Sur ma Mandrake 10.1, voila comment j'ai fait:
Récupérer qc-usb-2004115.tar.gz sur [
www.ketelhot.net]
Récupérer xawtv-3.94.tar.gz sur [
dl.bytesex.org]
Se mettre en root
décompresser+détarer xawtv-3.94.tar.gz
./configure
make
make install
décompresser+détarer qc-usb-2004115.tar.gz
./quickcam.sh LINUX_DIR=/usr/src/linux (et suivre ce qui est indiqué à l'écran!)
A la phase: Testing if /dev/video0 is correct, le script met une erreur
[!] Bad minor number in , should be 0.
To correct this problem, remove the bad file and
recreate it with mknod-command (read man mknod). Example:
rm -f /dev/video0
mknod /dev/video0 c 81 0
chmod a+rw /dev/video0
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue --->
Ne pas mettre fin au script et ouvrir une autre fenetre terminal en root:
rm -f /dev/video0
rm /dev/video
mknod /dev/video0 c 81 0
mknod /dev/video1 c 81 1
chmod a+rw /dev/video0
ln -s /dev/video0 /dev/video
Continuer le script de l'autre fenetre. Normalement tout doit bien se termier.
Ajouter une ligne: quickcam dans le fichier /etc/modules.
Lancer xawtv et ca marche! en tout cas sur mon linux! :-p
Texte à mettre en italiqueTexte à mettre en italique
Poste le Friday 1 April 2005 22:59:50