Bonjour,

j'ai un scanner agfa snapscan 310 connecté à l'arrière d'un Epson
Filmscan 200;lequel est sur une carte scsi. Les deux fonctionnent et sont
reconnus sous win xp et sous Mandrake 9.2. Avec ubuntu (feisty fawn 7-04),
seul l'Agfa Snapscan est reconnu dans les softs (vuescan principalement
sous les trois OS). Quelles commandes pour vérifier l'existence des
scanners? Quels fichiers pour les-y trouver ainsi que leurs réglages
------------------------------------
Avec un dmesg je vois dans la réponse mes deux scanners voyez ci dessous:

[ 33.797868] scsi 0:0:3:0: Scanner AGFA SNAPSCAN 310 1.20 PQ: 0 ANSI: 2
[ 33.797892] target0:0:3: Beginning Domain Validation
[ 33.842584] target0:0:3: Ending Domain Validation
[ 33.850528] ata2.00: configured for UDMA/33
[ 34.018231] ata2.01: configured for MWDMA2
[ 34.018251] scsi: waiting for bus probes to complete ...
[ 34.398293] scsi 0:0:6:0: Processor EPSON FilmScan 200 1.01 PQ: 0 ANSI: 1
------------------------------------------
Voici ce que j'ai comme réponse à sane-find-scanner et à scanimage -L:


*****@ubuntu:~$ sane-find-scanner

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

found SCSI scanner "AGFA SNAPSCAN 310 1.20" at /dev/sg0
# Your SCSI scanner was detected. It may or may not be supported by SANE. Try
# scanimage -L and read the backend's manpage.

found USB scanner (vendor=0x046d, product=0x08f0) at libusb:002:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
*****@ubuntu:~$ scanimage -L
device `snapscan:/dev/sg0' is a AGFA SNAPSCAN 310 flatbed scanner
device `hpaio:/par/HP_LaserJet_1100?device=/dev/parport0' is a Hewlett-Packard HP_LaserJet_1100 all-in-one
*****@ubuntu:~$
-------------------------------------------
Une idée pour avancer???
Toute suggestion est bienvenue.

Hubert

Poste le Tuesday 4 September 2007 17:12:40