bonjour,

Je me suis lancer dans l'installe de cette carte sous slackware 10 noyeau 2.6.7

tous c' est bien passer par contre quand je lance la connexion "adsl start" j' utilise le script de demarrage avec le drivers fourni:

# adsl restart
restart unicorn_pci_atm 8.35 Plugin /usr/lib/ppp-2.4.3/pppd/plugins/pppoatm/pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:8.35
/usr/bin/adsl: line 68: echo_success: command not found


donc aprés ca je verifie avec la commande :

# cat /proc/net/atm/UNICORN:0
ADSL: status ATM ready, modem state SHOWTIME L0, US rate 319Kbits/s, DS rate 1215Kbits/s
Current speed: US 0Kbits/s,DS 0Kbits/s
Current speed: US 0Kbits/s,DS 0Kbits/s
Bridged: 00:df:37:1a:82:c0
AAL5: tx 7 ( 0 err ), rx 4 ( 0 err, 0 drop )
AAL0: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )

?-( je comprend plus la ?

dans /var/log/messages :

Plugin /usr/lib/ppp-2.4.3/pppd/plugins/pppoatm/pppoatm.so loaded.
Nov 19 00:01:11 serverlan pppd[2659]: PPPoATM plugin_init
Nov 19 00:01:11 serverlan pppd[2659]: PPPoATM setdevname_pppoatm - SUCCESS:8.35
Nov 19 00:01:11 serverlan pppd[2660]: pppd 2.4.3 started by root, uid 0
Nov 19 00:01:11 serverlan kernel: unicorn_pci: ESI=00:db:ed:cb:4e:17
Nov 19 00:01:11 serverlan pppd[2660]: Using interface ppp0
Nov 19 00:01:11 serverlan pppd[2660]: Connect: ppp0 <--> 8.35
Nov 19 00:01:14 serverlan pppd[2660]: LCP terminated by peer
Nov 19 00:01:17 serverlan pppd[2660]: Connection terminated.
Nov 19 00:01:17 serverlan pppd[2660]: Exit.


et voici le script de demarrage * j' ai commenter la 1er ligne car je n' ai pas de dossier ". /etc/rc.d/init.d/functions " .

script adsl start:

#!/bin/sh

# Source function library.
#. /etc/rc.d/init.d/functions

# set to correct product (USB or PCI)
UNICORN="unicorn_pci_atm"
#UNICORN="unicorn_usb_atm"

# default VPI, VCI and encapsulation
VPI=8
VCI=35

# ANSI=1,G.lite=2,MULTI=3,G.dmt=4,
MODULATION=1

# pppd version 2.4.0b2 patched
#PPPD="/usr/src/ppp-2.4.0b2/pppd/pppd"
#PLUGIN="/usr/lib/pppd/plugins/pppoatm.so"

# pppd version 2.4.1
#PPPD="/usr/sbin/pppd"
PPPD="/usr/lib/ppp-2.4.3/pppd/pppd"
PLUGIN="/usr/lib/ppp-2.4.3/pppd/plugins/pppoatm/pppoatm.so"
#PLUGIN="/usr/lib/pppd/2.4.1/pppoatm.so"

RETVAL=0

stop() {
killproc $PPPD >/dev/null 2>&1
/sbin/modprobe -r $UNICORN >/dev/null 2>&1
}

start() {
/sbin/modprobe pppoatm
[ ! "$?" = 0 ] && return $?
/sbin/modprobe $UNICORN ActivationMode=$MODULATION >/dev/null 2>&1
[ ! "$?" = 0 ] && return $?
sleep 10
$PPPD plugin $PLUGIN $VPI.$VCI
[ ! "$?" = 0 ] && return $?
return 0
}

echo -n "$1 $UNICORN $PROTOCOL $VPI.$VCI $ENCAPS"

case "$1" in
stop)
stop
;;

start)
start
;;

restart)
stop
start
;;

*)
echo $"Usage: $0 {start|stop|restart}"
exit 1
esac

RETVAL=$?
if [ $RETVAL = 0 ]; then
echo_success
else
echo_failure
fi
echo
exit $RETVAL

si une personne a rencontrer le même problème ?

Poste le Friday 19 November 2004 09:18:18