Conversation
precedente ou
suivante
démarrage difficile
Envoyé par:
stiXlaw
Bonjour à tous,
Depuis peu mon démarrage ne dépasse pas le stade du premier écran avec le logo de la machine (HP en l'occurence), je n'ai même pas accès au bios. La led du disque dur s'allume puis s'éteind puis plus rien. Parfois si j'attends longtemps le boot continue, mais l'usb ne fonctionne plus. Dans le cas ou ça freeze pour de bon je ne peu faire qu'un hardreboot.
Je cherche des pistes.
Matos : laptop HP nx6110
Distri : 64Studio (debian like)
PL
Depuis peu mon démarrage ne dépasse pas le stade du premier écran avec le logo de la machine (HP en l'occurence), je n'ai même pas accès au bios. La led du disque dur s'allume puis s'éteind puis plus rien. Parfois si j'attends longtemps le boot continue, mais l'usb ne fonctionne plus. Dans le cas ou ça freeze pour de bon je ne peu faire qu'un hardreboot.
Je cherche des pistes.
Matos : laptop HP nx6110
Distri : 64Studio (debian like)
PL
Poste le Friday 28 September 2007 22:09:28
Re: démarrage difficile
Envoyé par:
tellmewhy
Bonsoir stiXlaw,
pour cerner le problème tu trouveras cet article très intéressant :
[fr.wikipedia.org]
tu y verras entre autres en fin de page ce lien :
[www.geocities.com]
ceci devrait te permettre de pouvoir donner plus de précisions quand au moment de ta panne.
Vois-tu au démarrage le nom de ta carte graphique s'inscrire à l'écran ?
Vois-tu au démarrage la liste de tes disques durs ?
As-tu par exemple essayé de débrancher tes disques durs et de démarrer sur un live-cd ?
pour cerner le problème tu trouveras cet article très intéressant :
[fr.wikipedia.org]
tu y verras entre autres en fin de page ce lien :
[www.geocities.com]
ceci devrait te permettre de pouvoir donner plus de précisions quand au moment de ta panne.
Vois-tu au démarrage le nom de ta carte graphique s'inscrire à l'écran ?
Vois-tu au démarrage la liste de tes disques durs ?
As-tu par exemple essayé de débrancher tes disques durs et de démarrer sur un live-cd ?
Poste le Saturday 29 September 2007 02:32:10
Re: démarrage difficile
Envoyé par:
stiXlaw
Tout d'abord je prècise bien que cette panne est très fréquente mais pas certaine. Par exemple ce matin j'ai booté sans problème. Enfin si il me manque un périph usb à l'arrivé, il s'agit d'une carte son reconnue par lsusb mais non accessible par alsa (et qjackctl). Hier soir j'ai pu faire un memtest et sur 2 pass aucunes erreurs ne sont apparues. Dans tous les cas avec plusieurs hard reboot et un peu de patience il se lance.
>>>Vois-tu au démarrage le nom de ta carte graphique s'inscrire à l'écran ?
Non mais de toute façon je n'ai jamais rien vu. Le premier écran HP glissant directement sur Grub et le choix des kernels.
>>>Vois-tu au démarrage la liste de tes disques durs ?
Même réponse que précédement.
>>>As-tu par exemple essayé de débrancher tes disques durs et de démarrer sur un live-cd ?
Je vais tester ça de façon plus approfondie
Pour les pages sur le bios je comprends le fonctionnement et la chronologie mais comme rien n'apparait à l'écran je ne sais pas situer l'erreur.
Est-ce qu'il existe des outils permettant de tester les futures défaillances d'un disque dur, il me semble avoir entendu parler d'un outil comme smartctl, un truc dans le genre.
PL
>>>Vois-tu au démarrage le nom de ta carte graphique s'inscrire à l'écran ?
Non mais de toute façon je n'ai jamais rien vu. Le premier écran HP glissant directement sur Grub et le choix des kernels.
>>>Vois-tu au démarrage la liste de tes disques durs ?
Même réponse que précédement.
>>>As-tu par exemple essayé de débrancher tes disques durs et de démarrer sur un live-cd ?
