merci pour ta réponse
Coté Ram, 1 Go
Coté Smartmontools, j'ai lancé la commande sur le /dev/hda
Cela donne à priori 5 erreurs :
"Error 5 occurred at disk power-on lifetime: 4556 hours (189 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state."
Avec un joli tableau :
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 064 063 020 Pre-fail Always - 4582
4 Start_Stop_Count 0x0032 096 096 008 Old_age Always - 2655
5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 093 023 Pre-fail Always - 0
9 Power_On_Hours 0x0012 081 081 001 Old_age Always - 12482
10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 008 Old_age Always - 2606
13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 085 077 042 Old_age Always - 39
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 956845
196 Reallocated_Event_Count 0x0010 100 100 020 Old_age Offline - 0
197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x001a 198 198 000 Old_age Always - 2
Comment interpréter la chose ???
Si j'en crois [
lea-linux.org]
- Le disque à eu 2606 mises sous tension
- que vu les valeurs "Old_Age" et "Pré_fail" cela commence a sentir le cramé. Quoique, j'ai fais le test sur un disque quasi neuf (100 mises sous tension), toutes les valeurs ont un type "pré-fail" ou "old age".
D'autres commentaires ?
En tout cas, cela m'a permis de connaitre un outil à priori sympa, surtout quand j'aurais paramétré postfix pour les alertes.