:-cb:-cb:-cb
bonjour a tous

j'ai actuellement un gros problème au demarrage
je me retrouve bloqué en mode terminal
je tape startx pour passer en mode graphique et voilà le message qui s'affiche

(texte recopié à la main il peut donc y avoir des fautes de frappes)

to make sure that you have the latest version
Module loader present
Markers--) probed,(***) from config file , (==) default setting , (++) from command line , (!!) notice , (II) informationnal , (ww) warning , (EE) error, (NI) not implemented, (??) unknown

(==)log file:"/var/log/xorg.O.log",tyme jun 17 17:15:56:2008
(II) module"ramdac already buit-in
error : api mismatch :the NVIDIA kermel module has version 169.12 , but this NVIDIA driver compoment has version 173.14.05 please make sure that the kermel module and all NVIDIA compoments have same version

(EE)NVIDIA (O) : failed to initialize the NVIDIA kermel module ! please ensure that there is a supported NVIDIA GPU in this system , and that the NVIDIA devise files have been created properly please consult the NVIDIA README for details

*** aborting***
(EE) screen(s) found , but none have ol usable configuration
fatal server error:
no screens found
geving up
xinit:connection reset by peer (error 104) unabee to connecte to x server
xinit:no such progress (error 3) :server error.



pour ce qui est de ma configuration avec mandriva power pack 2008.1 mise a jour

intel_agp : Intel Corporation|82945G/GZ/P/PL Memory Controller Hub [BRIDGE_HOST]
shpchp : Intel Corporation|82945G/GZ/P/PL PCI Express Root Port [BRIDGE_PCI]
snd_hda_intel : Intel Corporation|82801G (ICH7 Family) High Definition Audio Controller
shpchp : Intel Corporation|82801G (ICH7 Family) PCI Express Port 1 [BRIDGE_PCI]
shpchp : Intel Corporation|82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [BRIDGE_PCI]
shpchp : Intel Corporation|82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [BRIDGE_PCI]
uhci_hcd : Intel Corporation|82801G (ICH7 Family) USB UHCI Controller #1 [SERIAL_USB]
uhci_hcd : Intel Corporation|82801G (ICH7 Family) USB UHCI Controller #2 [SERIAL_USB]
uhci_hcd : Intel Corporation|82801G (ICH7 Family) USB UHCI Controller #3 [SERIAL_USB]
uhci_hcd : Intel Corporation|82801G (ICH7 Family) USB UHCI Controller #4 [SERIAL_USB]
ehci_hcd : Intel Corporation|82801G (ICH7 Family) USB2 EHCI Controller [SERIAL_USB]
unknown : Intel Corporation|82801 PCI Bridge [BRIDGE_PCI]
iTCO_wdt : Intel Corporation|82801GB/GR (ICH7 Family) LPC Interface Bridge [BRIDGE_ISA]
piix : Intel Corporation|82801G (ICH7 Family) IDE Controller [STORAGE_IDE]
ahci : Intel Corporation|82801GR/GH (ICH7 Family) SATA AHCI Controller [STORAGE_SATA]
i2c_i801 : Intel Corporation|82801G (ICH7 Family) SMBus Controller [SERIAL_SMBUS]
Card:NVIDIA GeForce FX and later: nVidia Corporation|GeForce 8500 GT [DISPLAY_VGA]
r8169 : Realtek Semiconductor Co., Ltd.|RTL8111/8168B PCI Express Gigabit Ethernet controller [NETWORK_ETHERNET]
ohci1394 : Texas Instruments|TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [SERIAL_FIREWIRE]
hub : Linux 2.6.22.18-server-1mdv ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub]
usb_storage : Unknown|TOSHIBA USB 3.5" HDD [Mass Storage|SCSI|Bulk (Zip)]
hub : Linux 2.6.22.18-server-1mdv uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
hub : Linux 2.6.22.18-server-1mdv uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
hub : Linux 2.6.22.18-server-1mdv uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
usblp : Epson Corp.|USB Printer [Printer|Printer|Bidirectional]
hub : Linux 2.6.22.18-server-1mdv uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
usbhid : MOSART Semi.|Wireless Keyboard & Mouse [Human Interface Devices|Boot Interface Subclass|Keyboard]

si quelqu'un a une solution a mon probleme merci d'avance
boiseu:-cb:-cb:-cb

Poste le Wednesday 18 June 2008 20:50:30