Je vais tester ça de façon plus approfondie
Pour les pages sur le bios je comprends le fonctionnement et la chronologie mais comme rien n'apparait à l'écran je ne sais pas situer l'erreur.
Est-ce qu'il existe des outils permettant de tester les futures défaillances d'un disque dur, il me semble avoir entendu parler d'un outil comme smartctl, un truc dans le genre.
PL
Poste le Saturday 29 September 2007 10:03:40
Re: démarrage difficile
Envoyé par:
tellmewhy
Bonjour stiXlaw,
cela fait partie du paquet smartmontools, pour plus de détails :
Source :
[forum.ubuntu-fr.org]
Pour ton test de mémoire, normalement il faut le faire pendant plusieurs heures, voir toute une nuit.
As-tu un moyen de désactiver cette page d'acceuil de HP afin d'avoir accés aux informations essentielles ?
N'as-tu pas des indications sur la manière de désactiver cet écran dans le manuel du fabricant ?
As-tu également essayé de débrancher tous tes périphériques usb ?
As-tu essayé de voir dans dmesg si il y avait des problèmes de signalés ?
Une mine d'or (le trésor de cep) : [www.cepcasa.info]
Citation
il me semble avoir entendu parler d'un outil comme smartctl, un truc dans le genre.
cela fait partie du paquet smartmontools, pour plus de détails :
aptitude show smartmontools
Source :
[forum.ubuntu-fr.org]
Pour ton test de mémoire, normalement il faut le faire pendant plusieurs heures, voir toute une nuit.
As-tu un moyen de désactiver cette page d'acceuil de HP afin d'avoir accés aux informations essentielles ?
N'as-tu pas des indications sur la manière de désactiver cet écran dans le manuel du fabricant ?
As-tu également essayé de débrancher tous tes périphériques usb ?
As-tu essayé de voir dans dmesg si il y avait des problèmes de signalés ?
Une mine d'or (le trésor de cep) : [www.cepcasa.info]
Poste le Saturday 29 September 2007 14:30:23
Re: démarrage difficile
Envoyé par:
stiXlaw
Merci tellmewhy (
En attendant j'ai put me balader dans le bios et j'y ai trouvé quelques outils comme un HDD Self Test qui si j'ai bien compris teste le disque dur le résultat est : Test1 (Quick) succeeded, Test2 (Comprehensive) succeded, Test3 (S.M.A.R.T.) succeeded.
Un autre outil Check Memory me donne Memory Test Passed
Par exemple aujourd'hui j'ai lancé le boot c'est resté bloqué 5min puis ça a démarré, mais je n'ai pas d'usb. J'arrive même à bloqué lsusb!
C'est un peu long mais je te mets à la suite le dmesg de mon dernier boot :
Linux version 2.6.21-1-multimedia-486 (Debian 2.6.21-2) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT RT Fri Jun 22 19:13:23 UTC 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000002f6d0000 end: 000000002f7d0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000002f7d0000 size: 000000000001fc00 end: 000000002f7efc00 type: 2
copy_e820_map() start: 000000002f7efc00 size: 000000000000b400 end: 000000002f7fb000 type: 4
copy_e820_map() start: 000000002f7fb000 size: 0000000000005000 end: 000000002f800000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000002000 end: 00000000fec02000 type: 2
copy_e820_map() start: 00000000fed20000 size: 000000000007b000 end: 00000000fed9b000 type: 2
copy_e820_map() start: 00000000feda0000 size: 0000000000020000 end: 00000000fedc0000 type: 2
copy_e820_map() start: 00000000ffb00000 size: 0000000000100000 end: 00000000ffc00000 type: 2
copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002f7d0000 (usable)
BIOS-e820: 000000002f7d0000 - 000000002f7efc00 (reserved)
BIOS-e820: 000000002f7efc00 - 000000002f7fb000 (ACPI NVS)
BIOS-e820: 000000002f7fb000 - 000000002f800000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
759MB LOWMEM available.
