bonjour,

Je viens d'installer Mandriva 2006 à la place de Mandrake 10. Sur la version précédente, j'avais réussi à installer mon modem usb sagem800.
Mais avec Mandriva2006, grosse galère, ça fait 2 jours que j'essaie sans résultat, et comme je suis pas un spécialiste...
J'ai parcouru les forums sur le nets, mais les solutions proposées sont d'installer une version d'eagle pour les versions Mandrake antérieures à 2006 (ce que j'avais fait pour ma version 10.) Et il paraît qu'avec la 2006, ça serait plus simple !
Lorsque j'ai installé la 2006, le pc a reconnu que j'avais un modem sagem usb, mais après plus rien. Il n'aparrait pas dans mes matériels et impossible de se connecter.
Ci-joint quelques messages :

[root@localhost frederic]# eaglestat
eagle-usb status display
-------------------------------------------------------------
Driver version 2.2.0 Chipset: Eagle0
Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
USB Bus : 001 USB Device : 003 Dbg mask: 0x0
Ethernet Interface : <NULL>
MAC: 00:60:4c:44:57:12
Tx Rate 0 Rx Rate 0
FEC 0 Margin 0 Atten 0 dB
VID-CPE 0 VID-CO 0 HEC 0
VPI 0 VCI 0 Delin GOOD
Cells Tx 0 Cells Rx 0
Pkts Tx 0 Pkts Rx 0
OAM 0 Bad VPI 0 Bad CRC 0
Oversiz. 0

Modem waiting for driver response.
Please send DSP (eaglectrl -d)



[root@localhost frederic]# eaglediag
Diagnostic (1.22 2005/03/20) driver eagle-usb 20060321132802
# System Information
Linux localhost 2.6.12-12mdk #1 Fri Sep 9 18:15:22 CEST 2005 i686 AMD Athlon™
XP 1700+ unknown GNU/Linux
Mandriva Linux release 2006.0 (Official) for i586
Linux version 2.6.12-12mdk (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5
mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 18:15:22 CEST 2005
gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0) used : 4.0.1 (4
.0.1-5mdk for Mandriva Linux release 2006.0)
# module loaded ? [ OK ]
# modem operational ? [ KO ]
# Config vpi/vci/encapsulation/isp : 8 23 6 (pppoa) FR08
# pppd launched ? [ KO ]
# ping IP ? [ KO ]
# test DNS resolution ? [ KO ]
##Complete diagnostic has been saved on /var/log/eagle-usb/eagle_diag_2006032113
2802.txt
##Please keep only relevant data and remove personal informations.


[root@localhost frederic]# modprobe eagle-usb
[root@localhost frederic]# dmesg |tail -20
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b
ytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b ytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b ytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 b ytes, v3).
bootsplash: status on console 5 changed to on
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '2006.0-Disc1', timestamp 2 005/11/03 10:36 (103c)
[root@localhost frederic]# eaglediag
Diagnostic (1.22 2005/03/20) driver eagle-usb 20060321133658
# System Information
Linux localhost 2.6.12-12mdk #1 Fri Sep 9 18:15:22 CEST 2005 i686 AMD Athlon™ XP 1700+ unknown GNU/Linux
Mandriva Linux release 2006.0 (Official) for i586
Linux version 2.6.12-12mdk (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 18:15:22 CEST 2005
gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0) used : 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)
# module loaded ? [ OK ]
# modem operational ? [ KO ]
# Config vpi/vci/encapsulation/isp : 8 23 6 (pppoa) FR08
# pppd launched ? [ KO ]
# ping IP ? [ KO ]
# test DNS resolution ? [ KO ]
##Complete diagnostic has been saved on /var/log/eagle-usb/eagle_diag_20060321133658.txt
##Please keep only relevant data and remove personal informations.
[root@localhost frederic]# modprobe eagle-usb
[root@localhost frederic]# dmesg |tail -20
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '2006.0-Disc1', timestamp 2005/11/03 10:36 (103c)
usb 1-2: USB disconnect, address 3
[eagle-usb] ADSL device removed
usb 1-2: new full speed USB device using uhci_hcd and address 6
[eagle-usb] New pre-firmware modem detected
[eagle-usb] Uploading firmware..
[eagle-usb] Binding eu_instance_t to USB 001/006
usb 1-2: USB disconnect, address 6
[eagle-usb] Pre-firmware modem removed
usb 1-2: new full speed USB device using uhci_hcd and address 7
[eagle-usb] New USB ADSL device detected, waiting for DSP code...
[eagle-usb] Interface 0 accepted.
[eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-007


[root@localhost eagle-usb]# eaglectrl -d
Can't find any PRE or POST firmware devices.
Is your device plugged in ?


Texte à mettre en gras Merci de votre aide.