Salut,
Ma réponse est simple, comme sur un disque normal
:-D

Euh, plus concrètement, tu as essayé ? En principe les distros récentes gèrent bien le SATA. Tu as des messages d'erreur ?

Poste le Sunday 30 July 2006 22:13:27

Ah mince ecxcuse moi j'ai lu ton message en diagonale, je n'avais pas vu que tu voulais faire du RAID 0
Tu veux installer quelle distribution ?

Poste le Sunday 30 July 2006 22:14:47

Je voudrais installer Mandriva (ou mandrake comme tu veux c'est les même)
Mais il n'arrive pas à installer le pilote pour mon nForce4

Car j'ai déjàs essayer Mandriva 2006

Peut être connais-tu une distrib plus sérieuse....

PS: pourquoi je suis pas notifier par email des nouveaux messages sur le forum?

[nico88120.free.fr]

Poste le Wednesday 2 August 2006 21:58:38

Ben ca dépend de ce que tu veux faire... Mandriva est bien pour les débutants, Suse aussi, Ubuntu aussi.
Tu as un RAID matériel visiblement ? Quels disques apparaissent lors de l'installation ? Est-ce que tu vois ton volume RAID ?

Pour la notification par mail, vérifie que la case est bien cochée lorsque tu écris le message, puis vérifie ton adresse mail dans tes préférences...

Poste le Thursday 3 August 2006 09:53:11

Oui c'est bien du raid matériel.

Mandriva trouve mon controleur de disque (Nvidia CK804 i je me souviens bien) c'est un chip nForce4 Mais çà plante durant l'instalation du pilote donc du coup, je ne vois aucun disque.

Voici le message d'erreur:
insmod'ing module sata.nv failed at
/usr/lib/libDrakX/modules.pm line 340

Visiblement il a pas réussi à installer le module dans le noyau...

Je touche pas trop bien ces histoires de module encore...

Ca te parle un peu plus?

Pour la notification par mail j'ai trouvé, une erreur dans mon adresse (quel nul!)

[nico88120.free.fr]

Poste le Thursday 3 August 2006 11:34:21

Hum, je ne sais pas trop quoi te conseiller, là... :-/
Un module c'est ce qui permet d'accèder au matériel (un pilote en gros, c'est tout ce que je sais et encore, j'espère ne pas raconter n'importe quoi)

Désolé mais je ne vois pas comment résoudre ton problème, si ce n'est essayer une autre distribution, au moins pour vérifier que ton contrôleur est bien reconnu par Linux...
Quelqu'un plus doué que moi saura sans doute t'éclairer.
Bon courage

Poste le Thursday 3 August 2006 15:09:47

Ah mince moi qui avait une lueur d'espoir...:-(

[nico88120.free.fr]

Poste le Thursday 3 August 2006 21:44:46

Bon j'avance!
J'ai gravé la version 64 bits de mandriva sur cd et 'ai pu installer linux.
Je pense que mon proble de error insmod'ing venait d'une mauvise gravure.

Bravo les DVD primeon (pour in fo c'est de la second pass du boulot).

Enfin maintenant j'ai un kernel panic donc c'est pas encore tout à fait régler.
d'après ce que j'ai compris, linux n'arrive pas à monter mon système de fichier, étonnant puisqu'il a réussi à enregistré les fichiers sur mon disque lors de l'installation....

[nico88120.free.fr]

Poste le Friday 4 August 2006 22:30:47

Un peu plus de précision...

J'ai tenté la distribution Ubuntu, mais il ne détecte pas mes disques en raid 0. Au lieu de celà, il détecte mes deux disques sans les partitions qui figurent dessus.

J'ai donc réessayer avec un distrib Mandriva 2006 (version 64 bits) sur 3CDs cette fois-ci, j'ai réussi a installer sans souci sur l'espace libre que j'avais réservé pour linux lors de l'install de windows.

Mais un gros soucis persiste. Linux plante au démarrage car il n'arrive pas à monté ma partition root.
Et j'ai le message suivant:
"kernel panic - not syncing: No init found. Try passing init= option to kernel.

