Bonjour,
amis Linuxiens


Je viens d'avoir un souci avec ma mandrake 10.00 Official
Mon problème est le suivant:

Au démarrage mandrake liste les procédures et jen ai une qui plante.

Recherches de périfériques [Echec]

je ne vois pas pourquoi, car je n'ai touché à rien ?????!!!

quelqu'un peut il m'aider ?

par avance, merci

didier

dans un shell tu peux faire :
# dmesg
et copier/coller la sortie ici stp ?

Bonjour,


c'est quoi ta commande # dmesg
??

j'ai un listing qui s'affiche concernant Shorewall


didier

Salut,
en faite, # est l'invite de commande de l'utilisateur root. Cette commande est tout à fait réalisable en tant que simple utilisateur (qui à pour invite $). Elle va afficher tous les messages qui défile lors du lancement.
De manière plus génèral, pour avoit des infos sur commande tapes: man nom_commande.

voici ce qui sort en Konsole:

Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandr
ake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
BIOS-e820: 000000000eff0000 - 000000000eff3000 (ACPI NVS)
BIOS-e820: 000000000eff3000 - 000000000f000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
239MB LOWMEM available.
On node 0 totalpages: 61424
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 57328 pages, LIFO batch:13
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 00 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: BOOT_IMAGE=linux ro root=341 devfs=mount acpi=ht resume=/de
v/hdb5
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 498.374 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 239164k/245696k available (1816k kernel code, 5828k reserved, 849k data,
272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 987.13 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 107k freed
CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000
CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS [1039/0008] at 0000:00:01.0
vesafb: framebuffer at 0xd0000000, mapped to 0xcf800000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c805:0008
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19: looking for picture... no good signature found.
Console: switching to colour frame buffer device 100x37
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS540 ATA 66 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdbMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdcMA, hddMA
hdb: ST380011A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdb: max request size: 1024KiB
hdb: 156301488 sectors (80026 M w/2048KiB Cache, CHS=16383/255/63, UDMA(66)
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at [linux.dell.com]
Resume Machine: resuming from /dev/hdb5
Resuming from device hdb5
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Found IRQ 4 for device 0000:00:01.2
PCI: Sharing IRQ 4 with 0000:00:01.3
ohci_hcd 0000:00:01.2: OHCI Host Controller
ohci_hcd 0000:00:01.2: irq 4, pci mem d0805000
ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
PCI: Found IRQ 4 for device 0000:00:01.3
PCI: Sharing IRQ 4 with 0000:00:01.2
ohci_hcd 0000:00:01.3: OHCI Host Controller
ohci_hcd 0000:00:01.3: irq 4, pci mem d080c000
ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
usb 2-2: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr
oto 2 vid 0x04B8 pid 0x0005
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[eagle-usb] driver V1.9.5 loaded
[eagle-usb] New USB ADSL device detected, waiting for DSP code...
[eagle-usb] created proc entry at : /proc/driver/eagle-usb/002-002
drivers/usb/core/usb.c: registered new driver eagle-usb
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
EXT3 FS on hdb1, internal journal
Adding 1341388k swap on /dev/hdb5. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 540 chipset
agpgart: Maximum main memory to use for agp memory: 189M
agpgart: AGP aperture is 64M @ 0xd8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1919 buckets, 15352 max) - 300 bytes per conntrack
NET: Registered protocol family 17
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1919 buckets, 15352 max) - 300 bytes per conntrack
[eagle-usb] Modem operational !!
[eagle-usb] Ethernet device eth0 created.
[EAGLE-USB] EU_IO_OPTIONS : Eth device already open.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
es1371: version v0.32 time 15:45:33 Mar 17 2004
PCI: Found IRQ 11 for device 0000:00:0b.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xe400 irq 11 joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10j-
2.6, 15:45:43 Mar 17 2004
PCI: Found IRQ 5 for device 0000:00:01.4
trident: SiS 7018 PCI Audio found at IO 0xe000, IRQ 5
ac97_codec: AC97 Audio codec, id: CRY52 (Cirrus Logic CS4299 rev D)
NET: Registered protocol family 10
Disabled Privacy Extensions on device c035fe60(lo)
IPv6 over IPv4 tunneling driver
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
[drm] Initialized sis 1.1.0 20030826 on minor 0: SiS 540
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Shorewall:net2allROP:IN=ppp0 OUT= MAC= SRC=62.147.60.164 DST=62.147.169.119 LE N=48 TOS=0x00 PREC=0x00 TTL=122 ID=27032 DF PROTO=TCP SPT=4151 DPT=27374 WINDOW= 8192 RES=0x00 SYN URGP=0
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
SCSI subsystem initialized
st: Version 20040122, fixed bufsize 32768, s/g segs 256
Shorewall:net2allROP:IN=ppp0 OUT= MAC= SRC=62.147.60.164 DST=62.147.169.119 LE N=48 TOS=0x00 PREC=0x00 TTL=122 ID=63641 DF PROTO=TCP SPT=4151 DPT=27374 WINDOW= 8192 RES=0x00 SYN URGP=0
Shorewall:net2allROP:IN=ppp0 OUT= MAC= SRC=62.147.60.164 DST=62.147.169.119 LE N=48 TOS=0x00 PREC=0x00 TTL=122 ID=16797 DF PROTO=TCP SPT=4151 DPT=27374 WINDOW= 8192 RES=0x00 SYN URGP=0
Shorewall:net2allROP:IN=ppp0 OUT= MAC= SRC=62.147.60.164 DST=62.147.169.119 LE N=48 TOS=0x00 PREC=0x00 TTL=122 ID=52131 DF PROTO=TCP SPT=4151 DPT=27374 WINDOW= 8192 RES=0x00 SYN URGP=0
Shorewall:net2allROP:IN=ppp0 OUT= MAC= SRC=201.138.10.210 DST=62.147.169.119 L EN=48 TOS=0x00 PREC=0x00 TTL=106 ID=40671 DF PROTO=TCP SPT=1479 DPT=15118 WINDOW =32768 RES=0x00 SYN URGP=0
Shorewall:net2allROP:IN=ppp0 OUT= MAC= SRC=201.138.10.210 DST=62.147.169.119 L EN=48 TOS=0x00 PREC=0x00 TTL=106 ID=41252 DF PROTO=TCP SPT=1479 DPT=15118 WINDOW =32768 RES=0x00 SYN URGP=0


si quequn y voit une erreur
par avance merci