum est pour vous !
Nouveau sujet sur ce forum
Sauf mention contraire, les documentations publiées sont sous licence Creative-Commons