Léa-Linux & amis :   LinuxFR   GCU-Squad   GNU
Pilote Ati
Envoyé par: Niao

Bonjour,

Je suis nouveaux sous linux j ai une mandrake 10.0 et je voudrai faire marché "correctement ma carte de . -"çé ati radeon 9600 pro Mais c bizzard car elle ne veux pas j ai installé le rpm ati en force tous c est passé correctememnt

Ensuite fglrxconfig en root j ai suivit les instruction puis j ai relancer le serveur x et la plaf ça marche lancement de tux racer Il est lent comme pas possible impossible de lancer ennemy territory aussiX -o

alors je tente un fglrxinfo et la il me dit a ma grande tres tres grande surprise

Xlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4

alors la je comprend plus rien g pourtant telecharger mes pilotes sous ati et ce petit detail tres penible risquerait de faire pencher la balance pour windobe!!!

Voici mon mail pour me joindre soit par msn

Niao42@yahoo.fr Merci d avance

Poste le Thursday 7 April 2005 12:31:08
Répondre     Citer    
Re: Pilote Ati
Envoyé par: diancech

Tu dois avoir un fichier de log pour dans /var/log/.

Il s'appelle XFree.0.log ou quelque chose d'approchant (vérifie !!).

Pourrais tu faire,en root, un :

cat /var/log/XFree.0.log | grep "(WW)"

Et :

cat /var/log/XFree.0.log | grep "(EE)"

Et poster les résultats ici.

--------------------------------------------------------------------------------------------------------------------------------------------------
Exige beaucoup de toi-même et attends peu des autres. Ainsi beaucoup d'ennuis te seront épargnés. Confucius

Poste le Thursday 7 April 2005 13:48:39
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

