Bonjour,
j'ai un probleme pour installer ma carte réseau dans mandrake 10
j'ai une carte embarquée sur une carte mere ASUS A8V-E SE.
je me suis débrouillé pour trouver le pilote linux pour cette carte.
le pilote en question est : install-7_04.tar.bz2 pour sk98lin.
a ce pilote est join un fichier texte sensé donné la marche a suivre pour l'installation.
3 Prerequisites
================
The prerequisites for compilation, loading and patch creation of the
sk98lin driver are:
- Any device using the sk98lin kernel module needs to be closed.
- The old sk98lin kernel module needs to be unloaded.
Per default the installation script will do this automatically
(if "user mode" installation is selected).
If you want to shutdown and unload the old sk98lin kernel module
manually, run the script in "expert installation" mode.
- Your system has to be equipped with a supported network card.
Without a card the full driver functionality cannot be checked.
- The kernel source and kernel version have to be consistent.
For instance, it might be, that you run kernel version 2.4.20, but
the header files the kernel module will be compiled with refer to
kernel version 2.4.21. If you don't have the same kernel version,
install the sources and compile a new kernel. It's not possible to
mix different kernel versions!
***
4 Preparing the Driver Installation Package
============================================
Before the sk98lin driver installation script can be invoked, the
installation package needs to be unpacked:
1. Login as 'root'.
2. Unpack the driver installation package using the command
# tar xfvj install-???.tar.bz2
or
# bunzip2 -c install-???.tar.bz2 | tar xfv -
***
5 Driver Installation
======================
1. After the driver installation package is unpacked, type the following
commands to start the sk98lin driver build process:
# cd DriverInstall
# ./install.sh
2. Select the driver installation mode (see following subchapters).
3. Wait for the driver build process to finish.
Depending on the installation mode you selected, the driver is either
compiled and installed or a kernel patch is generated.
***
5.1 User Installation Mode
---------------------------
Selecting this installation mode the driver sources shipped
with the install package are compiled and the resulting driver
module object file is installed to a suitable location (usually somewhere
below directory /lib/modules/...).
No source files of the driver are installed into a kernel directory.
Only the driver module object file and the man page of the driver are
installed onto your system permanently.
The term "user installation" reflects the fact that the build
process runs automatically without any user interaction. In case
of installation problems, the driver installation script autonomously
tries to solve the problem (if this is possible).
After compilation has finished, the initial system state and
configuration is recovered and all (possibly) backed-up system
files are restored from the initial configuration.
j'ai tout bien suivi à la lettre, mais l'ors de l'install mandrake me dit ceci.
Create tmp dir (/tmp/Sk98IenbEnmErOhaPnHfcNUef) [ OK ]
Check user id (0) [ OK ]
Check kernel version (2.6.3-7mdk) [ OK ]
Check kernel symbol file (/proc/kallsyms) [ OK ]
Check kernel type working
Check kernel type (SP) [ OK ]
Check architecture (found) [ OK ]
Set architecture (i386) [ OK ]
Check compilerwhich: no gcc in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin)
(not found) [ failed ]
./install.sh: line 488: inst_failed: command not found
Check mcmodel flags (32bit) [ OK ]
Check module support (/sbin/insmod) [ OK ]
Check make (/usr/bin/make) [ OK ]
Check archive file (sk98lin) [ OK ]
Check kernel gcc version (3.3.2)which: no gcc in (/sbin:/usr/sbin:/bin:/usr/bin: /usr/X11R6/bin:/usr/local/bin:/usr/local/sbin)
(Kernel:3.3.2 != gcc:1 [ failed ]
There is a version mismatch between the compiler that was used
to build the current running kernel and the compiler which you
intend to compile the kernel module with. In most of the cases,
this is no problem, but there are cases in which this compiler-
mismatch leads to unexpected system crashes
If you know what you are doing and want to override this
check, you can do so by setting IGNORE_CC_MISMATCH system
variable:
Example: export IGNORE_CC_MISMATCH=1
Installation of sk98lin driver module failed.
Delete temp directories (done)[ OK ]
Voila apres ca je suis completement coincé. QUELQU'UN PEUT M'AIDER sVP ?