J'obtien ce message quelque soit le niveau de lancement de linux:

linux
linux-nonfb (au fait çà sert à quoi)
failsafe

Est-ce que quelqu'un peut m'aider?

[nico88120.free.fr]

Poste le Saturday 5 August 2006 13:39:06

Personne ne peut m'aider?

[nico88120.free.fr]

Poste le Sunday 6 August 2006 22:03:08

Bon! Récapitulons...

L'install se passe bien c'est que déjàs linux peut voir ET utiliser le RAID matériel

Maintenant quand je boot çà plante avec kernel panic... (voir plus haut)

Si je suis suffisament logique (j'espère l'être) çà voudrait dire que mon noyau pré-compilé de Mandriva ne possède pas les modules nécessaire à la reconnaissance du raid,non?

Je pense être obligé de recompilé mon noyau en installant d'abord Linux sur un autre disque dur
D'après ce que j'ai vu ici [forum.ubuntu-fr.org]

Bon c'est pas gagné mais je vais devoir essayé

Je vous tiens au courant, pour ceux que çà interesse

[nico88120.free.fr]

Poste le Sunday 6 August 2006 22:16:27

Bon en installant linux sur un disque IDE j'ai réussis à booter mais je m'aperçoit que mon controleur RAID n'est pas reconnu.

"/dev/mapper/.... n'existe pas"

Voir les logs plus bas.

[nico88120.free.fr]

Poste le Monday 7 August 2006 11:27:08

dmesg


Bootdata ok (command line is root=/dev/hdc6 vga=794)
Linux version 2.6.12-12mdksmp (gb@ramanujan.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 SMP Fri Sep 9 17:20:34 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7560
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003fff9880
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9a80
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff97c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003fff0000
Using 23 for the hash shift. Max adder is 3fff0000
Using node hash shift of 23
Bootmem setup node 0 0000000000000000-000000003fff0000
On node 0 totalpages: 262028
DMA zone: 3996 pages, LIFO batch:1
Normal zone: 258032 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Checking aperture...
CPU 0: aperture @ 1940000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 M
No AGP bridge found
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/hdc6 vga=794
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2010.307 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1024384k/1048512k available (2521k kernel code, 0k reserved, 898k data, 268k init)
Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Node 0 -> Core 0
ACPI: Looking for DSDT in initrd... not found.
Using local APIC timer interrupts.
Detected 12.564 MHz APIC timer.
Booting processor 1/1 rip 6000 rsp ffff810002255f58
Initializing CPU#1
Calibrating delay loop... 4014.08 BogoMIPS (lpj=2007040)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Node 0 -> Core 1
AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
CPU 1: Syncing TSC to CPU 0.
Brought up 2 CPUs
CPU 1: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 525 cycles)
time.c: Using PIT/TSC based timekeeping.
testing NMI watchdog ... OK.
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
domain 1: span 00000003
groups: 00000003
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
domain 1: span 00000003
groups: 00000003
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1154947553.215:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000080000, using 10240k, total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found.
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6Y080L0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 160086528 sectors (81964 M w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hdc: cache flushes supported
/dev/ide/host0/bus1/target0/lun0:hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide1: reset: success
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide1: reset: success
p1 p2 < p5 p6hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide1: reset: success
p7 p8 >
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
ACPI wakeup devices:
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 PS2M PS2K
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
libata version 1.11 loaded.
input: AT Translated Set 2 keyboard on isa0060/serio0
sata_nv version 0.6
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 217
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 217
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
logips2pp: Detected unknown logitech mouse model 66
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 225
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 225
ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata3: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata3: dev 0 configured for UDMA/133
scsi2 : sata_nv
ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata4: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/133
scsi3 : sata_nv
Vendor: ATA Model: ST3808110AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3808110AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 M
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 M
SCSI device sda: drive cache: write back
/dev/scsi/host2/bus0/target0/lun0: p1 p2 < >
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 M
SCSI device sdb: drive cache: write back
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 M
SCSI device sdb: drive cache: write back
/dev/scsi/host3/bus0/target0/lun0: unknown partition table
Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 268k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 233, io mem 0xd3103000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ts: Compaq touchscreen protocol output
ohci_hcd 0000:00:02.0: wakeup
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-2: new full speed USB device using ohci_hcd and address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0704
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
EXT3 FS on hdc6, internal journal
Adding 506008k swap on /dev/hdc7. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ntfs: Ignoring new-style parameters in presence of obsolete ones
NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: loaded (max 8 devices)
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 360 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
floppy0: no floppy controllers found
floppy0: no floppy controllers found
NET: Registered protocol family 17
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 360 bytes per conntrack
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. [snowman.net]
ipt_owner: pid, sid and command matching is broken on SMP.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 50813 usecs
intel8x0: clocking to 46904
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff804125e0(lo)
IPv6 over IPv4 tunneling driver