Voice mon xfree86.0.log
<quote>
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.3-3mdkenterprise i686 [ELF]
Build Date: 24 March 2004
Before reporting problems, check [www.XFree86.Org]
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Apr 6 12:00:43 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "device1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80008d48, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 147b,140f rev 80 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 109e,036e card 0070,13eb rev 11 class 04,00,00 hdr 80
(II) PCI: 00:0a:1: chip 109e,0878 card 0070,13eb rev 11 class 04,80,00 hdr 80
(II) PCI: 00:0c:0: chip 1102,0002 card 1102,8064 rev 07 class 04,01,00 hdr 80
(II) PCI: 00:0c:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 00:10:0: chip 1106,3038 card 147b,140f rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 147b,140f rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 147b,140f rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 147b,140f rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 147b,140f rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 147b,140f rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 147b,140f rev 50 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 147b,140f rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4150 card 148c,2064 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4170 card 148c,2065 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd1ffffff (0x2000000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI: (0:10:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xd2000000/12
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x4150) rev 0, Mem @ 0xb0000000/28, 0xd1000000/16, I/O @ 0xc000/8
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4170) rev 0, Mem @ 0xc0000000/28, 0xd1010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(cool smiley
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(cool smiley
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0x80000000 from 0x9fffffff to 0x7fffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2003000 - 0xd20030ff (0x100) MX
[1] -1 0 0xd2002000 - 0xd20020ff (0x100) MX
[2] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX
[3] -1 0 0x80000000 - 0x7fffffff (0x0) MXO
[4] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX(cool smiley
[5] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX(cool smiley
[6] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX(cool smiley
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX
[9] -1 0 0x0000e400 - 0x0000e40f (0x10) IX
[10] -1 0 0x0000e000 - 0x0000e01f (0x20) IX
[11] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX
[12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX
[13] -1 0 0x0000d400 - 0x0000d407 (0x8) IX
[14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[15] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(cool smiley
(II) Inactive PCI resource ranges:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX(cool smiley
[1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX(cool smiley
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2003000 - 0xd20030ff (0x100) MX
[1] -1 0 0xd2002000 - 0xd20020ff (0x100) MX
[2] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX
[3] -1 0 0x80000000 - 0x7fffffff (0x0) MXO
[4] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX(cool smiley
[5] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX(cool smiley
[6] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX(cool smiley
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX
[9] -1 0 0x0000e400 - 0x0000e40f (0x10) IX
[10] -1 0 0x0000e000 - 0x0000e01f (0x20) IX
[11] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX
[12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX
[13] -1 0 0x0000d400 - 0x0000d407 (0x8) IX
[14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[15] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(cool smiley
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX(cool smiley
[1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX(cool smiley
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(cool smiley
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(cool smiley
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(cool smiley
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(cool smiley
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xd2003000 - 0xd20030ff (0x100) MX
[6] -1 0 0xd2002000 - 0xd20020ff (0x100) MX
[7] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX
[8] -1 0 0x80000000 - 0x7fffffff (0x0) MXO
[9] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX(cool smiley
[10] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX(cool smiley
[11] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX(cool smiley
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX(cool smiley
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX(cool smiley
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX
[16] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX
[18] -1 0 0x0000e400 - 0x0000e40f (0x10) IX
[19] -1 0 0x0000e000 - 0x0000e01f (0x20) IX
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX
[22] -1 0 0x0000d400 - 0x0000d407 (0x8) IX
[23] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(cool smiley
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 6.5.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.5) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "device1".
(WW) ATI: PCI/AGP Mach64 in slot 1:0:1 could not be detected!
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon 9600 AP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(cool smiley
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(cool smiley
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xd2003000 - 0xd20030ff (0x100) MX
[6] -1 0 0xd2002000 - 0xd20020ff (0x100) MX
[7] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX
[8] -1 0 0x80000000 - 0x7fffffff (0x0) MXO
[9] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX(cool smiley
[10] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX(cool smiley
[11] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX(cool smiley
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX(cool smiley
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX(cool smiley
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX
[16] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX
[18] -1 0 0x0000e400 - 0x0000e40f (0x10) IX
[19] -1 0 0x0000e000 - 0x0000e01f (0x20) IX
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX
[22] -1 0 0x0000d400 - 0x0000d407 (0x8) IX
[23] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(cool smiley
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(cool smiley
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(cool smiley
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xd2003000 - 0xd20030ff (0x100) MX
[6] -1 0 0xd2002000 - 0xd20020ff (0x100) MX
[7] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX
[8] -1 0 0x80000000 - 0x7fffffff (0x0) MXO
[9] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX(cool smiley
[10] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX(cool smiley
[11] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX(cool smiley
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX(cool smiley
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX(cool smiley
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX
[19] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX
[20] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX
[21] -1 0 0x0000e400 - 0x0000e40f (0x10) IX
[22] -1 0 0x0000e000 - 0x0000e01f (0x20) IX
[23] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX
[24] -1 0 0x0000d800 - 0x0000d81f (0x20) IX
[25] -1 0 0x0000d400 - 0x0000d407 (0x8) IX
[26] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[27] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(cool smiley
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xd1000000
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
(--) RADEON(0): Linear framebuffer at 0xb0000000
(--) RADEON(0): VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): AGP card detected
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 1
(II) RADEON(0): Displays Detected: Monitor1--Type 1, Monitor2--Type 0

