Bonjour,
je viens d'installer mandriva sur mon laptop,
quand je voudrais changer de résolution par exemple utiliser le 1280x800,
puis quand je test j'ai plein de couleur genre Arc-en-Ciel ?
je suis obliger de rester en mode : 1440x900 ?
j'ai une carte graphique GeForce GO 6100 et sur le panel c'est indiqué : nvidia gforce FX to gforce 8800, c'est normal ?
j'ai ceci dans le configurer le serveur d'affichage :
carte graphique : nvidia gforce FX to gforce 8800
Moniteur : Flat Panel 1440x900
Résolution : 1440x900 24Bpp
mon xorg :
[boolat@localhost ~]$ cat /etc/X11/xorg.conf
# File generated by XFdrake (rev 234840)
Section "Extensions"
Option "Composite"
EndSection
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerFlags"
#DontZap # disable <Ctrl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "be"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "evdev"
Option "device" "/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse"
Option "HWheelRelativeAxisButtons" "7 6"
EndSection
Section "InputDevice"
Identifier "SynapticsMouse1"
Driver "synaptics"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "Flat Panel 1440x900"
HorizSync 31.5-90
VertRefresh 60
# Monitor preferred modeline (59.9 Hz vsync, 55.5 kHz hsync, ratio 16/10)
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
# ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
EndSection
Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce FX to GeForce 8800"
Driver "nvidia"
Option "DPMS"
Option "DynamicTwinView" "false"
Option "AddARGBGLXVisuals"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1440x900" "1280x800"
EndSubsection
Subsection "Display"
Depth 15
Modes "1440x900" "1280x800"
EndSubsection
Subsection "Display"
Depth 16
Modes "1440x900" "1280x800"
EndSubsection
Subsection "Display"
Depth 24
Modes "1440x900" "1280x800"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "SynapticsMouse1" "SendCoreEvents"
Screen "screen1"
EndSection
[boolat@localhost ~]$
Merci
Poste le Friday 2 May 2008 12:44:16