Entering add_active_range(0, 0, 194512) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 194512
HighMem 194512 -> 194512
early_node_map[1] active PFN ranges
0: 0 -> 194512
On node 0 totalpages: 194512
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4040 pages, LIFO batch:0
Normal zone: 2603 pages used for memmap
Normal zone: 187813 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000FE270, 0014 (r0 HP )
ACPI: RSDT 2F7EFC84, 0034 (r1 HP 099C 21120420 HP 1)
ACPI: FACP 2F7EFC00, 0084 (r2 HP 099C 2 HP 1)
ACPI: DSDT 2F7EFD50, 775C (r1 HP DAU00 10000 MSFT 100000E)
ACPI: FACS 2F7FAE80, 0040
ACPI: APIC 2F7EFCB8, 005A (r1 HP 099C 1 HP 1)
ACPI: MCFG 2F7EFD14, 003C (r1 HP 099C 1 HP 1)
ACPI: SSDT 2F7F74AC, 0371 (r1 HP HPQPpc 1001 MSFT 100000E)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfec01000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 2f800000:b0800000)
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists. Total pages: 191853
Kernel command line: root=/dev/hda1 ro vga=791 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fec01000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 800.120 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 756888k/778048k available (1720k kernel code, 20548k reserved, 680k data, 308k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 k
pkmap : 0xff800000 - 0xffc00000 (4096 k
vmalloc : 0xf0000000 - 0xff7fe000 ( 247 M
lowmem : 0xc0000000 - 0xef7d0000 ( 759 M
.init : 0xc035f000 - 0xc03ac000 ( 308 k
.data : 0xc02ae041 - 0xc03580d4 ( 680 k
.text : 0xc0100000 - 0xc02ae041 (1720 k
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1601.44 BogoMIPS (lpj=800722)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
Total of 1 processors activated (1601.44 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
Force enabled HPET at base address 0xfed00000
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH6 GPIO
PCI: Enabled ICH6/i801 SMBus device
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C067._PRT]
ACPI: PCI Interrupt Link [C0D7] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0D8] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0ED] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0EE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0EF] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
ACPI: Power Resource [C1BD] (on)
ACPI: Power Resource [C24F] (off)
ACPI: Power Resource [C250] (off)
ACPI: Power Resource [C251] (off)
ACPI: Power Resource [C252] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x2f7fffff could not be reserved
pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:09: ioport range 0x1000-0x107f has been reserved
pnp: 00:09: ioport range 0x1100-0x113f has been reserved
pnp: 00:09: ioport range 0x1200-0x121f has been reserved
pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:09: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:09: iomem range 0xfed20000-0xff41ffff could not be reserved
pnp: 00:09: iomem range 0xfed90000-0xfed9afff could not be reserved
pnp: 00:0a: iomem range 0xfeda0000-0xfedbffff could not be reserved
pnp: 00:0a: iomem range 0xfec01000-0xfec01fff could not be reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 30000000-33ffffff
MEM window: 34000000-37ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: d0000000-d03fffff
PREFETCH window: 30000000-33ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2883584 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs...<6>Switched to NOHz mode on CPU #0
it is
Freeing initrd memory: 5511k freed
audit: initializing netlink socket (disabled)
audit(1191137212.233:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xc0000000, mapped to 0xf0080000, using 6144k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82817 bytes,<6>...found (1024x768, 67122 bytes, v3).
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:C1BA,PNP0f13:C1BB] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 7
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 308k freed
input: AT Translated Set 2 keyboard as /class/input/input0
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: Transitioning device [C253] to D3
ACPI: Transitioning device [C253] to D3
ACPI: Fan [C253] (off)
ACPI: Transitioning device [C254] to D3
ACPI: Transitioning device [C254] to D3
ACPI: Fan [C254] (off)
ACPI: Transitioning device [C255] to D3
ACPI: Transitioning device [C255] to D3
ACPI: Fan [C255] (off)
ACPI: Transitioning device [C256] to D3
ACPI: Transitioning device [C256] to D3
ACPI: Fan [C256] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (46 C)
ACPI: Thermal Zone [TZ2] (28 C)
ACPI: Thermal Zone [TZ3] (19 C)
usbcore: registered new interface driver usbfs
SCSI subsystem initialized
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 2.20 loaded.