(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: STN Model: a Serial#: 1347301689
(II) RADEON(0): Year: 2002 Week: 10
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) RADEON(0): Gamma: 2.26
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): GTF timings supported
(II) RADEON(0): redX: 0.638 redY: 0.325 greenX: 0.276 greenY: 0.596
(II) RADEON(0): blueX: 0.143 blueY: 0.066 whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 720x400@88Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@87Hz (interlaced)
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) RADEON(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #5: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
(II) RADEON(0): #6: hsize: 1792 vsize 1344 refresh: 60 vid: 16577
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 135.0 MHz Image Size: 352 x 264 mm
(II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 85 kHz, PixClock max 200 MHz
(II) RADEON(0): Monitor name: S/T 97B/96B
(II) RADEON(0): Serial No: H2RT306472
(II) RADEON(0): End of Monitor1 EDID data --------------------
(II) RADEON(0):
(II) RADEON(0): Primary Display == Type 1
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Monitor0: Using hsync range of 30.00-85.00 kHz
(II) RADEON(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
(II) RADEON(0): Clock range: 20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(**) RADEON(0): Virtual size is 1280x1024 (pitch 1280)
(**) RADEON(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) RADEON(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) RADEON(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) RADEON(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) RADEON(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) RADEON(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) RADEON(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) RADEON(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) RADEON(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) RADEON(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) RADEON(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) RADEON(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) RADEON(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) RADEON(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) RADEON(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) RADEON(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) RADEON(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RADEON(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) RADEON(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) RADEON(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) RADEON(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) RADEON(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) RADEON(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) RADEON(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) RADEON(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) RADEON(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) RADEON(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) RADEON(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) RADEON(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) RADEON(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) RADEON(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) RADEON(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) RADEON(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) RADEON(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) RADEON(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) RADEON(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(--) RADEON(0): Display dimensions: (360, 270) mm
(--) RADEON(0): DPI set to (90, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see [gatos.sf.net].
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd1000000 - 0xd100ffff (0x10000) MX
[1] 0 0 0xb0000000 - 0xbfffffff (0x10000000) MX
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(cool smiley
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(cool smiley
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[7] -1 0 0xd2003000 - 0xd20030ff (0x100) MX
[8] -1 0 0xd2002000 - 0xd20020ff (0x100) MX
[9] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX
[10] -1 0 0x80000000 - 0x7fffffff (0x0) MXO
[11] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX(cool smiley
[12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX(cool smiley
[13] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX(cool smiley
[14] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX(cool smiley
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX(cool smiley
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS(OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS(OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS(OprU)
[19] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX
[22] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX
[24] -1 0 0x0000e400 - 0x0000e40f (0x10) IX
[25] -1 0 0x0000e000 - 0x0000e01f (0x20) IX
[26] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX
[27] -1 0 0x0000d800 - 0x0000d81f (0x20) IX
[28] -1 0 0x0000d400 - 0x0000d407 (0x8) IX
[29] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(cool smiley
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS(OprU)
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS(OprU)
(WW) RADEON(0): Failed to set up write-combining range (0xb0000000,0x10000000)
(II) RADEON(0): Wrote: rd=12, fd=120, pd=1
(WW) RADEON(0): Direct rendering not yet supported on Radeon 9500/9700 and newer cards
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7165
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7161
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
SetClientVersion: 0 7
SetClientVersion: 0 7
SetGrabKeysState - disabled
SetGrabKeysState - enabled
</quote>

Pour la commande

cat /var/log/XFree.0.log | grep "(WW)"
aucun resultat

et pour

cat /var/log/XFree.0.log | grep "(EE)"

(WW) warning, (EE) error, (NI) not implemented, (??) unknown


Poste le Thursday 7 April 2005 14:06:24
Répondre     Citer    
Re: Pilote Ati
Envoyé par: diancech

Pour les deux commandes fallais changer le nom "XFree.0.log" en "XFree86.0.log" ( j'avais marqué "Vérifie !!" ;-) ).

Là ton serveur X n'utilise pas le pilote fglrx de ATI mais le pilote RADEON libre, donc c'est normal que tu n'est pas de 3D potable.

Fais un :

ll /etc/X11/

Et:

ll /lib/modules/fglrx/

Et postes les résultats.

Et il y a un tuto dans le site sur l'install des pilotes ATI :

[lea-linux.org]

--------------------------------------------------------------------------------------------------------------------------------------------------
Exige beaucoup de toi-même et attends peu des autres. Ainsi beaucoup d'ennuis te seront épargnés. Confucius

Poste le Thursday 7 April 2005 15:39:17
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

J ai essayer de suivre les instruction a la lettre du tuto que tu m 'à passer mais il y a un problel a l etape

pour trouver flgrx.ko

Si le fichier est absent : Déplacez-vous dans le dossier /lib/modules/fglrx/build_mod et entrez la séquence suivante :

# sh make.sh
# cd ..
# sh make_install.sh
Cela a pour effet de compiler et d'installer le module (vérifiez que la compilation ne produit pas d'erreurs) !


pour le make sh ma console me renvoi

ATI module generator V 2.0
==========================
initializing...
Error:
kernel includes at /usr/src/linux/include do not match current kernel.
they are versioned as ""
instead of "2.6.3-7mdk".
you might need to adjust your symlinks:
- /usr/include
- /usr/src/linux
[root@localhost build_mod]#

pour le make installe


*** WARNING ***
Tailored kernel module for fglrx not present in your system.
You must go to /lib/modules/fglrx/build_mod subdir
and execute './make.sh' to build a fully customed kernel module.
Afterwards go to /lib/modules/fglrx and run './make_install.sh'
in order to install the module into your kernel's module repository.
(see readme.txt for more details.)

