voilà, gmplayer crash en user, pas en root :
voilà :
[patrick@localhost patrick]$ gmplayer
MPlayer 1.0pre2-3.3.1 (C) 2000-2003 MPlayer Team
CPU: Advanced Micro Devices Athlon Thunderbird 1323 MHz (Family: 6, Stepping:
2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled with Runtime CPU Detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection
Reading config file /etc/mplayer/mplayer.conf
Reading config file /home/patrick/.mplayer/config
[cfg] read config file: /home/patrick/.mplayer/gui.conf
Reading config file /home/patrick/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Disabling DPMS
Reading /home/patrick/.mplayer/codecs.conf: Can't open
'/home/patrick/.mplayer/c odecs.conf': No such
file or directory
Reading /etc/mplayer/codecs.conf: 61 audio & 157 video codecs
font: can't open file: /home/patrick/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Using usleep() timing
Can't open input config file /home/patrick/.mplayer/input.conf: No such file
or directory
Input config file /etc/mplayer/input.conf parsed: 52 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
SKIN dir 1: '/home/patrick/.mplayer/Skin'
SKIN dir 2: '/usr/share/mplayer/Skin'
ca doit venir de la non ?
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
je fais quoi ? je rajoute : echo 1024 > /proc/sys/dev/rtc/max-user-freq
dans modules.conf ?
houpsssss ... veut pas tout casser