[nico88120.free.fr]

Poste le Monday 7 August 2006 11:28:59

boot.log


==> append : to filename to view the Palm OS dynamic library data "Aug 7 10:46:12 localhost partm" source
Aug 7 10:46:12 localhost partmon: V
rification de l'espace libre sur les partitions
Aug 7 10:46:12 localhost partmon: ^[[65G[
Aug 7 10:46:12 localhost partmon: ^[[1;32m
Aug 7 10:46:12 localhost partmon:
Aug 7 10:46:12 localhost rc: Lancement de partmon
: succeeded
Aug 7 10:46:12 localhost acpid: D
marrage de acpid succeeded
Aug 7 10:46:12 localhost hplip: D
marrage de hpiod succeeded
Aug 7 10:46:13 localhost hpssd.py: hpssd
Aug 7 10:46:13 localhost hpssd.py: hpssd ^[[01mHP Linux Imaging and Printing System (ver. 0.9.4)^[[0m
Aug 7 10:46:13 localhost hpssd.py: hpssd ^[[01mServices and Status Daemon ver. 5.1^[[0m
Aug 7 10:46:13 localhost hpssd.py: hpssd
Aug 7 10:46:13 localhost hpssd.py: hpssd Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
Aug 7 10:46:13 localhost hpssd.py: hpssd This software comes with ABSOLUTELY NO WARRANTY.
Aug 7 10:46:13 localhost hpssd.py: hpssd This is free software, and you are welcome to distribute it
Aug 7 10:46:13 localhost hpssd.py: hpssd under certain conditions. See COPYING file for more details.
Aug 7 10:46:13 localhost hpssd.py: hpssd
Aug 7 10:46:13 localhost hpssd.py: hpssd
Aug 7 10:46:13 localhost hpssd.py: hpssd ^[[01mHP Linux Imaging and Printing System (ver. 0.9.4)^[[0m
Aug 7 10:46:13 localhost hpssd.py: hpssd ^[[01mServices and Status Daemon ver. 5.1^[[0m
Aug 7 10:46:13 localhost hpssd.py: hpssd
Aug 7 10:46:13 localhost hpssd.py: hpssd Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
Aug 7 10:46:13 localhost hpssd.py: hpssd This software comes with ABSOLUTELY NO WARRANTY.
Aug 7 10:46:13 localhost hpssd.py: hpssd This is free software, and you are welcome to distribute it
Aug 7 10:46:13 localhost hpssd.py: hpssd under certain conditions. See COPYING file for more details.
Aug 7 10:46:13 localhost hpssd.py: hpssd
Aug 7 10:46:14 localhost hplip: D
marrage de hpssd.py succeeded
Aug 7 12:46:00 localhost rc.sysinit: Setting default font (lat0-16): succeeded
Aug 7 12:46:00 localhost rc.sysinit: Montage des syst
mes de fichiers succeeded
Aug 7 12:46:00 localhost rc.sysinit: Montage de sysfs dans /sys succeeded
Aug 7 12:46:00 localhost udev: Lancement de udev succeeded
Aug 7 12:46:00 localhost rc.sysinit: D
montage du RAMdisk initrd
: succeeded
Aug 7 12:46:00 localhost rc.sysinit: Mise en place des param
tres du noyau
: succeeded
Aug 7 10:46:02 localhost date: Mon Aug 7 10:46:02 CEST 2006
Aug 7 10:46:02 localhost rc.sysinit: R
glage de l'horloge (localtime)
: Mon Aug 7 10:46:02 CEST 2006 succeeded
Aug 7 10:46:02 localhost rc.sysinit: Chargement du clavier par d
faut succeeded
Aug 7 10:46:02 localhost rc.sysinit: Affectation du nom de machine localhost
: succeeded
Aug 7 10:46:02 localhost fsck: /dev/hdc6: clean, 54370/768544 files, 263038/1534199 blocks