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
USB Universal Host Controller Interface driver v3.0
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd0580000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Clocksource tsc unstable (delta = -105141994 ns)
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
b44.c:v1.01 (Jun 16, 2006)
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 18
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:79:c1:85:ae
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
usb usb2: Controller not stopped yet!
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d0003000-d00037ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 18
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2580-0x2587, BIOS settings: hda
MA, hdbMA
Probing IDE interface ide0...
hda: ST94011A, ATA DISK drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[718b5000297510a6]
hdb: SONY CD-RW/DVD-ROM CRX835E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00002060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
hda: max request size: 512KiB
hda: 78140160 sectors (40007 M w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid5: measuring checksumming speed
8regs : 1504.000 MB/sec
8regs_prefetch: 1392.000 MB/sec
32regs : 924.000 MB/sec
32regs_prefetch: 872.000 MB/sec
raid5: using function: 8regs (1504.000 MB/sec)
raid6: int32x1 257 MB/s
raid6: int32x2 300 MB/s
raid6: int32x4 250 MB/s
raid6: int32x8 203 MB/s
raid6: mmxx1 738 MB/s
raid6: mmxx2 894 MB/s
raid6: sse1x1 660 MB/s
raid6: sse1x2 933 MB/s
raid6: sse2x1 1062 MB/s
raid6: sse2x2 1144 MB/s
raid6: using algorithm sse2x2 (1144 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 19
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
Serial: 8250/16550 driver $Revision: 1.90 $ 10 ports, IRQ sharing enabled
agpgart: AGP aperture is 256M @ 0xc0000000
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Yenta: CardBus bridge found at 0000:02:06.0 [103c:099c]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
bcm43xx driver
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:1e.3 -> GSI 22 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1e.2 to 64
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ALSA /usr/src/modules/alsa-driver/pci/ac97/ac97_codec.c:2118: AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50250 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1e.3 -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1e.3 to 64
Adding 722884k swap on /dev/hda5. Priority:-1 extents:1 across:722884k
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see [www.kernel.org] for details.
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 5 changed to on
ACPI: Battery Slot [C16D] (battery present)
ACPI: Battery Slot [C16C] (battery absent)
ACPI: AC Adapter [C16B] (off-line)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [C1E0]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [C1E1]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
tsdev (compaq touchscreen emulation) is scheduled for removal.
See Documentation/feature-removal-schedule.txt for details.
bcm43xx: PHY connected
Capability LSM initialized
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
b44: eth2: Link is up at 100 Mbps, full duplex.
b44: eth2: Flow control is off for TX and off for RX.
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18
[drm] Initialized i915 1.6.0 20060119 on minor 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
eth2: no IPv6 routers present
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
usb 1-2: new high speed USB device using ehci_hcd and address 2
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
Désolé c'est Énorme...
stiXlaw
En attendant j'ai put me balader dans le bios et j'y ai trouvé quelques outils comme un HDD Self Test qui si j'ai bien compris teste le disque dur le résultat est : Test1 (Quick) succeeded, Test2 (Comprehensive) succeded, Test3 (S.M.A.R.T.) succeeded.
Un autre outil Check Memory me donne Memory Test Passed
Par exemple aujourd'hui j'ai lancé le boot c'est resté bloqué 5min puis ça a démarré, mais je n'ai pas d'usb. J'arrive même à bloqué lsusb!
C'est un peu long mais je te mets à la suite le dmesg de mon dernier boot :
Linux version 2.6.21-1-multimedia-486 (Debian 2.6.21-2) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT RT Fri Jun 22 19:13:23 UTC 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000002f6d0000 end: 000000002f7d0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000002f7d0000 size: 000000000001fc00 end: 000000002f7efc00 type: 2
copy_e820_map() start: 000000002f7efc00 size: 000000000000b400 end: 000000002f7fb000 type: 4
copy_e820_map() start: 000000002f7fb000 size: 0000000000005000 end: 000000002f800000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000002000 end: 00000000fec02000 type: 2
copy_e820_map() start: 00000000fed20000 size: 000000000007b000 end: 00000000fed9b000 type: 2
copy_e820_map() start: 00000000feda0000 size: 0000000000020000 end: 00000000fedc0000 type: 2
copy_e820_map() start: 00000000ffb00000 size: 0000000000100000 end: 00000000ffc00000 type: 2
copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002f7d0000 (usable)
BIOS-e820: 000000002f7d0000 - 000000002f7efc00 (reserved)
BIOS-e820: 000000002f7efc00 - 000000002f7fb000 (ACPI NVS)
BIOS-e820: 000000002f7fb000 - 000000002f800000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
759MB LOWMEM available.