As of now you can still run your XServer in 2D, but hardware acclerated
OpenGL will not work and 2D graphics will lack performance.

failed.

et la moi g po trop compris
merci d avance a celui ou celle qui eclairera ma lanterne

Poste le Friday 8 April 2005 11:38:46
Répondre     Citer    
Re: Pilote Ati
Envoyé par: ceric35

Normal , un tuto faut le lire en entier et commencer par le debut !

Surtout : [lea-linux.org]

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Friday 8 April 2005 11:56:43
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

Effectivement un detail m a echappé lors que je tape la commande
unram -r
il me donne
2.6.3.7mdk

et en tappant la commande
ls -l /usr/src
le lien pointe sur

total 12
drwxr-xr-x 2 root root 4096 avr 7 11:26 ATI/
lrwxrwxrwx 1 root root 17 avr 7 11:14 linux -> linux-2.6.3-25mdk/
drwxr-xr-x 20 root root 4096 avr 7 11:14 linux-2.6.3-25mdk/
drwxr-xr-x 3 root root 4096 avr 4 12:36 RPM/

Si jai bien compris crex deux doivent etres coordonné mais pourquoi ne le sont il pas
comment faire pour que ce soit la meme version???

Merci de me repondre je ne suis qu un debutant reconnaissan et ebloui par votre connaissance!!!!


Poste le Friday 8 April 2005 16:30:48
Répondre     Citer    
Re: Pilote Ati
Envoyé par: diancech

Lance le mandrake control center puis va dans "Gestionnaire de logiciels > Supprimer" puis tu cherches "kernel-source", il devrait te trouver ça "kernel-source-2.6-2.6.3-25mdk" tu coches le paquet puis tu fais supprimer.

Ensuite tu vas dans "Gestionnaire de logiciels > Installer" tu cherche "kernel-source", il va peut être t'en trouver plusieurs tu coche "kernel-source-2.6-2.6.3.7mdk" puis tu fais installer.

;-)

--------------------------------------------------------------------------------------------------------------------------------------------------
Exige beaucoup de toi-même et attends peu des autres. Ainsi beaucoup d'ennuis te seront épargnés. Confucius

Poste le Friday 8 April 2005 16:40:38
Répondre     Citer    
Re: Pilote Ati
Envoyé par: niao

desoler mais j ai desistaller l autre mais le nv n y est pas
kernel-source-2.6-2.6.3.7mdk
j ai cherché sous google et sur quelque serveur rpm
que faire ou trouver kernel-source-2.6-2.6.3.7mdk
Merci d avance

Poste le Friday 8 April 2005 17:17:12
Répondre     Citer    
Re: Pilote Ati
Envoyé par: P Hoquet

Salut,
Une autre solution est de garder kernel-source-2.6-2.6.3-25mdk et installer le kernel correspondant


Poste le Friday 8 April 2005 18:16:45
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

Ok comment reinstalle t on un kernel correspondant c l hors du telechargement du pilote ati???

Poste le Friday 8 April 2005 18:20:11
Répondre     Citer    
Re: Pilote Ati
Envoyé par: P Hoquet

Tu fais:
# kernel-2.6.3.25mdk-1-1mdk
(en étant connecté au net évidemment) et ton nouveau kernel va s'installer.


Poste le Friday 8 April 2005 18:31:56
Répondre     Citer    
Re: Pilote Ati
Envoyé par: diancech

Les sources du 2.6.3.7mdk sont sur les cds de la mandrake à mon avis dans gestionnaire de logiciels > gestionnaire des médias les CD sont décochés, c'est pour cela qu'il ne trouve pas le paquet, donc recoche les et fais ok et recommence.