Aug 7 10:46:02 localhost rc.sysinit: Remontage du syst
me de fichiers racine en
criture
: succeeded
Aug 7 10:46:02 localhost rc.sysinit: Activation des partitions d'
changes (swap)
: succeeded
Aug 7 10:46:02 localhost : Loading module: amd64-agp
Aug 7 10:46:02 localhost fsck: /dev/hdc8: clean, 14261/1452480 files, 1424405/2899724 blocks
Aug 7 10:46:02 localhost mount: mount: special device /dev/mapper/nvidia_cfgffbfe1 does not exist
Aug 7 10:46:02 localhost mount: mount: special device /dev/mapper/nvidia_cfgffbfe5 does not exist
Aug 7 10:46:02 localhost rc.sysinit: Montage des syst
mes de fichiers locaux
: failed
Aug 7 10:46:02 localhost rc.sysinit: Montage des syst
mes de fichiers loopback
: succeeded
Aug 7 10:46:02 localhost loadkeys: Loading /usr/lib/kbd/keymaps/i386/azerty/fr-latin1.kmap.gz
Aug 7 10:46:02 localhost keytable: Chargement de la table des touches
: fr-latin1 succeeded
Aug 7 10:46:02 localhost loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin9.inc.gz
Aug 7 10:46:02 localhost keytable: Chargement des touches compose
: compose.latin9.inc succeeded
Aug 7 10:46:02 localhost keytable: succeeded
Aug 7 10:46:03 localhost rc.sysinit: Activation des espaces d'
change
: succeeded
Aug 7 10:46:03 localhost mandrake_everytime: Lancement de netprofile
: succeeded
Aug 7 10:46:11 localhost harddrake: succeeded
Aug 7 10:46:11 localhost network: Application des param
tres r
seau succeeded
Aug 7 10:46:11 localhost network: D
marrage de l'interface loopback
: succeeded
Aug 7 10:46:11 localhost shorewall: Loading /usr/share/shorewall/functions...
Aug 7 10:46:11 localhost shorewall: Processing /etc/shorewall/params ...
Aug 7 10:46:11 localhost shorewall: Processing /etc/shorewall/shorewall.conf...
Aug 7 10:46:11 localhost shorewall: Loading Modules...
Aug 7 10:46:12 localhost shorewall: Starting Shorewall...
Aug 7 10:46:12 localhost shorewall: Initializing...
Aug 7 10:46:12 localhost shorewall: Shorewall has detected the following iptables/netfilter capabilities:
Aug 7 10:46:12 localhost shorewall: NAT: Available
Aug 7 10:46:12 localhost shorewall: Packet Mangling: Available
Aug 7 10:46:12 localhost shorewall: Multi-port Match: Available
Aug 7 10:46:12 localhost shorewall: Extended Multi-port Match: Available
Aug 7 10:46:12 localhost shorewall: Connection Tracking Match: Available
Aug 7 10:46:12 localhost shorewall: Packet Type Match: Available
Aug 7 10:46:12 localhost shorewall: Policy Match: Not available
Aug 7 10:46:12 localhost shorewall: Physdev Match: Available
Aug 7 10:46:12 localhost shorewall: IP range Match: Available
Aug 7 10:46:12 localhost shorewall: Recent Match: Available
Aug 7 10:46:12 localhost shorewall: Owner Match: Not available
Aug 7 10:46:12 localhost shorewall: Ipset Match: Available
Aug 7 10:46:12 localhost shorewall: ROUTE Target: Available