Entering add_active_range(0, 0, 194512) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 194512
HighMem 194512 -> 194512
early_node_map[1] active PFN ranges
0: 0 -> 194512
On node 0 totalpages: 194512
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4040 pages, LIFO batch:0
Normal zone: 2603 pages used for memmap
Normal zone: 187813 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000FE270, 0014 (r0 HP )
ACPI: RSDT 2F7EFC84, 0034 (r1 HP 099C 21120420 HP 1)
ACPI: FACP 2F7EFC00, 0084 (r2 HP 099C 2 HP 1)
ACPI: DSDT 2F7EFD50, 775C (r1 HP DAU00 10000 MSFT 100000E)
ACPI: FACS 2F7FAE80, 0040
ACPI: APIC 2F7EFCB8, 005A (r1 HP 099C 1 HP 1)
ACPI: MCFG 2F7EFD14, 003C (r1 HP 099C 1 HP 1)
ACPI: SSDT 2F7F74AC, 0371 (r1 HP HPQPpc 1001 MSFT 100000E)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfec01000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 2f800000:b0800000)
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists. Total pages: 191853
Kernel command line: root=/dev/hda1 ro vga=791 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fec01000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 800.120 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 756888k/778048k available (1720k kernel code, 20548k reserved, 680k data, 308k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 k
pkmap : 0xff800000 - 0xffc00000 (4096 k
vmalloc : 0xf0000000 - 0xff7fe000 ( 247 M
lowmem : 0xc0000000 - 0xef7d0000 ( 759 M
.init : 0xc035f000 - 0xc03ac000 ( 308 k
.data : 0xc02ae041 - 0xc03580d4 ( 680 k
.text : 0xc0100000 - 0xc02ae041 (1720 k
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1601.44 BogoMIPS (lpj=800722)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
Total of 1 processors activated (1601.44 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
Force enabled HPET at base address 0xfed00000
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH6 GPIO
PCI: Enabled ICH6/i801 SMBus device
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C067._PRT]
ACPI: PCI Interrupt Link [C0D7] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0D8] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0ED] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0EE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0EF] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
ACPI: Power Resource [C1BD] (on)
ACPI: Power Resource [C24F] (off)
ACPI: Power Resource [C250] (off)
ACPI: Power Resource [C251] (off)
ACPI: Power Resource [C252] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x2f7fffff could not be reserved
pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:09: ioport range 0x1000-0x107f has been reserved
pnp: 00:09: ioport range 0x1100-0x113f has been reserved
pnp: 00:09: ioport range 0x1200-0x121f has been reserved
pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:09: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:09: iomem range 0xfed20000-0xff41ffff could not be reserved
pnp: 00:09: iomem range 0xfed90000-0xfed9afff could not be reserved
pnp: 00:0a: iomem range 0xfeda0000-0xfedbffff could not be reserved
pnp: 00:0a: iomem range 0xfec01000-0xfec01fff could not be reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 30000000-33ffffff
MEM window: 34000000-37ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: d0000000-d03fffff
PREFETCH window: 30000000-33ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2883584 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs...<6>Switched to NOHz mode on CPU #0
it is
Freeing initrd memory: 5511k freed
audit: initializing netlink socket (disabled)
audit(1191137212.233:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xc0000000, mapped to 0xf0080000, using 6144k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82817 bytes,<6>...found (1024x768, 67122 bytes, v3).
