Conversation
precedente ou
suivante
Debutant perdu et configuration de kernel...
Envoyé par:
pokk
Sahut,
ca va paraitre bete, mais bon, y a que les imbeciles qui ne posent pas de questions qui le restent...
Je viens juste de'installer la slackware 10, et je voudrais bien recompiler mon noyau, histoire de voir si mon pc peut fonctionner un peu mieux que ce qu'il ne fait a l'heure actuelle. Sof que voila lorsque je fais un make xconfig, je me retrouve devant quatcentmilles questions ou honetement j'ai pas idee quoi repondre.
Je me suis bien dit que j'allais partir du .config existant, sauf qu'il semblerait que le bouzier de kernel qui c'est installe au depart, y soit vraiment hyper generique (ex: cpu 486, alors que a priori j'aurais plutot un peu mieux).
Komment ki fo faire???
Merci pour votre aide, j'en ai vraiment besoin.
Pokk
au cas ou z'ou, ma config:
Portable HP Pavilion ze4111s
CPU: intel mobile celeron 1,6GHz (family 15, model 2, stepping 7, 256k de cache)
DVD/Graveur CD Sony (modele???)
la sortie de lspci -v et de dmesg plus bas:
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
Flags: bus master, 66Mhz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable)
Memory at e4005000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e4300000-e43fffff
Prefetchable memory behind bridge: ec000000-efffffff
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e4000000 (32-bit, non-prefetchable)
Capabilities: [60] Power Management version 2
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at 1000
Memory at e4001000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: [a0] Power Management version 1
00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel, IRQ 10
Memory at e4002000 (32-bit, non-prefetchable)
I/O ports at 1400
Capabilities: [40] Power Management version 2
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at e4003000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176
Memory window 0: e4200000-e42ff000 (prefetchable)
Memory window 1: e4100000-e41ff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00001800-000018ff
16-bit legacy interface ports at 0001
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 32
I/O ports at 2000
Capabilities: [60] Power Management version 2
00:11.0 Bridge: ALi Corporation M7101 PMU
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: Unknown device 3c08:5400
Flags: bus master, medium devsel, latency 90, IRQ 10
I/O ports at 2400
Memory at e4004000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 10
Memory at ec000000 (32-bit, prefetchable)
I/O ports at 9000
Memory at e4300000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
Flags: bus master, 66Mhz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable)
Memory at e4005000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e4300000-e43fffff
Prefetchable memory behind bridge: ec000000-efffffff
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e4000000 (32-bit, non-prefetchable)
Capabilities: [60] Power Management version 2
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at 1000
Memory at e4001000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: [a0] Power Management version 1
00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel, IRQ 10
Memory at e4002000 (32-bit, non-prefetchable)
I/O ports at 1400
Capabilities: [40] Power Management version 2
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at e4003000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176
Memory window 0: e4200000-e42ff000 (prefetchable)
Memory window 1: e4100000-e41ff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00001800-000018ff
16-bit legacy interface ports at 0001
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 32
I/O ports at 2000
Capabilities: [60] Power Management version 2
00:11.0 Bridge: ALi Corporation M7101 PMU
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: Unknown device 3c08:5400
Flags: bus master, medium devsel, latency 90, IRQ 10
I/O ports at 2400
Memory at e4004000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 10
Memory at ec000000 (32-bit, prefetchable)
I/O ports at 9000
Memory at e4300000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
et maintenant mseg:
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1836.800 MB/sec
32regs : 1198.000 MB/sec
pIII_sse : 2063.600 MB/sec
pII_mmx : 1865.200 MB/sec
p5_mmx : 1852.000 MB/sec
raid5: using function: pIII_sse (2063.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 128k freed
Adding Swap: 511520k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 176M
agpgart: Detected ATI IGP330/340/345/350/M chipset
agpgart: AGP aperture is 64M @ 0xe8000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
PCI: Enabling device 00:0a.0 (0000 -> 0002)
Yenta ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f
cs: IO port probe 0x0a00-0x0aff: clean.
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
originally by Donald Becker <becker@scyld.com>
[www.scyld.com]
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
eth0: NatSemi DP8381[56] at 0xce8b0000, 00:c0:9f:1b:03:a6, IRQ 10.
eth0: autonegotiation did not complete in 4000 usec.
PCI: Enabling device 00:06.0 (0005 -> 0007)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xce8fc000, IRQ 10
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:02.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x1110/0x9010) is not claimed by any active driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 17:55:05 Jun 13 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
[eagle-usb] driver V1.9.9 loaded
usb.c: registered new driver eagle-usb
[eagle-usb] New pre-firmware modem detected
[eagle-usb] Uploading firmware..
