Salut,
Ca donne quoi quand tu fais sane-find-scanner

Poste le Tuesday 1 June 2004 20:12:58

emmanuel@localhost emmanuel]$ sane-find-scanner

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".

found USB scanner (vendor=0x04b8, product=0x0802) at /dev/usb/scanner0
found USB scanner (vendor=0x04b8, product=0x0802) at /dev/usbscanner
found USB scanner (vendor=0x04b8, product=0x0802) at libusb:002:002
# A USB device was detected. This program can't be sure if it's really
# a scanner. If it is your scanner, it may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Scanners connected to the parallel port or other proprietary ports can't be
# detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
[emmanuel@localhost emmanuel]$

Miracle il semble avoir touvé le scanner mais comment le configurer ?

Merci

Poste le Thursday 3 June 2004 20:27:30

Edit le fichier /etc/sane.d/epson.config, met usb 0x04b8 0x0802, décommente usb /dev/usb/scanner0 ou usb /dev/usbscanner Et regardes dans /etc/sane.d/dll.conf si il ya epson.

Poste le Thursday 3 June 2004 20:49:40

Je le fais et te tiens au courant.


Merci

Poste le Thursday 3 June 2004 21:16:31

# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner - only enable this if you have an EPSON scanner. It could
# otherwise block your non-EPSON scanner from being
# recognized.
# Depending on your distribution, you may need either the
# first or the second entry.
#usb 0x04b8 0x0802


Et dans le fichier dll il y a bien epson et plein d'autres noms.

Mais quand je démarre xsane il ne trouve pas le scanner.

Merci

Poste le Thursday 3 June 2004 21:49:46

#scsi EPSON
usb 0x04b8 0x0802
usb /dev/usb/scanner0

Poste le Thursday 3 June 2004 21:56:35

epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
usb 0x04b8 0x0802
usb /dev/usb/scanner0

mais ça marche toujours pas ???

Poste le Thursday 3 June 2004 23:07:34

c'est pas l'une ou l'autre ligne à commenter ?

# Depending on your distribution, you may need either the
# first or the second entry.
#usb 0x04b8 0x0802

donc

SCSI scanner:
usb 0x04b8 0x0802
#usb /dev/usb/scanner0

ou

SCSI scanner:
#usb 0x04b8 0x0802
usb /dev/usb/scanner0



"Tout corps plongé dans un flux d'emmerdements pivote de façon à lui offrir sa surface maximale." Pierre Dac
Cyaj Linux Counter #346604

Poste le Friday 4 June 2004 07:37:11

sinon, tu telecharges "iscan".
(je te laisse googlesiser)

et tu rajoutes dans /etc/sane/epkowa.conf

une ligne comme
usb 0x04b8 0x0802
(atention il faut surement changer 0x0802)

A+

Poste le Friday 4 June 2004 20:21:28

Toujours pas de scanner trouver par XSane.

Est-ce que quelqu'un d'autre à une idée ?

Merci pour tout ceux qui me sont venu en aide et aux suivants aussi

Emmanuel

Poste le Friday 4 June 2004 21:10:10

Ma distribution et HED RAT

Poste le Friday 4 June 2004 21:10:47

Encore une piste :
[root@localhost root]# scanimage -L
[epson] The device at /dev/usb/scanner0 is not a supported EPSON scanner (product id=0x802)

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Poste le Friday 4 June 2004 22:23:26