Bonjour à tous,
Je voudrais installer le driver de ma carte ethernet, le mode opératoire est le suivant:
Installing Source RPM Package
=============================

1. Install the source RPM package:

rpm -ivh bcm4400-<version>.src.rpm

If installing the driver on SuSE Linux, refer to the Notes section below
before continuing.

2. CD to the RPM path and build the binary driver for your kernel:

cd /usr/src/{redhat,OpenLinux,turbo,packages,rpm ..}
rpm -bb SPECS/bcm4400.spec

or

rpmbuild -bb SPECS/bcm4400.spec (for RPM version 4.x.x)

Note that the RPM path is different for different Linux distributions.

3. Install the newly built package (driver and man page):

rpm -ivh RPMS/i386/bcm4400-<version>.i386.rpm

The driver will be installed in the following path:

2.2.x kernels:

/lib/modules/<kernel_version>/net/bcm4400.o

2.4.x kernels:

/lib/modules/<kernel_version>/kernel/drivers/net/bcm4400.o

4. Load the driver:

insmod bcm4400

5. To configure network protocol and address, refer to various Linux
documentations.

Jusqu'au .2 ça va, j'ai mon fichier bcm4400.spec, mais après je sais pas quoi faire, quand je fais "rpmbuild -bb SPECS/bcm4400.spec" il me dit: "rpmbuild command not find"
Que faire?

Poste le Tuesday 27 April 2004 16:43:59