[eagle-usb] Binding eu_instance_t to USB 001/002
usb.c: USB disconnect on device 00:02.0-2 address 2
[eagle-usb] Pre-firmware modem removed
hub.c: new USB device 00:02.0-2, assigned address 3
[eagle-usb] New USB ADSL device detected, waiting for DSP code...
[eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-003
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
eth0: remaining active for wake-on-lan
mtrr: no more MTRRs available
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
[eagle-usb] Modem operational !!
[eagle-usb] Ethernet device eth1 created.
eth0: autonegotiation did not complete in 4000 usec.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
eth0: remaining active for wake-on-lan
Sony CDU-535: probing base address 340
Did not find a Sony CDU-535 drive
sbpcd-0 [01]: sbpcd.c v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000
sbpcd-0 [02]: Scanning 0x340 (LaserMate)...
sbpcd-0 [03]: Scanning 0x340 (SoundBlaster)...
sbpcd-0 [04]: No drive found.
sbpcd-0 [01]: sbpcd.c v4.63 Andrew J. Kroll
mcd: initialisation failed - No mcd device at 0x300 irq 11
SJCD: Sanyo CDR-H94A cdrom driver version 1.7.
SJCD: Resetting: .......... reset failed, no drive found.
Trying to free nonexistent resource <00000340-00000343>
cm206 cdrom driver $Revision: 1.5 $ can't find adapter!
reset failed, no drive found.
Trying to free nonexistent resource <00000340-00000343>
cm206 cdrom driver $Revision: 1.5 $ can't find adapter!
[EAGLE-USB] eu_irq : URB status indicates error (-110)
usb.c: USB disconnect on device 00:02.0-2 address 3
[eagle-usb] eu_irq : URB canceled by user.
[eagle-usb] ADSL device removed
hub.c: new USB device 00:02.0-2, assigned address 4
[eagle-usb] New pre-firmware modem detected
[eagle-usb] Uploading firmware..
[eagle-usb] Binding eu_instance_t to USB 001/004
usb.c: USB disconnect on device 00:02.0-2 address 4
[eagle-usb] Pre-firmware modem removed
hub.c: new USB device 00:02.0-2, assigned address 5
[eagle-usb] New USB ADSL device detected, waiting for DSP code...
[eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-005
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
[eagle-usb] Modem operational !!
[eagle-usb] Ethernet device eth1 created.
eth0: autonegotiation did not complete in 4000 usec.
eth0: remaining active for wake-on-lan
i8253 count too high! resetting..
ca va paraitre bete, mais bon, y a que les imbeciles qui ne posent pas de questions qui le restent...
Je viens juste de'installer la slackware 10, et je voudrais bien recompiler mon noyau, histoire de voir si mon pc peut fonctionner un peu mieux que ce qu'il ne fait a l'heure actuelle. Sof que voila lorsque je fais un make xconfig, je me retrouve devant quatcentmilles questions ou honetement j'ai pas idee quoi repondre.
Je me suis bien dit que j'allais partir du .config existant, sauf qu'il semblerait que le bouzier de kernel qui c'est installe au depart, y soit vraiment hyper generique (ex: cpu 486, alors que a priori j'aurais plutot un peu mieux).
Komment ki fo faire???
Merci pour votre aide, j'en ai vraiment besoin.
Pokk
au cas ou z'ou, ma config:
Portable HP Pavilion ze4111s
CPU: intel mobile celeron 1,6GHz (family 15, model 2, stepping 7, 256k de cache)
DVD/Graveur CD Sony (modele???)
