extrait du site de vectorlinux:
DOS/WINDOWS/LINUX HD Install
===================================================================
If you can't boot from a CD, you'll need to boot from
floppy disks and then place the VL files somewhere on your
computer where they can be found during the install process.
Create root and boot floppies. The ftp archive contains
a "disks" folder that contains one root image and several
choices for boot floppies
Which boot image should I choose?
-------------------------------------
i386ide.img - for 386/486 computers with an ide interface
i386scsi.img - for 386/486 computers with a SCSI interface
pentide.img - for pentium or newer computers with an ide interface
pentscsi.img - for pentium or newer computers with a SCSI interface
rootdisk.img - there's only one, so you need this one!
How to transfer the img file to a floppy:
--------------------------------------------
- from Windows you can use rawrite. This is available in the
dostools directory on the VL ftp site or at
.
- from Linux, issue the following command to write an image to a
floppy: dd if=diskimagename.img of=/dev/fd0
Poste le Saturday 6 December 2003 23:29:58