Bonjour à tous !!

Assidu à windows depuis 10 ans (par obligation), je viens de franchir le pas Linuxien en installant Mandriva 2006 sur mon portable...et j'en suis très content !!! (je ne demande qu'a apprendre !!)

L'install s'est parfaitement éffectuée (meme le wi-fi a été parametré sans problemes, mieux que sous XP !!!!)
Seul hic, quand je veux rebooter, lorsque je ferme ma session, Linux se "decharge" (je sais pas si c'est le bon terme...) correctement, mais a l'apparition du message "please wait while rebooting" (ou qque chose comme ca), plus rien ne se passe...ecran noir, et pas de reboot. En soi, rien de très grave, je fais un reboot manuel, mais bon, j'aimerai bien que tout marche bien moi !!

J'ai entendu parler de problemes de gestion de l'ACPI avec des portables, mais je ne sais pas trop configurer ca avec linux (total Newbie...)

Ma config: portable Sony vgn A517B, pentium M 740 (1,80 ghz), 512 ddr2, DD 80go, ati radeon mobility X600, lecteur/graveur DVD.

Mes partitions:
c: 15 go NTFS - partition XP
d: 40 go NTFS - partition linux (linux, /home, et swap) et stockages données "non éxécutables" (musique, films, iso...)
g: 10 go FAT32 - partition pour échanges linux/xp


voila, en esperant pouvoir resoudre ce probleme...je suis ouvert a toutes vos suggestions !! (pas trop complexes par pitié, je maitrise l'environnement windows, mais total newbie - qui ne demande qu'a apprendre - sous Linux)

Dams

Je precise que ce probleme ne s'applique qu'a la fonction redemarrer, l'extinction du PC fonctionne très bien !!

@+

Dams

tu pourrais nous donner les information de la commande "dmesg" pour voir et peut être comprendre le problème...

okay, voici les infos de DMESG


Linux version 2.6.12-12mdk (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5
mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 18:15:22 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
BIOS-e820: 000000001ffc0000 - 000000001ffcf000 (ACPI data)
BIOS-e820: 000000001ffcf000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
NX (Execute Disable) protection: active
On node 0 totalpages: 131008
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126912 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 SONY ) @ 0x000f6910
ACPI: RSDT (v001 SONY F2 0x20050701 MSFT 0x00000097) @ 0x1ffc0000
ACPI: FADT (v002 SONY F2 0x20050701 MSFT 0x00000097) @ 0x1ffc0200
ACPI: MADT (v001 SONY F2 0x20050701 MSFT 0x00000097) @ 0x1ffc0390
ACPI: MCFG (v001 SONY F2 0x20050701 MSFT 0x00000097) @ 0x1ffc03f0
ACPI: OEMB (v001 SONY F2 0x20050701 MSFT 0x00000097) @ 0x1ffcf040
>>> ERROR: Invalid checksum
ACPI: SSDT (v001 SONY F2 0x20050701 INTL 0x02002026) @ 0x1ffc5920
ACPI: DSDT (v001 SONY F2 0x20050701 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux root=808 resume=/dev/sda7 splash=silent
bootsplash: silent mode.
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1729.887 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514616k/524032k available (2348k kernel code, 8920k reserved, 717k data,
268k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3424.25 BogoMIPS (lpj=1712128)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180
00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 0
0000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 0000000
0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 259k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1151583712.513:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 6144k, total 1310
08k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:59c3
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found
.
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SONY DVD RW DW-Q58A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
ACPI wakeup devices:
P0P2 GLAN EC0 EUSB USB1 USB2 USB3 USB4 PWRB
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard on isa0060/serio0
SCSI subsystem initialized
libata version 1.11 loaded.
ahci version 1.00
ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 17 (level, low) -> IRQ 17
alps.c: Enabling hardware tapping
input: PS/2 Mouse on isa0060/serio1
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode
ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part
ata1: SATA max UDMA/133 cmd 0xE081CD00 ctl 0x0 bmdma 0x0 irq 17
ata2: SATA max UDMA/133 cmd 0xE081CD80 ctl 0x0 bmdma 0x0 irq 17
ata3: SATA max UDMA/133 cmd 0xE081CE00 ctl 0x0 bmdma 0x0 irq 17
ata4: SATA max UDMA/133 cmd 0xE081CE80 ctl 0x0 bmdma 0x0 irq 17
ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:4023 85:f469 86:3e49 87:4023 88:203f
ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : ahci
ata2: no device found (phy stat 00000000)
scsi1 : ahci
ata3: no device found (phy stat 00000000)
scsi2 : ahci
ata4: no device found (phy stat 00000000)
scsi3 : ahci
Vendor: ATA Model: HTS541080G9SA00 Rev: MB4O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 M
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 M
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p2 p3 < p5 p6 p7 p8 p9 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 268k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000dc00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
usb 1-1: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e080
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ts: Compaq touchscreen protocol output
usb 1-1: USB disconnect, address 2
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-2: new low speed USB device using uhci_hcd and address 5
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 4-2: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-00
00:00:1d.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
EXT3 FS on sda8, internal journal
Adding 2072344k swap on /dev/sda7. Priority:-1 extents:1
Non-volatile memory driver v1.2
hw_random: RNG not detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ntfs: Ignoring new-style parameters in presence of obsolete ones
NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: loaded (max 8 devices)
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 23 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[feafe800-feafefff] Max
Packet=[2048]
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 260 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [ATF0] (66 C)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
Yenta: CardBus bridge found at 0000:02:01.0 [104d:818f]
Yenta: ISA IRQ mask 0x0cf8, PCI irq 21
Socket status: 30000006
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460300f130d9]
eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x377 0x480-0x4bf 0x4
d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
floppy0: no floppy controllers found
floppy0: no floppy controllers found
NET: Registered protocol family 17
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xe11b6400, 00:01:4a:1d:b0:c7, IRQ 17
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.0.3
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
lp: driver loaded but no devices found
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c5760(lo)
IPv6 over IPv4 tunneling driver
r8169: eth0: PHY reset until link up
[drm] Initialized drm 1.0.0 20040925
eth0: no IPv6 routers present
eth2: no IPv6 routers present
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
[damien@nom-4da1615194c ~]$


voila, je ne sais pas trop regarder la dedans, je suis total newbie en Linux...mais ouvert a tout apprentissage et conseils !!

Dams

peut etre un probleme d'ACPI ? mais celui ci est activé...

Dams