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:C1BA,PNP0f13:C1BB] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 7
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 308k freed
input: AT Translated Set 2 keyboard as /class/input/input0
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: Transitioning device [C253] to D3
ACPI: Transitioning device [C253] to D3
ACPI: Fan [C253] (off)
ACPI: Transitioning device [C254] to D3
ACPI: Transitioning device [C254] to D3
ACPI: Fan [C254] (off)
ACPI: Transitioning device [C255] to D3
ACPI: Transitioning device [C255] to D3
ACPI: Fan [C255] (off)
ACPI: Transitioning device [C256] to D3
ACPI: Transitioning device [C256] to D3
ACPI: Fan [C256] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (46 C)
ACPI: Thermal Zone [TZ2] (28 C)
ACPI: Thermal Zone [TZ3] (19 C)
usbcore: registered new interface driver usbfs
SCSI subsystem initialized
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 2.20 loaded.
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
USB Universal Host Controller Interface driver v3.0
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd0580000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Clocksource tsc unstable (delta = -105141994 ns)
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
b44.c:v1.01 (Jun 16, 2006)
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 18
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:79:c1:85:ae
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
usb usb2: Controller not stopped yet!
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d0003000-d00037ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 18
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2580-0x2587, BIOS settings: hda
MA, hdbMA
Probing IDE interface ide0...
hda: ST94011A, ATA DISK drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[718b5000297510a6]
hdb: SONY CD-RW/DVD-ROM CRX835E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00002060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
hda: max request size: 512KiB
hda: 78140160 sectors (40007 M
w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid5: measuring checksumming speed
8regs : 1504.000 MB/sec
8regs_prefetch: 1392.000 MB/sec
32regs : 924.000 MB/sec
32regs_prefetch: 872.000 MB/sec
raid5: using function: 8regs (1504.000 MB/sec)
raid6: int32x1 257 MB/s
raid6: int32x2 300 MB/s
raid6: int32x4 250 MB/s
raid6: int32x8 203 MB/s
raid6: mmxx1 738 MB/s
raid6: mmxx2 894 MB/s
raid6: sse1x1 660 MB/s
raid6: sse1x2 933 MB/s
raid6: sse2x1 1062 MB/s
raid6: sse2x2 1144 MB/s
raid6: using algorithm sse2x2 (1144 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 19
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
Serial: 8250/16550 driver $Revision: 1.90 $ 10 ports, IRQ sharing enabled
agpgart: AGP aperture is 256M @ 0xc0000000
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Yenta: CardBus bridge found at 0000:02:06.0 [103c:099c]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
bcm43xx driver
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:1e.3 -> GSI 22 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1e.2 to 64
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ALSA /usr/src/modules/alsa-driver/pci/ac97/ac97_codec.c:2118: AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50250 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1e.3 -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1e.3 to 64
Adding 722884k swap on /dev/hda5. Priority:-1 extents:1 across:722884k
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see [www.kernel.org] for details.
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3).
bootsplash: status on console 5 changed to on
ACPI: Battery Slot [C16D] (battery present)
ACPI: Battery Slot [C16C] (battery absent)
ACPI: AC Adapter [C16B] (off-line)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [C1E0]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [C1E1]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
tsdev (compaq touchscreen emulation) is scheduled for removal.
See Documentation/feature-removal-schedule.txt for details.
bcm43xx: PHY connected
Capability LSM initialized
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
b44: eth2: Link is up at 100 Mbps, full duplex.
b44: eth2: Flow control is off for TX and off for RX.
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18
[drm] Initialized i915 1.6.0 20060119 on minor 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
eth2: no IPv6 routers present
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
usb 1-2: new high speed USB device using ehci_hcd and address 2
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
Désolé c'est Énorme...
stiXlaw
Poste le Sunday 30 September 2007 10:14:17
Re: démarrage difficile
Envoyé par:
nicola
Quand c’est gros comme ça, la balise code permet de rendre le pavé moins indigeste.
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
Poste le Sunday 30 September 2007 10:47:49
Re: démarrage difficile
Envoyé par:
Basile STARYNKEVITCH
Citation
stixlaw
C'est un peu long mais je te mets à la suite le dmesg de mon dernier boot :bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
A mon avis, il manque le bon fichier bcm43xx_microcode5.fw dans /lib/firmware/ (mais je ne sais pas où trouver ce fichier).
----
Basile STARYNKEVITCH
Membre de l'APRIL « promouvoir et défendre le logiciel libre » - adhérez vous aussi à l'APRIL!
