Citation
tom-tom
Vérifie que make soit installé sur ton PC, et
relance la compilation du module.
Dans /usr/src/ as-tu un répétoire ou un fichier
.tar.gz ?

Citation
tom-tom
Normalement make est dans /usr/bin.

D'ou lances-tu la compilation ? Normalement tu as
téléchargé un fichier .tar.gz pour cette clé USB,
quand on lance la commande tar un répétoire est
crée du nom de l'archive .tar.gz : il faut la
compilation dans ce répétoire.

De plus, il y a toujours un fichier INSTALL ou
README pour avoir des plus amples informations sur
la procédure d'installation.

Citation
dtp
@pingus: ls /usr/src me donne un truc comme <je sais plus trop>2.6.12-17mdk. En gros je suis certain du 17 à la fin !

Citation
dtp
J ai donc telecharge kernel-source-2.6-2.6.12-12mdk.i586.rpm
J essaie de l installer (pas par la conole), et il me dit : tous les paquetages sont deja installes.
image : sue Que faire alors ?

http://lea-linux.org/cached/index/RT2500.html

======================================================================
Build Instructions:  
====================
For 2.4 or 2.6 series kernel:
a. $tar -xvzf rt2500-x.x.x.tar.gz
    go to "./rt2500-x.x.x/Module" directory.

b. $make                # compile driver source code

c. $make install	# installs kernel module driver 

(read end of file for FedoraCore3 specific information) 
 
=======================================================================
To BUILD UTILITY
====================

a.  go to the "./Utility" directory

b.  run 'qmake -o Makefile raconfig2500.pro'
    If qmake command is not found in your system, you can download the QT tool 
    'qt-x11-free-3.2.1' or later at 
    [www.trolltech.com]
    
    (qmake comes with RedHat 7.3 or later QT Package)    

c.  run 'make" to compile the utility source code.
   
d.  After all, an execution file would be generated "RaConfig2500"
    run "RaConfig2500" to config the driver as you want



=======================================================================
CONFIGURATION:  
====================
RT2500 driver can be configured via following interfaces, 
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file, (iv) RaConfig2500

i)  iwconfig comes with kernel.  
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)copy configuration file "RT2500STA.dat" to /etc/Wireless/RT2500STA/RT2500STA.dat.
    Please refer to 3.1) for details.
iv) RT2500 provides API : RaConfig2500, please go to directory ./Utility and refer to how-to-compile.txt

           
Configuration File : RT2500STA.dat

# Copy this file to /etc/Wireless/RT2500STA/RT2500STA.dat
# This file is a binary file and will be read on loading rt2500.o module.
#
# Use "vi -b RT2500STA.dat" to modify settings according to your need.
# 
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using as Infrastructure-mode
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "OPEN", "SHARED", "AUTO", "WPAPSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
# When editing the file, make sure the filesize does not exceed 1024 Bytes (1kb).
# Anything stored beyond the 1024 bte limit will be ignored by the driver.
#
[Default]
CountryRegion=0
WirelessMode=0
SSID=AP350
NetworkType=Infra
Channel=0
AuthMode=OPEN

Citation
dtp
Bon j ai voulu suivre le fichier README se trouvant dans :/home/francois/testcreation/rt2500-cvs-2006032914/Module