Léa-Linux : « Problème récupération HDD »

Conversation precedente ou suivante

Les sections > Les forums de cette section > Les messages de ce forum > Ce thread >

Problème récupération HDD

Envoyé par: Shogoki

Bonjour

Je viens vers vous pour voir si quelqu'un pouvait m'aider à comprendre ce qui arrive à mon disque dur.

J'ai 2 disques durs "en panne" venant d'un serveur web linux.

Pour essayer de récupérer les disques je les ai mis dans mon ordi perso (windows).

Quand je lance un live cd "partedmagic", mes disques persos sont reconnus et je peux les "mount" dans linux.

Néanmoins les disques "en panne" ne sont pas visible dans le "file manager" mais ils sont visibles dan le programme "disk health - gsmartcontrol".

1 des deux disques est "fail"
l'autre affiche "passed"
(je vais copier l'error log en dessous pour le passed)

Vu que je ne peux pas "mount" les disques en panne, je ne sais pas comment lancer le ddrescue dessus!

Pour info le disque en panne a "nom" /dev/sdc mais contrairement aux autres (disques sains de mon pc) il n'y a pas de 1 aprè le nom (sda1 et sdb1)

Que puis-je faire?

Merci à vous

PS : les disques tournent, ça ne doit pas être un prblème physique à mon avis
NB : sur windows, idem pas visible dans le gestionnaire de tache mais visible dans le gestionnaire de HDD (il me propose juste de le formater sad smiley

)

Poste le Tuesday 10 January 2012 18:20:05

Répondre Citer

Re: Problème récupération HDD

Envoyé par: Shogoki

Complete error log:

SMART Error Log Version: 1
ATA Error Count: 42959 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mmS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 42959 occurred at disk power-on lifetime: 25830 hours (1076 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 e0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  a1 00 00 00 00 00 a0 00      00:42:07.205  IDENTIFY PACKET DEVICE
  ec 00 00 00 00 00 a0 00      00:42:07.202  IDENTIFY DEVICE
  00 00 00 00 00 00 00 04      00:42:07.051  NOP [Abort queued commands]
  00 00 00 00 00 00 00 ff      00:42:06.443  NOP [Abort queued commands]
  a1 00 00 00 00 00 a0 00      00:42:01.444  IDENTIFY PACKET DEVICE

Error 42958 occurred at disk power-on lifetime: 25830 hours (1076 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 e0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:42:07.202  IDENTIFY DEVICE
  00 00 00 00 00 00 00 04      00:42:07.051  NOP [Abort queued commands]
  00 00 00 00 00 00 00 ff      00:42:06.443  NOP [Abort queued commands]
  a1 00 00 00 00 00 a0 00      00:42:01.444  IDENTIFY PACKET DEVICE
  ec 00 00 00 00 00 a0 00      00:42:01.441  IDENTIFY DEVICE

Error 42957 occurred at disk power-on lifetime: 25830 hours (1076 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 e0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  a1 00 00 00 00 00 a0 00      00:42:01.444  IDENTIFY PACKET DEVICE
  ec 00 00 00 00 00 a0 00      00:42:01.441  IDENTIFY DEVICE
  00 00 00 00 00 00 00 04      00:42:01.290  NOP [Abort queued commands]
  00 00 00 00 00 00 00 ff      00:42:00.682  NOP [Abort queued commands]
  a1 00 00 00 00 00 a0 00      00:42:00.662  IDENTIFY PACKET DEVICE

Error 42956 occurred at disk power-on lifetime: 25830 hours (1076 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 e0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:42:01.441  IDENTIFY DEVICE
  00 00 00 00 00 00 00 04      00:42:01.290  NOP [Abort queued commands]
  00 00 00 00 00 00 00 ff      00:42:00.682  NOP [Abort queued commands]
  a1 00 00 00 00 00 a0 00      00:42:00.662  IDENTIFY PACKET DEVICE
  ec 00 00 00 00 00 a0 00      00:42:00.605  IDENTIFY DEVICE

Error 42955 occurred at disk power-on lifetime: 25830 hours (1076 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 e0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  a1 00 00 00 00 00 a0 00      00:42:00.662  IDENTIFY PACKET DEVICE
  ec 00 00 00 00 00 a0 00      00:42:00.605  IDENTIFY DEVICE
  c8 00 18 30 f2 5a e0 00      00:41:56.015  READ DMA
  c8 00 20 08 f2 5a e0 00      00:41:34.052  READ DMA
  c8 00 18 f0 f1 5a e0 00      00:41:34.051  READ DMA

Poste le Tuesday 10 January 2012 18:25:39

Répondre Citer

Re: Problème récupération HDD

Envoyé par: nicola

Heu, change de disque.

--
On ne prête qu’aux riches, et on a bien raison, parce que les autres remboursent difficilement.
-+- Tristan Bernard (1866-1947) -+-

Poste le Saturday 14 January 2012 20:43:58

Répondre Citer