J'ai toujours plusieurs problemes:
1- Pas de support DGA par xorg apparement:
xdtv_v4l-conf
xdtv_v4l-conf: using X11 display :0.0
WARNING: Your X-Server has no DGA support.
mode: 1280x800, depth=24, bpp=32, bpl=5120, base=unknown
WARNING: couldn't find framebuffer base address, try manual
configuration ("xdtv_v4l-conf -a <addr>")
/dev/video [v4l2]: configuration done
done
2- Au lancement de xdtv:
This is xdtv 2.2.0 running on Linux/i686 (2.6.19-rc3).
scandir: Aucun fichier ou répertoire de ce type
Warning: xdtv user directory does not exist, I'm creating it.
filename = /home/origine/.xdtv/xdtvrc
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("xdtv_v4l-conf -a <addr>")
wmhooks: netwm detected
wmhooks: netwm state above supported
wmhooks: netwm fullscreen supported
wmhooks: nothing found...
VidMode: server=2.2, include=2.2
available video mode(s): 1280x800 1024x768 800x600 640x480
*** AUDIO DEVICE TYPE = alsa
WARNING: video memory base unknown, may be caused by a problem
with xdtv_v4l-conf or a non-availability of DGA
and frame buffer devices: CLASSICAL OVERLAY IS DISABLED !
*** GRABBER DEVICE TYPE = v4l2
*** MIXER DEVICE TYPE = alsa
Can't open config file /home/origine/.xdtv/xdtvrc:writing a default one.
Please edit /home/origine/.xdtv/xdtvrc to suit your needs
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
MMX, SSE, AMD MMX extensions, SSE2, have been detected.
load_memcpy_method: can't open /home/origine/.xdtv/memcpy_method
Benchmarking memcpy methods (smaller is better):
3- Lorsque je lance xdtv et que je fait "Scan TV(xterm)" dans la section "Editeur de canaux" et dans la konsole ca se termine comme ca:
WARNING: video memory base unknown, may be caused by a problem
with xdtv_v4l-conf or a non-availability of DGA
and frame buffer devices: CLASSICAL OVERLAY IS DISABLED !
*** GRABBER DEVICE TYPE = v4l2
*** MIXER DEVICE TYPE = alsa
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
MMX, SSE, AMD MMX extensions, SSE2, have been detected.
Method sse
(Rien d'anormal je dirais...)
4- Lorsque je lance "xdtv_scantv -c /dev/video0" ou "xdtv_scantv -C /dev/vbi0" j'ai bien une ou deux frequences de trouver, mais apres tout s'arrete, je retourne a la konsole.
Choisissez une table de fréquence
0: ntsc-us-bcast
1: ntsc-us-cable
2: ntsc-japan-bcast
3: ntsc-japan-cable
4: secam-france
5: secam-russia
6: pal-europe-west
7: pal-europe-east
8: pal-italy
9: pal-newzealand
10: pal-australia
11: pal-ireland
12: pal-argentina
13: pal-china-bcast
14: pal-southafrica
15: pal-australia-optus
16: ntsc-cable-hrc
nombre ? 4
canal=SE6 freq=140,250 nom de la chaîne=inconnu (SE6)
canal=22 freq=479,250 nom de la chaîne=inconnu (22)
Vectoria ~ #
J'ai apporte le maximum de precision, si quelqu'un pouvait m'aider svp. Merci.