Projet logiciel libre: RefPerSys
Poste le Sunday 30 September 2007 13:22:52
Re: démarrage difficile
Envoyé par:
tellmewhy
Bonjour à tous, :-)
Effectivement comme le dit Basile STARYNKEVITCH il te manque le bon fichier.
Voici quelques liens qui traitent du sujet :
[forum.debian-fr.org]
[doc.ubuntu-fr.org]
[people.debian.org]
[www.queret.net]
Effectivement comme le dit Basile STARYNKEVITCH il te manque le bon fichier.
Voici quelques liens qui traitent du sujet :
[forum.debian-fr.org]
[doc.ubuntu-fr.org]
[people.debian.org]
[www.queret.net]
Poste le Sunday 30 September 2007 14:34:15
Re: démarrage difficile
Envoyé par:
stiXlaw
Oui je le savais déjà, je savais que l'extraction du microcode bcm43 ne se passait pas sans douleur. Je vais voir les adresses données.
Mais je pensais que c'était hors sujet avec ma panne de boot. Car il me semblait que le microcode était extrait bien plutard que le freeze.
Je reviens.
stiXlaw
Mais je pensais que c'était hors sujet avec ma panne de boot. Car il me semblait que le microcode était extrait bien plutard que le freeze.
Je reviens.
stiXlaw
Poste le Sunday 30 September 2007 16:51:36
Re: démarrage difficile
Envoyé par:
tellmewhy
Bonjour stiXlaw , :-)
Tu peux également vérifier dans /var/log/fsck et afficher le contenu de checkfs et checkroot avec cat.
Le problème entre autres est que ton bootsplash ne permet pas de voir les informations essentielles.
Essayes d'appuyer sur Alt + F1 après le choix de Grub, normalement tu devrais basculer dans un terminal plus loquace.
Si tu es en ext3, et dans un premier temps, juste pour voir, tu peux démarrer sur un live-cd, et dans une console
Là je ne te fais pas utiliser l'option de réparation automatique -y, car il s'agit de savoir si tu as des problèmes avec ton système de fichiers et non pas de les résoudre.
Par contre si tu as des problèmes avec ton système de fichiers, tu comprendras tout de suite l'utilité en temps normal de -y. :-))
Certains live-cd montent automatiquement les partitions, tu dois bien sûr t'assurer que ce ne soit pas le cas, sinon il faudra d'abord démonter la partition.
Tu aurais de toute manière, le cas échéant, un message d'avertissement de e2fsck.
Tu peux également vérifier dans /var/log/fsck et afficher le contenu de checkfs et checkroot avec cat.
Le problème entre autres est que ton bootsplash ne permet pas de voir les informations essentielles.
Essayes d'appuyer sur Alt + F1 après le choix de Grub, normalement tu devrais basculer dans un terminal plus loquace.
Si tu es en ext3, et dans un premier temps, juste pour voir, tu peux démarrer sur un live-cd, et dans une console
sudo e2fsck -f /dev/ta_partition(si tu n'utilises pas sudo, remplaces par su)
Là je ne te fais pas utiliser l'option de réparation automatique -y, car il s'agit de savoir si tu as des problèmes avec ton système de fichiers et non pas de les résoudre.
Par contre si tu as des problèmes avec ton système de fichiers, tu comprendras tout de suite l'utilité en temps normal de -y. :-))
Certains live-cd montent automatiquement les partitions, tu dois bien sûr t'assurer que ce ne soit pas le cas, sinon il faudra d'abord démonter la partition.
Tu aurais de toute manière, le cas échéant, un message d'avertissement de e2fsck.
Poste le Sunday 30 September 2007 17:14:14
Re: démarrage difficile
Envoyé par:
stiXlaw
En discutant sur un autre forum on me suggère plutot de regarder vers la carte mère. Le défaut du port usb notament indiquerai une défaillance des controleurs.