Pour la commande de P_hoquet c'est :

# urpmi kernel-2.6.3.25mdk-1-1mdk

;-)

--------------------------------------------------------------------------------------------------------------------------------------------------
Exige beaucoup de toi-même et attends peu des autres. Ainsi beaucoup d'ennuis te seront épargnés. Confucius

Poste le Friday 8 April 2005 18:50:12
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

Helas non
a la commande uname -r il me donne toujour
2.6.3-7mdk

[niao@localhost niao]$ # kernel-2.6.3.25mdk-1-1mdk
[niao@localhost niao]$ uname -r
2.6.3-7mdk
[niao@localhost niao]$ ls -l /usr/src
total 12
drwxr-xr-x 2 root root 4096 avr 7 11:26 ATI/
lrwxrwxrwx 1 root root 17 avr 7 18:27 linux -> linux-2.6.3-25mdk/
drwxr-xr-x 20 root root 4096 avr 7 18:27 linux-2.6.3-25mdk/
drwxr-xr-x 3 root root 4096 avr 4 12:36 RPM/

rien n a changer les deux sont toujour différent et dans le tutoriale ati il me demande d avoir les meme version

Poste le Friday 8 April 2005 18:50:52
Répondre     Citer    
Re: Pilote Ati
Envoyé par: nicola

Et si tu commentais le module speedo dans XF86Config-4 ?

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Friday 8 April 2005 20:16:53
Répondre     Citer    
Re: Pilote Ati
Envoyé par: P Hoquet

$ # kernel-2.6.3.25mdk-1-1mdk
C'est une commande ça ??!!!
La commande à taper est urpmi kernel-2.6.3.25mdk-1-1mdk
# est la fin de l'invite du root.
C'est pour indiquer qu'il faut d'abord devenir root avant de taper la commande.


Poste le Friday 8 April 2005 21:44:07
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

deye rolling smiley

Tous d abord un grand merci a toute l equipe car j ai obtenu plus de resultat avec vous en une journée que moi seul en une semaine

[root@localhost etc]# fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 1.3.4893 (X4.3.0-8.10.19)

mais il y a quelque chose d etrange c est que j ai une 9600 pro 256 ddr en mediamax
et que l acceleration 3d ne fonctionne pas du tt c meme plus lent que avant et je n ai pas la moindre idée d ou cela peu venir

Poste le Saturday 9 April 2005 10:10:52
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

Voici quelque test que j ai effectué

J ai le même probleme maintenant

[root@localhost niao]# glxgears
8386 frames in 5.0 seconds = 1677.200 FPS
Broken pipe
[root@localhost niao]# fgl_glxgear
bash: fgl_glxgear: command not found
[root@localhost niao]# fgl_glxgears
FGLTexMgr: open of shared memory object failed (Function not implemented)
__FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed!!!
fglX11AllocateManagedSurface: __FGLTexMgrCreateObject failed!

Je n abandonnerai pas ma mandrake si pres du but

glxgears fonctionne mais fgl_glxgears ne fonctionne pas

:-o

Poste le Saturday 9 April 2005 10:31:09
Répondre     Citer    
Re: Pilote Ati
Envoyé par: Niao

Le sujet peux etres clos!!!!! deye rolling smiley

J ai la solution elle est simple même très simple

Ajouter la ligne suivante dans le fichier /etc/fstab

tmpfs /dev/shm tmpfs defaults 0 0
mount /dev/shm

ensuite a la ligne de commande

mount | grep "shm"

cela doit afficher quelque chose comme

tmpfs on /dev/shm type tmpfs (rw)

L imprortant c que ça affiche pas d erreur

lancer fgl_glxgears et ça marche


Merci a tous
amlgré la resolution de mon problem je serai toujour present sur lea linux y a t il un moyen de devenir membre

Poste le Saturday 9 April 2005 11:05:27
Répondre     Citer    
Re: Pilote Ati
Envoyé par: ceric35

Ca aussi , c'etait sur le tuto [lea-linux.org] ;-)

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Saturday 9 April 2005 11:13:34
Répondre     Citer    

Veuillez vous authentifier auparavant pour commenter.

 

Ce forum !
Pilote Ati
Vous voulez savoir si votre matériel est supporté par Linux, ou vous avez un problème pour installer un module ? Ce forum est pour vous !

Sauf mention contraire, les documentations publiées sont sous licence Creative-Commons