la sortie de lspci -v et de dmesg plus bas:
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
Flags: bus master, 66Mhz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable)
Memory at e4005000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e4300000-e43fffff
Prefetchable memory behind bridge: ec000000-efffffff
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e4000000 (32-bit, non-prefetchable)
Capabilities: [60] Power Management version 2
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at 1000
Memory at e4001000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: [a0] Power Management version 1
00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel, IRQ 10
Memory at e4002000 (32-bit, non-prefetchable)
I/O ports at 1400
Capabilities: [40] Power Management version 2
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at e4003000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176
Memory window 0: e4200000-e42ff000 (prefetchable)
Memory window 1: e4100000-e41ff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00001800-000018ff
16-bit legacy interface ports at 0001
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 32
I/O ports at 2000
Capabilities: [60] Power Management version 2
00:11.0 Bridge: ALi Corporation M7101 PMU
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: Unknown device 3c08:5400
Flags: bus master, medium devsel, latency 90, IRQ 10
I/O ports at 2400
Memory at e4004000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 10
Memory at ec000000 (32-bit, prefetchable)
I/O ports at 9000
Memory at e4300000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
Flags: bus master, 66Mhz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable)
Memory at e4005000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e4300000-e43fffff
Prefetchable memory behind bridge: ec000000-efffffff
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e4000000 (32-bit, non-prefetchable)
Capabilities: [60] Power Management version 2
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at 1000
Memory at e4001000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: [a0] Power Management version 1
00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel, IRQ 10
Memory at e4002000 (32-bit, non-prefetchable)
I/O ports at 1400
Capabilities: [40] Power Management version 2
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at e4003000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176
Memory window 0: e4200000-e42ff000 (prefetchable)
Memory window 1: e4100000-e41ff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00001800-000018ff
16-bit legacy interface ports at 0001
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, medium devsel, latency 32
I/O ports at 2000
Capabilities: [60] Power Management version 2
00:11.0 Bridge: ALi Corporation M7101 PMU
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: medium devsel
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: Unknown device 3c08:5400
Flags: bus master, medium devsel, latency 90, IRQ 10
I/O ports at 2400
Memory at e4004000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 002a
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 10
Memory at ec000000 (32-bit, prefetchable)
I/O ports at 9000
Memory at e4300000 (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
et maintenant mseg:
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1836.800 MB/sec
32regs : 1198.000 MB/sec
pIII_sse : 2063.600 MB/sec
pII_mmx : 1865.200 MB/sec
p5_mmx : 1852.000 MB/sec
raid5: using function: pIII_sse (2063.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 128k freed
Adding Swap: 511520k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 176M
agpgart: Detected ATI IGP330/340/345/350/M chipset
agpgart: AGP aperture is 64M @ 0xe8000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
PCI: Enabling device 00:0a.0 (0000 -> 0002)
Yenta ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f
cs: IO port probe 0x0a00-0x0aff: clean.
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
originally by Donald Becker <becker@scyld.com>
[www.scyld.com]
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
eth0: NatSemi DP8381[56] at 0xce8b0000, 00:c0:9f:1b:03:a6, IRQ 10.
eth0: autonegotiation did not complete in 4000 usec.
PCI: Enabling device 00:06.0 (0005 -> 0007)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xce8fc000, IRQ 10
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:02.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x1110/0x9010) is not claimed by any active driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 17:55:05 Jun 13 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
[eagle-usb] driver V1.9.9 loaded
usb.c: registered new driver eagle-usb
[eagle-usb] New pre-firmware modem detected
[eagle-usb] Uploading firmware..
[eagle-usb] Binding eu_instance_t to USB 001/002
usb.c: USB disconnect on device 00:02.0-2 address 2
[eagle-usb] Pre-firmware modem removed
hub.c: new USB device 00:02.0-2, assigned address 3
[eagle-usb] New USB ADSL device detected, waiting for DSP code...
[eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-003
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
eth0: remaining active for wake-on-lan
mtrr: no more MTRRs available
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
[eagle-usb] Modem operational !!
[eagle-usb] Ethernet device eth1 created.
eth0: autonegotiation did not complete in 4000 usec.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
eth0: remaining active for wake-on-lan
Sony CDU-535: probing base address 340
Did not find a Sony CDU-535 drive
sbpcd-0 [01]: sbpcd.c v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000
sbpcd-0 [02]: Scanning 0x340 (LaserMate)...
sbpcd-0 [03]: Scanning 0x340 (SoundBlaster)...
sbpcd-0 [04]: No drive found.
sbpcd-0 [01]: sbpcd.c v4.63 Andrew J. Kroll
mcd: initialisation failed - No mcd device at 0x300 irq 11
SJCD: Sanyo CDR-H94A cdrom driver version 1.7.
SJCD: Resetting: .......... reset failed, no drive found.
Trying to free nonexistent resource <00000340-00000343>
cm206 cdrom driver $Revision: 1.5 $ can't find adapter!
reset failed, no drive found.
Trying to free nonexistent resource <00000340-00000343>
cm206 cdrom driver $Revision: 1.5 $ can't find adapter!
[EAGLE-USB] eu_irq : URB status indicates error (-110)
usb.c: USB disconnect on device 00:02.0-2 address 3
[eagle-usb] eu_irq : URB canceled by user.
[eagle-usb] ADSL device removed
hub.c: new USB device 00:02.0-2, assigned address 4
[eagle-usb] New pre-firmware modem detected
[eagle-usb] Uploading firmware..