Comment connaitre le modèle de la cm ? Avez vous déjà été confronté a ce problème sur un laptop ? Coût de l'opération ?
stiXlaw
Comment connaitre le modèle de la cm ? Avez vous déjà été confronté a ce problème sur un laptop ? Coût de l'opération ?
stiXlaw
Poste le Sunday 30 September 2007 21:00:09
Re: démarrage difficile
Envoyé par:
tellmewhy
Bonsoir stiXlaw,
le paquet lshw te permet d'obtenir des informations très complètes sur ton matériel.
Tu devrais aussi taper la référence complète de ton matériel dans la barre de recherche de Google pour obtenir plus d'informations et voir si il s'agit d'un problème récurrent.
le paquet lshw te permet d'obtenir des informations très complètes sur ton matériel.
aptitude search lshw sudo aptitude install lshw sudo lshw
Tu devrais aussi taper la référence complète de ton matériel dans la barre de recherche de Google pour obtenir plus d'informations et voir si il s'agit d'un problème récurrent.
Poste le Sunday 30 September 2007 21:12:00
Re: démarrage difficile
Envoyé par:
stiXlaw
Interessant ce lshw.
Voilà pour la carte mère :
description: Motherboard
product: 3088
vendor: Hewlett-Packard
physical id: 0
version: KBC Version 39.17
Mais google (mon ami) ne me donne pas trop d'indication sur d'éventuelle pannes récurentes.
Je continue à chercher.
Voilà pour la carte mère :
description: Motherboard
product: 3088
vendor: Hewlett-Packard
physical id: 0
version: KBC Version 39.17
Mais google (mon ami) ne me donne pas trop d'indication sur d'éventuelle pannes récurentes.
Je continue à chercher.
Poste le Sunday 30 September 2007 21:34:49
Re: démarrage difficile
Envoyé par:
tellmewhy
Bonsoir stiXlaw,
tu peux toujours essayer de désactiver l'écran pour avoir accès à plus d'informations,
un lien sur le sujet :
[www.commentcamarche.net]
Ensuite concernant ton problème de démarrage, tapes "problème boot hp" dans la barre de recherche Google.
Il n'est pas possible pour moi d'en faire la synthèse. Tu pourras plus facilement faire le tri et voir les cas qui se rapportent à ton souci.
Je sais que c'est une réponse idiote, mais le plus simple serait tout de même de contacter le fabricant.
Il sera mieux à même de t'indiquer ce qui peut être la cause de ton souci avec les descriptions que tu lui feras.
Si tu es encore sous garantie ce serait le plus sage.
tu peux toujours essayer de désactiver l'écran pour avoir accès à plus d'informations,
un lien sur le sujet :
[www.commentcamarche.net]
Ensuite concernant ton problème de démarrage, tapes "problème boot hp" dans la barre de recherche Google.
Il n'est pas possible pour moi d'en faire la synthèse. Tu pourras plus facilement faire le tri et voir les cas qui se rapportent à ton souci.
Je sais que c'est une réponse idiote, mais le plus simple serait tout de même de contacter le fabricant.
Il sera mieux à même de t'indiquer ce qui peut être la cause de ton souci avec les descriptions que tu lui feras.
Si tu es encore sous garantie ce serait le plus sage.
Poste le Sunday 30 September 2007 23:48:19
Re: démarrage difficile
Envoyé par:
Vincent-Xavier JUMEL
Citation
anesanes
Bonjour à tous,
j'ai un hp NX6110 et j'ai les meme problèmes que
les votres,pouviez-vous s'il vous plais
m'aider?(mon système d'exploitation est win xp pro
aves ses dernières mise à jours)
On est pas le premier avril, et le site ne contient ni Microsoft, ni Windows, ni XP dans son titre !
C'est en forgeant qu'on devient forgeron, et c'est en sciant que Léonard De Vinci !
Mon site perso
Poste le Friday 30 May 2008 00:22:39
Re: démarrage difficile
Envoyé par:
nicola
Et en plus, un beau cadre rose indique qu'il ne faut pas écrire en poney.
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-
Poste le Friday 30 May 2008 20:29:09
Ce forum !
démarrage difficile
Vous voulez savoir si votre matériel est supporté par Linux, ou vous avez un problème pour installer un module ? Ce forum est pour vous !
Sauf mention contraire, les documentations publiées sont sous licence Creative-Commons