Aug 7 10:46:12 localhost shorewall: Extended MARK Target: Available
Aug 7 10:46:12 localhost shorewall: CONNMARK Target: Available
Aug 7 10:46:12 localhost shorewall: Connmark Match: Available
Aug 7 10:46:12 localhost shorewall: Determining Zones...
Aug 7 10:46:12 localhost shorewall: Error: No Zones Defined
Aug 7 10:46:12 localhost rc: Lancement de shorewall
: failed
Aug 7 10:46:15 localhost cups: D
marrage de cupsd succeeded
Aug 7 10:46:16 localhost alsa: succeeded
Aug 7 10:46:16 localhost sound: R
glage des param
tres du mixeur succeeded
Aug 7 10:46:16 localhost xfs: D
marrage de xfs succeeded
Aug 7 10:46:16 localhost messagebus: D
marrage de messagebus succeeded
Aug 7 10:46:16 localhost mount: mount: special device /dev/mapper/nvidia_cfgffbfe1 does not exist
Aug 7 10:46:16 localhost mount: mount: special device /dev/mapper/nvidia_cfgffbfe5 does not exist
Aug 7 10:46:16 localhost netfs: Montage des autres syst
mes de fichiers
: failed
Aug 7 10:46:16 localhost mandi: mandi_daemon_add_watch(): READABLE
Aug 7 10:46:16 localhost mandi: unable to open white list file
Aug 7 10:46:16 localhost mandi: D
marrage de mandi succeeded
Aug 7 10:46:16 localhost numlock: Lancement du verrouillage num
rique
: ^[[65G[^[[1;32m
Aug 7 10:46:16 localhost numlock:
Aug 7 10:46:16 localhost rc: Lancement de numlock
: succeeded
Aug 7 10:46:17 localhost dm: D
marrage du gestionnaire de connexion succeeded
Aug 7 10:46:17 localhost atd: D
marrage de atd succeeded
Aug 7 10:46:17 localhost rawdevices: succeeded
Aug 7 10:46:17 localhost xinetd: D
marrage de xinetd succeeded
Aug 7 10:46:17 localhost loadkeys: Loading /usr/lib/kbd/keymaps/i386/azerty/fr-latin1.kmap.gz
Aug 7 10:46:17 localhost keytable: Chargement de la table des touches
: fr-latin1 succeeded
Aug 7 10:46:17 localhost loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin9.inc.gz
Aug 7 10:46:17 localhost keytable: Chargement des touches compose
: compose.latin9.inc succeeded
Aug 7 10:46:17 localhost keytable: succeeded
Aug 7 10:46:18 localhost crond: D
marrage de crond succeeded
Aug 7 10:46:18 localhost rc: Lancement de kheader
: succeeded


[nico88120.free.fr]

Poste le Monday 7 August 2006 11:30:22

çà parle à quelqu'un?!

Moi j'y comprens pas grand chose

[nico88120.free.fr]

Poste le Monday 7 August 2006 11:31:07

Je crois que le raid avec une carte mère à base de nforce4 est un raid semi-materiel.
c'est à dire qu'il necessite un drivers, que tu installes en faisant F6? sous win.

Je pense que ce genre de raid n'est pas supporté par linux(sans aucune certitude)
Il faut, je crois, choisir dans ce cas là un raid logiciel...
ou mettre une carte controleur pour faire du vrai raid materiel.

Poste le Wednesday 9 August 2006 14:27:55

bon J'ai fini par trouver une solution.

Installer la distribution Fedora core 5 çà marche car d'office il installe le package dmraid

[nico88120.free.fr]

Poste le Tuesday 15 August 2006 12:21:31