[eagle-usb] Binding eu_instance_t to USB 001/004
usb.c: USB disconnect on device 00:02.0-2 address 4
[eagle-usb] Pre-firmware modem removed
hub.c: new USB device 00:02.0-2, assigned address 5
[eagle-usb] New USB ADSL device detected, waiting for DSP code...
[eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-005
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
[eagle-usb] Modem operational !!
[eagle-usb] Ethernet device eth1 created.
eth0: autonegotiation did not complete in 4000 usec.
eth0: remaining active for wake-on-lan
i8253 count too high! resetting..
Poste le Thursday 23 September 2004 23:03:00
Re: Debutant perdu et configuration de kernel...
Envoyé par:
fraazz
Dans /usr/src/linux-version, tu as un fichier caché nommé .config , copie le.
Lors du make xconfig, à la fin tu as "Load an alternate configuration file", il te suffit d'indiquer le chemin du .config sauvegardé et le fichier de configuration du noyau actuel sera chargé.
Modifie uniquement les points dont tu es certain (type processeur, ...) et que tu comprends.
Pour une explication (en français) de toutes les options, tu peux dl le YAGIL disponible à :
[casteyde.christian.free.fr]
Pour kernel-2.6 cependant ...
bon courage
fraazz
Lors du make xconfig, à la fin tu as "Load an alternate configuration file", il te suffit d'indiquer le chemin du .config sauvegardé et le fichier de configuration du noyau actuel sera chargé.
Modifie uniquement les points dont tu es certain (type processeur, ...) et que tu comprends.
Pour une explication (en français) de toutes les options, tu peux dl le YAGIL disponible à :
[casteyde.christian.free.fr]
Pour kernel-2.6 cependant ...
bon courage
fraazz
Poste le Friday 24 September 2004 12:37:16
Re: Debutant perdu et configuration de kernel...
Envoyé par:
marc ferraton
J'ai installé un ze4111s au mois d'avril en slackware 9.1, les 2 seuls points critiques ont été :
- le modem intégré (ALi Corporation Intel 537),
- le multiboot avec XP (j'utilise le bootloader de XP)
je n'ai pas le .config disponible à cet instant, et je dois changer la version de 9.1 en 10.0 dans qques jours (début octobre) si tu es interessé
postes-moi un petit mail privé
A+
- le modem intégré (ALi Corporation Intel 537),
- le multiboot avec XP (j'utilise le bootloader de XP)
je n'ai pas le .config disponible à cet instant, et je dois changer la version de 9.1 en 10.0 dans qques jours (début octobre) si tu es interessé
postes-moi un petit mail privé
A+
Poste le Saturday 25 September 2004 00:14:48
Re: Debutant perdu et configuration de kernel...
Envoyé par:
gza
bonsoir , j'ai un vieux portable sans carte reseau sur le quel jai mis drinou .
je pensais pouvoir utiliser Slip pour l'inclure a mon reseau mais visiblement ce programe n'existe plus nulle part (la commande ne repond pas ; d'ailleur elle ne repond pas sur knoppix non plus ) est-ce normal ,peuton trouver ce logiciel dans un atre paquet ou bien c'etais uniquement avec le noyau 2.0 ??? pourtan il y a bien une option dans les noyeau 2.4 , me trompe-je??
je pensais pouvoir utiliser Slip pour l'inclure a mon reseau mais visiblement ce programe n'existe plus nulle part (la commande ne repond pas ; d'ailleur elle ne repond pas sur knoppix non plus ) est-ce normal ,peuton trouver ce logiciel dans un atre paquet ou bien c'etais uniquement avec le noyau 2.0 ??? pourtan il y a bien une option dans les noyeau 2.4 , me trompe-je??
Poste le Monday 31 January 2005 02:42:21
Re: Debutant perdu et configuration de kernel...
Envoyé par:
marc ferraton
il faut utiliser la commande slattach (en root bien entendu),
regardes le man et si tu as des pb ouvres un nouveau sujet au lieu d'utiliser celui-ci...
L'homme qui parlait à l'oreille des PC @#%!
regardes le man et si tu as des pb ouvres un nouveau sujet au lieu d'utiliser celui-ci...
L'homme qui parlait à l'oreille des PC @#%!
Poste le Monday 31 January 2005 10:24:30
Ce forum !
Debutant perdu et configuration de kernel...
Aide aux utilisateurs de la distribution Slackware et ses dérivées : Slax, Vector
Sauf mention contraire, les documentations publiées sont sous licence Creative-Commons