Vérifie qu'il est bien reconnu par sane; dans une console en root:

sane-find-scanner -v

Poste le Tuesday 5 September 2006 23:20:56

Bonjour,

Même problème avec le Scanner Canon D1250U2, alors que le scanner Canon N650U fonctionne ?

Logiciel Utilisé : XSane 0.97 sous Linux Mandriva 2006


Lancement en mode root :

sane-find-scanner -v

[root@localhost sav]# sane-find-scanner -v
This is sane-find-scanner from sane-backends 1.0.16

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a SCSI driver for your SCSI adapter.

searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
found USB scanner (vendor=0x046d, product=0x0870 [Camera]) at libusb:002:004
found USB scanner (vendor=0x04a9 [Canon], product=0x2206 [CanoScan], chip=LM9832/3) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
done

Poste le Wednesday 6 September 2006 15:59:01

Ref pingus : merci pour l'info

Ref arnold : J'ai les mêmes messages que toi ce qui veut dire que ton scanner est reconnu par le port usb mais qu'il n'est pas installé entièrement.
Il faut surement installer le firmare dans usr/share/gt68xx/nom du firmare. j'ai essayé bien sur mais ca ne marcha pas toujours. en fait je ne sais pas quel est le firmare parmi les fichiers qui se trouvent dans le cd d'installation j'ai :
gt680x
gtPs2D
ps2Dfw.usb
PS2DNB.usb
PS2DUSD
Ayant mis le 3ème de la liste ça n'a pas fonctionné pourtant Xsane reconnait le nom de mon scanner...Finalament j'ai fait une erreur de manip et je crois que je dois tout reinstaller. Windows c'est plus simple je peux scanner, photocopier, envoyer des fax, des emails sans rien parametrer.
si j'arrive à le faire marcher je te donne des nouvelles ainsi que l'adresse d'un tutos ( que j'ai perdue) où l'instal d'un scanner est expliquée.

Poste le Thursday 7 September 2006 15:18:45

Est-ce que Xsane fonctionne lorsque vous lancez une session X sous root ?

Poste le Friday 8 September 2006 22:57:02

en fait j'ai résolu le problème: tout marche ! J'avais mis un mauvais firmware en fait. Ouf!

Poste le Saturday 9 September 2006 11:52:23

ply, peux-tu donner le contenu du fichier /etc/fstab ?

Poste le Saturday 9 September 2006 16:41:12