X étais toujours démarré quand tu as fais l'install ?? si c'est le cas en redémarant tu n'auras pas de soucis.

Sinon c'est peut être le module de l'agp de ta carte-mére qui n'étais pas chargé.

--------------------------------------------------------------------------------------------------------------------------------------------------
Exige beaucoup de toi-même et attends peu des autres. Ainsi beaucoup d'ennuis te seront épargnés. Confucius

Poste le Tuesday 5 April 2005 19:18:52

Après vérification, le fichier fglrx.ko s'installe bien dans /lib/modules/2.6.8.1-12mdk/kernel/drivers/char/drm.

Je vais continuer à installer les drivers, mais je reste preneur si quelqu'un a une suggestion.

N’oubliez pas qu’il existe 10 types de personnes. Celles qui savent compter en binaire et les autres...

Poste le Tuesday 5 April 2005 19:20:26

Tu n'a pas un autre module qui bloque ?

Genre RADEON , ou autre ?

auquel cas il faudrait decharger celui-ci pour charger fglrx !

fait un "lsmod|grep apggart" pour le voir ...

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Tuesday 5 April 2005 23:25:05

En faisant lsmod|grep agpgart, j'obtiens ça :

agpgart 27752 2 via-agp


N’oubliez pas qu’il existe 10 types de personnes. Celles qui savent compter en binaire et les autres...

Poste le Wednesday 6 April 2005 19:18:29

Cette erreur apparait où ? lorsque tu fait un modprobe ?

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Wednesday 6 April 2005 19:35:36

Elle apparaît après la commande rpm -Uh

N’oubliez pas qu’il existe 10 types de personnes. Celles qui savent compter en binaire et les autres...

Poste le Wednesday 6 April 2005 19:41:55

essaie de faire "modprobe fglrx" pour voir !

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Wednesday 6 April 2005 19:53:13

Il lance fglrxconfig ?-(

N’oubliez pas qu’il existe 10 types de personnes. Celles qui savent compter en binaire et les autres...

Poste le Wednesday 6 April 2005 19:56:39

quoi ?

bon autre chose !

peut-tu donner le resultat de "dmesg" ?

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Wednesday 6 April 2005 19:58:41

Faut dire que j'ai déjà tenté (et avorté pour cause de problème de clavier) un fglrxconfig. Je vais regarder dmesg.

Le voilà :

[root@localhost root]# dmesg
Linux version 2.6.8.1-12mdk (quintela@n5.mandrakesoft.com) (gcc version 3.4.1 (Mandrakelinux (Alpha 3.4.1-3mdk)) #1 Fri Oct 1 12:53:41 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
BIOS-e820: 0000000027ff0000 - 0000000027ff3000 (ACPI NVS)
BIOS-e820: 0000000027ff3000 - 0000000028000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
639MB LOWMEM available.
On node 0 totalpages: 163824
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 159728 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f7610
ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x27ff3000
ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x27ff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux ro root=305 acpi=ht resume=/dev/hdc5 splash=silent
bootsplash: silent mode.
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1300.200 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 645212k/655296k available (1859k kernel code, 9332k reserved, 578k data, 200k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2572.28 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
init init/main.c:689
init init/main.c:702
init init/main.c:707
do_pre_smp_initcalls init/main.c:653
do_pre_smp_initcalls init/main.c:659
init init/main.c:711
init init/main.c:714
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1299.0155 MHz.
..... host bus clock speed is 199.0869 MHz.
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 239k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 8d & 1f -> 0d
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
spurious 8259A interrupt: IRQ7.
vesafb: framebuffer at 0xd0000000, mapped to 0xe8800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:556c
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1112814437.4294966400:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 43372 bytes, found (800x600, 17858 bytes, v3).
Console: switching to colour frame buffer device 97x36
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: Maxtor 6Y120L0, ATA DISK drive
hdb: PLEXTOR DVD-ROM PX-116A3, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IBM-DTLA-307015, ATA DISK drive
hdd: HL-DT-ST CD-RW GCE-8522B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 240121728 sectors (122942 M w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 > p3
hdc: max request size: 128KiB
hdc: 30003120 sectors (15361 M w/1916KiB Cache, CHS=29765/16/63, UDMA(33)
/dev/ide/host0/bus1/target0/lun0: p1 p2 < p5 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
Freeing unused kernel memory: 200k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
IRQ routing conflict for 0000:00:07.2, have irq 10, want irq 11
IRQ routing conflict for 0000:00:07.3, have irq 10, want irq 11
PCI: Sharing IRQ 11 with 0000:00:0a.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:07.3
IRQ routing conflict for 0000:00:07.2, have irq 10, want irq 11
IRQ routing conflict for 0000:00:07.3, have irq 10, want irq 11
PCI: Sharing IRQ 11 with 0000:00:0a.0
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 10, io base 0000d800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:07.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ts: Compaq touchscreen protocol output
bootsplash: status on console 0 changed to on
Adding 522072k swap on /dev/hda1. Priority:-1 extents:1
Adding 1041032k swap on /dev/hdc5. Priority:-2 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: AGP aperture is 64M @ 0xe0000000
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
Supermount version 2.0.4 for kernel 2.6
NTFS driver 2.1.15 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
ReiserFS: hda9: found reiserfs format "3.6" with standard journal
ReiserFS: hda9: using ordered data mode
ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda9: checking transaction log (hda9)
ReiserFS: hda9: Using r5 hash to sort names
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: hda7: Removing [326 24575 0x0 SD]..done
ReiserFS: hda7: Removing [25 24487 0x0 SD]..done
ReiserFS: hda7: There were 2 uncompleted unlinks/truncates. Completed
loop: loaded (max 8 devices)
hdb: ATAPI 50X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 11 for device 0000:00:0a.0
IRQ routing conflict for 0000:00:07.2, have irq 10, want irq 11
IRQ routing conflict for 0000:00:07.3, have irq 10, want irq 11
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
tulip0: MII transceiver #2 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #3 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #4 config 1000 status 786d advertising 05e1.
eth0: ADMtek Comet rev 17 at 0xe000, 00:04:E2:33:20:30, IRQ 11.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (5119 buckets, 40952 max) - 328 bytes per conntrack
inserting floppy driver for 2.6.8.1-12mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (5119 buckets, 40952 max) - 328 bytes per conntrack
PCI: Found IRQ 12 for device 0000:00:0d.0
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 16065 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 16065 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 16065 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 16065 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 16065 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 16065 bytes, v3).
bootsplash: status on console 5 changed to on
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0322b60(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x100000
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x100000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Loading R200 Microcode
eth0: no IPv6 routers present


N’oubliez pas qu’il existe 10 types de personnes. Celles qui savent compter en binaire et les autres...

Poste le Wednesday 6 April 2005 20:27:13

Pas de trace de fglrx , bizar ?

Il faut peut-etre effectue fglrxconfig jusqu'au bout !

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Wednesday 6 April 2005 20:30:11

Je suis bien d'accord!
J'ai dit plus haut que je pensais être capable de les réinstaller, comme la première fois.

Mais cette erreur m'intrigue. Tout semble s'installer malgré elle, mais je me demandais si les plantages que j'avais sur mon précédent système pouvaient provenir de là.

N’oubliez pas qu’il existe 10 types de personnes. Celles qui savent compter en binaire et les autres...

Poste le Wednesday 6 April 2005 20:46:31

Je coyait que le fglrxconfig generais juste le xorg.conf !

Il fait peut-etre d'autres reglages !!! je sais pas !

-------------------------------------------------------------------------------------------------
Linux est pour la firme de Redmond ce qu'est James Bond pour les
méchants dans les films : le dernier obstacle avant la domination mondiale.

Poste le Wednesday 6 April 2005 20:57:10